I did that once too....don't lose that locating pin it is tiny.... also good info for XR XL etc 2 valve 200's if the advance springs are rusty and shot ...I made 2 out of ball point pen springs,,,yes pen springs
@Rickybiker
2 жыл бұрын
I’m just about to strip one of these engines glad I saw this I’m curious if the cam timed with the crank how did it bend a valve ? Is it due to it firing at the wrong time ? I just assumed as long as the timing was mechanically right the pulse wouldn’t make a difference it just wouldn’t fire up
@azzionsmith7187
11 ай бұрын
That’s why dirt bike and quad techs charge extra to fix your mistakes
@localenterprisebroadcastin5971
11 ай бұрын
😂..💯…I’ve made a very good living over the years fixing other peoples mistakes…thanks for the comment and view 👍
@user-bo2uf9nc3q
Ай бұрын
I just rebuilt my Honda XR 200 and I was wondering why it wasn’t starting and this is why it wasn’t starting because I wasn’t lined🤣🤣🤣🤣
@user-bo2uf9nc3q
Ай бұрын
Just about to start it right now I’ll see if that was the problem Because I just did a top and rebuild on it
@localenterprisebroadcastin5971
Ай бұрын
@@user-bo2uf9nc3q good luck 👍
@user-bo2uf9nc3q
Ай бұрын
@@localenterprisebroadcastin5971 fired right up after that 😁
@user-bo2uf9nc3q
Ай бұрын
Just got back from a four hour ride on it
@hybridssuck
Жыл бұрын
Very helpful!! Thank you!
@localenterprisebroadcastin5971
Жыл бұрын
Glad to hear thanks for the feedback 👍
@sydneyfrancis6500
2 жыл бұрын
THANK YOU!!!!!!!!!!!!!!!
@harlanmiller6396
3 жыл бұрын
Great video! Hows the ATC coming along? get the lighting all squared away?
@localenterprisebroadcastin5971
3 жыл бұрын
Yep just needed a ballast resistor to run the LEDs
@Op1zilla
Жыл бұрын
nice info, ggz-👽👾👍
@overthehillsandfaraway7411
Жыл бұрын
What's funny is I put my flywheel at the f mark perfectly, I pull off my pickup coil cover to find that it was almost exactly 180⁰ out... yet starts right up... is there something I'm missing?
@localenterprisebroadcastin5971
Жыл бұрын
🤷🏼♂️ thanks for the comment thouh
@briannash7960
8 ай бұрын
If the springs behind the pulse generator and that part your working on is broken will they caused it to struggle getting up to speed and struggle to start going
@localenterprisebroadcastin5971
8 ай бұрын
Thank you for the information and the comment 👍
@lofstrand127
3 жыл бұрын
It has a line on the side that goes up.
@ArturoG805
3 жыл бұрын
How do you take the screw off the ignition rotor
@localenterprisebroadcastin5971
3 жыл бұрын
Mine just unscrewed like any normal fastener 👍
@rondesjardins5721
Ай бұрын
Is there fire coming out of the blue wire when you crank it
@localenterprisebroadcastin5971
Ай бұрын
@@rondesjardins5721 not understanding the question
@rondesjardins5721
Ай бұрын
@@localenterprisebroadcastin5971 there is two wires coming out of the timing blue and yellow when you crank the motor is there fire coming from the blue wire going to the dci
@eduardocastrillocastrillo127
2 жыл бұрын
Amigo que clase de cedei le puso le fusiona la moto bien
Пікірлер: 29