This is a beautiful truck. Honestly it looks stunning with the way it is now without paint. Very nice job!
@collinwilliams2939
2 жыл бұрын
The fact after all the work, you left the same door chime makes you a boss.
@adrianwright5780
2 жыл бұрын
Are you pleased with the results? Looks good on video
@collinwilliams2939
2 жыл бұрын
@Adrian Wright I love it. I did a build a while back, and trust me, I did everything I could to keep the door chime just to through people off.
@Caponapo
2 жыл бұрын
The third row seat is a great idea!! 💡 it looks custom made for it!
@JustinTopp
2 жыл бұрын
I’m not always the biggest fan of black paint jobs but that looks sharp! Beautiful pickup
@jnork5005
2 жыл бұрын
Honestly, I would if chose white but I didn't want to repaint the dash 😆
@HD-C10
Жыл бұрын
This is probably my favorite interior that I’ve seen on a square body.
@jnork5005
Жыл бұрын
Simple and clean
@damonhappy9049
3 жыл бұрын
Looks good just the way it is. It doesn't need any trim
@andrewgodfrey4789
2 жыл бұрын
Sounds really good! I love the Black widows on my square body!!
@rayshawndorsey8167
2 жыл бұрын
Looks good I just got me one and I can’t wait to fix her up thanks for sharing your ideas .🔥🔥🔥
@WilloW0024
2 жыл бұрын
Nice touch with the Burb 3rd row.
@jonathanmontes6547
2 жыл бұрын
I like the way it is does not need wheels or anything.
@andrewayersman6923
2 жыл бұрын
I just built a 500 horse small block for my 83 4x4. These trucks are the funnest toys to just go ripping around in. Very nice setup you have there 👍
@jnork5005
2 жыл бұрын
I just finished building the fuel system, transmission, and engine. It's no longer LS1 but it's a gen 4 6.0 LQ9 with some go fast mods. Imma do an update video.
@andrewayersman6923
2 жыл бұрын
@@jnork5005 can’t go wrong with a 6.0. I’ve got one and I also have a cammed 5.3. LS is the future lol
@andrewayersman6923
2 жыл бұрын
@@jnork5005 just watched your new video. That is one clean truck and a hell of a nice drivetrain build. I’m sure it smokes the tires off just as well as mine does lol when you said tired of putting money into for it right now….I sure felt that lol
@jnork5005
2 жыл бұрын
@@andrewayersman6923 lol. I go through phases. Right now, I'm finished. I want to do vintage air and run that BMR front and rear coilover setup but I gotta chill it awhile.
@user-xi4rj4qd3p
Жыл бұрын
Man that was a good idea for seats! They look great and i wouldn't have guessed third row seats.
@jnork5005
Жыл бұрын
I been seeing them around more often now days. The back seat of a 14 up crew cab looks really good too. It's low back.
@user-xi4rj4qd3p
Жыл бұрын
@@jnork5005 Good info! Trying to figure what I'm putting in my 67, if I can ever get it on the road...
@jnork5005
Жыл бұрын
Just chip away at it. 1 small project at a time. It took be 3 years to get it on the road. It's down again and I'm swapping in a manual transmission.
@Cris_carman
2 жыл бұрын
this is a peace of art no joke the looks are insane I like it
@jnork5005
2 жыл бұрын
Thanks, I appreciate it!!
@trentdawg2832
4 ай бұрын
Man that is a beautiful truck…..nice build…i have a similar one but white and its a ‘73 with a vortech supercharged 5.3……i like that seat idea…i might have to look into doing that……mine has a terminator X system with a 220/220 cam , 3000 stalled th350 with 12 bolt 3.73 rear….it scoots….i have a 370” LQ9 that im gonna put in there once i finish building my 408 to replace the 370” thats in my nova…its a 11.15:1 compression LSA supercharged motor and it runs like hell!!!
@ericgonzalez524
2 жыл бұрын
looks bad ass without the center trim
@MintMonte87ACSS312
Жыл бұрын
Sounds nice. Think I’ll put these on my 08 Silverado once I rebuild the ls into something mean 💪
@SVTVSPENNY
3 жыл бұрын
I have an 85’ glad I found your channel, love the look of the truck! 🔥
@Bigknucklesandhands
13 күн бұрын
Sounds good
@jnork5005
13 күн бұрын
@@Bigknucklesandhands in this video it had venom 250s with an x pipe from black widow exhaust
@frankguerra3314
2 жыл бұрын
I love it..I just got done putting a LS in My 03 dodge Dakota.....
@jnork5005
2 жыл бұрын
LS Swap the world. Unbeatable value compared to other swaps
@truspirit1925
2 жыл бұрын
Love that seat...
@hastyhillfarmand4x480
2 жыл бұрын
The only thing I would do Is put some 2 inch wider and 2 inch taller tires on deep dish 15x10s, but... Would I sit there in person and think to say that... Lol , no, I would be drooling and trying to hide my chub.... Badass truck dude.
@jnork5005
2 жыл бұрын
Haha. I did just that with with Basset Race Wheels. I posted up a video of it here just recently
@oilfieldtrucker3225
2 жыл бұрын
She's a beauty!
@travisquintero8334
Жыл бұрын
Beautiful beautiful truck... I would have a satin finish over the Chrome areas myself. But that's just me.👍🇺🇲🇺🇲🇺🇲
@jnork5005
Жыл бұрын
Maybe one day I'll change it up.
@jgnzz5351
2 жыл бұрын
Any way you can make a video on the seat installation, it looks great. Truck look very nice!
@williamj7071
2 ай бұрын
SICK❤
@truspirit1925
Жыл бұрын
Beautiful truck man very clean and straight you did a great job on it.
@michaelsoto8299
2 жыл бұрын
Wow what a beautiful truck and bunch of goodies on it cheers
@jnork5005
2 жыл бұрын
Check out my new video. It's even better now
@Infinitevoyager
2 жыл бұрын
Building an 82 GMC Sierra just like it, only has single headlights. Put in a dbw stock 6.0 and a 4L80E. Thinking about putting on a hydrovac brake booster, have a couple of them.
@jnork5005
2 жыл бұрын
Hydroboost is the way to go. I wish I had that setup.
@rro9434
2 жыл бұрын
Beautiful Job. You are amazing brother Really Nice and Clean Job
@danbuchner1494
3 жыл бұрын
Kool truck that seat looks really good in it
@wildwhiskeywolf
11 ай бұрын
Incredible build. Super clean.
@4ME2DRV
3 жыл бұрын
I love it just like that.
@jnork5005
3 жыл бұрын
I changed the wheels so far. I have a set of Basset Race wheels now.
@DFox-ud3gx
2 жыл бұрын
I like them rims on her mine are silver just like them but now I'm going to paint mine just like yours , great video here
@jnork5005
2 жыл бұрын
I think the wheel and tire package would have been fine it I had a larger tire. I've since changed the wheels to Bassett Inertia with 275/60/15's all around. Looks pretty sporty. I have a newer video where you can see it.
@DFox-ud3gx
2 жыл бұрын
@@jnork5005 thanks Sir
@justinvanburen8259
3 ай бұрын
Bad ass truck!!!!
@TRIPLE6LORD
2 жыл бұрын
Sounds tough asf
@baldeaglegarage
Жыл бұрын
Nice looking truck! Sounds tough too!
@MacStrengthCo
Жыл бұрын
Sounds and looks awesome. Nice build. Subbed
@cnkilts
2 жыл бұрын
Gorgeous truck.
@michaelheathington9546
3 жыл бұрын
Beautiful truck! Can't wait to finish my 84
@jnork5005
3 жыл бұрын
Thanks, I've got it torn down building the engine. Taking video and should have something put together to post when it's all done
@sergiodiaz3904
2 жыл бұрын
I installed a 10 dollar aftermarket antenna from Walmart it's easy to install
@jackperry9369
2 жыл бұрын
Nice clean look thanks sir
@patrickgrenier4331
2 жыл бұрын
Mine was an hight Sierra 81 locking the same with 4 beam in the front and a car bumper in the rear but with huge rubber at each corner and with electric windows. I should have keep it 🥰🤑
@MillerGarage269
3 жыл бұрын
Love that look. I want the same color with chrome smoothies on mine someday
@jnork5005
3 жыл бұрын
If I did it over I'd use a 2 stage system and spray it with a satin clear instead of a single stage urethane. I'm running Basset race wheels now, but I like the smoothies or stock dog dish look
@Jessesquarebodytube
3 жыл бұрын
So beautiful!!
@crimsonbluejay
Жыл бұрын
Dime of a truck🔥 nice build. Subbed
@krisyaz1545
3 жыл бұрын
Very nicely done.
@jnork5005
3 жыл бұрын
Thanks, much appreciated!
@mechanicalmike7320
Жыл бұрын
Nice work! One of my favorite trucks.
@keepingitstreetproductions1414
2 жыл бұрын
Great job on your truck
@josearredondo2251
Жыл бұрын
I love this truck! Nice work!
@carlosmaldonado6954
2 жыл бұрын
Men I really love you truck looks awesome 😎 more videos of that beauty, also you have a new subscriber.
@johnmaxwell258
2 жыл бұрын
yessss dude loooks slick
@alchampion340
2 жыл бұрын
Nice truck, sounds 👍
@steppydaddy972
Жыл бұрын
Awesome 👌
@RedPillVegan
3 жыл бұрын
I like the truck
@keathbennetch8007
10 ай бұрын
Beautiful truck man
@phoenixarizona8441
2 жыл бұрын
Badass Truck
@Joekool300
2 жыл бұрын
Nice man.
@jimstark1887
2 жыл бұрын
Beautiful truck, sounds "bitchin"! I had to subscribe so I can keep up with what all you do to it. Have a good one.
@jnork5005
2 жыл бұрын
Thanks, I appreciate it!
@williepotts2185
2 жыл бұрын
Pretty Nice dude!
@HILLBILLY_HARD
3 жыл бұрын
Nice truck
@jamesdavidson9626
2 жыл бұрын
Fantastic build my new friend..I liked an Sub'd..thats badass..lol
@kevinking1750
Жыл бұрын
Cool.
@JoseJimenez-nn3kf
2 жыл бұрын
Nice
@truspirit1925
2 жыл бұрын
I would to see this on 4x4 frame...I'm building one now that looks similar but this one ....yours....is much nicer....beautiful truck.
@jnork5005
2 жыл бұрын
My dad has an 86' K10 we are going to start working on after the first of the year. So I might throw up some video of it too. I just finished rebuilding the drive line and rewiring mine. I'll do a video soon.
@jdonez8347
Жыл бұрын
Beautiful fkin truck buddy, saw the thumbnail and it drew me right in, had an 83 all black w a 454 in my teens but unfortunately she rolled once or twice, wasn't as nice tho. Seeesh 🤩🤤
@frwystr
2 жыл бұрын
siiick
@SaSaUrmULi1
3 жыл бұрын
🔥💯beautiful beast 🤙🏽
@nonameisthename138
2 жыл бұрын
That's a nice truck bro!! I hope you still have it..🤞
@jnork5005
2 жыл бұрын
Still do, just took it to the drag strip a couple weeks ago.
@nonameisthename138
2 жыл бұрын
@@jnork5005 That's great bro, so many guys invest in their rides then sell them for whatever reason. I have an OBS....92, I'll have it til I check out!!
@jnork5005
2 жыл бұрын
@@nonameisthename138 same here. I'm done starting over, lol
@nonameisthename138
2 жыл бұрын
@@jnork5005 😂😂 I know what you mean 👍
@newmantv5668
3 жыл бұрын
like that matte black
@XavierTerry-ds5sz
11 ай бұрын
I like it!!
@CarolinaMikeGarage
3 жыл бұрын
That’s clean man. I’m building one on my KZitem channel as well. It’s a GMC as well same year and I’m putting a 6.0/4L80e BTR stage 2 cam. I picked it up rattle canned matte black but I want to get it painted with a satin finish.
@jnork5005
3 жыл бұрын
Nice. I just built this 4L60E with all 4L70 internals and added the Sonnax close ratio 6 pinion planetary and added a couple clutches to the 3-4 drum and made a bunch of pressure modifications. I hope it holds up 😬. If you do it, use a base coat/clear coat and use a satin clear. Easier to lay than this single stage. Good luck with it! Hard to find these trucks now.
@RedEyedPatriot
3 жыл бұрын
Love my 82 Gmc. 5.3 swap goin down in 2 weeks. 5speed too. Video of it on my channel. Rust Free but I call her the Flaked Tater 😂😎🤘
@jnork5005
3 жыл бұрын
Lol, I'll check it out. I want to run a standard shift in mine it's just not in the budget right now. Maybe after suspension and brakes are done.
@RedEyedPatriot
3 жыл бұрын
@@jnork5005 I've got a 89 nv3500 5speed..only rated for 300ft pounds of torque. Wish i could find a 6speed or nv4500 to use.
@jrobles1019
3 жыл бұрын
I have the same setup except I’m using Brian tooney turbo cam, and Holley terminator standalone
@jnork5005
3 жыл бұрын
Are you going to boost it? I ran a boosted 5.3 that melted #7 piston twice on 93 Oct. Narrowed it down to the coolant cross over. Truck motors don't have a crossover and I had an air pocket and melted that piston twice pointed at the water jacket. Also, tune it for E85 and you won't regret it.
@jrobles1019
3 жыл бұрын
@@jnork5005 life is way better with boost. Yes I plan on boosting it! Did you hook up your steam lines correctly?
@chancecolwell3823
3 жыл бұрын
Can you do a video on the wiring you had to go to put the ls in it
@JayTX.
2 жыл бұрын
Got buckets in my 85 but wanting to put a bench in ....the Tahoe seats are a good idea
@jnork5005
2 жыл бұрын
I'd like to see the back seat put of a 14 up crew cab. They're lowback
@killashizilla3830
2 жыл бұрын
Sounds sooooooo mean!!!
@marvinyoung4170
Жыл бұрын
If u never got a antenna man I got one u can have I have a 1982 gmc long bed the daddy to urs it’s a 2500 long bed with 454 beast black on black but u got a badassssss truck too
@jnork5005
Жыл бұрын
I still need one!!!! Do you have any social media platforms I can contact you on?
@marvinyoung4170
Жыл бұрын
Yes it’s Lee young in alabama u will see a red c10 truck
@marvinyoung4170
Жыл бұрын
Facebook
@adamprice4177
2 жыл бұрын
Got an 87 6.0 myself
@martincruz1438
2 жыл бұрын
You have a Nice truck ,,,i have a 85 for 25 years i like to swap the motor from 98 tahoe is to complicate can you have information please,,,thanks
@jnork5005
2 жыл бұрын
It's not terribly difficult. There are a bunch of videos on how to do a swap. I'd search out those videos.
@simonsautorepair8082
2 жыл бұрын
Hi sir I love that color what did you use can you share the part number of the paint..???
@jnork5005
2 жыл бұрын
I don't remember the part number but it's made by "Kirker Paint" and it's the single stage "Black Satin"
@simonsautorepair8082
2 жыл бұрын
@@jnork5005 thank you
@colefrench8617
Жыл бұрын
Wat kind sterio is tht is ur truck I love tht design
@jnork5005
Жыл бұрын
It's a Retrosound stereo. I think the Laguna series. Can't remember
@joeyhaywoodakamashedtater6132
2 жыл бұрын
Awesome build. What did u do about the drive shaft
@jnork5005
2 жыл бұрын
I had one made. Steel with Spicer joints
@jamesunderdal8976
Жыл бұрын
Doing a similar build with a stroked and carbed 6 liter with black widows.
@jnork5005
Жыл бұрын
Why Carb?
@jamesunderdal8976
Жыл бұрын
@@jnork5005 i understand carbs grew up using them and they work better for me the only computer i use is the MSD box to run the coil pacs man for me i prefer carb over injection anyday but thats just me.
@jnork5005
Жыл бұрын
@James Underdal I like the ease of tunability for EFI. There is a learning curve but you'll thank yourself in the long run.
@jamesunderdal8976
Жыл бұрын
@@jnork5005 see for me thats why i like carbs man because i know them and they are easy for me but if u like the injection and understand it man i would stick with it nothing wrong with it
@vidalhernandez6054
2 жыл бұрын
Una joya con ruedas
@adrianwright5780
2 жыл бұрын
Nice truck!!! can you send the paint code? She looks damn good
@jnork5005
2 жыл бұрын
It's "KIRKER BLACK SATIN" it's a single stage and they only make 1 black satin and you can buy it as a kit.
@coltkline9207
2 жыл бұрын
Can you tell me what year Tahoe the seat is out of? Thanks.
@jnork5005
2 жыл бұрын
2015 I think. I think the rear seat out of a crew cab 2014 up silverado would fit better since the back isn't tall.
@Backwoods_870
Жыл бұрын
💣💥💯👍🏻👍🏻👍🏻
@lmb1911
Жыл бұрын
Great sounding truck. Are you using a x pipe or H pipe?
@jnork5005
Жыл бұрын
X-pipe
@franklainfiesta7430
3 жыл бұрын
LMC truck have the new replacement antena
@Chevyboii
8 ай бұрын
How much would you charge to do another truck like that with a 355 instead of a ls?
@jnork5005
8 ай бұрын
It's hard to say. Depends on a lot of variables. My truck is torn down again. I'm in the process of building the turbo hot side piping and T56 swap. So it'd be awhile before I could get to it. I'm in Florida also
@hotrod_kris9395
3 жыл бұрын
Clean truck! What's your wheel tire setup? Thank you
@jnork5005
3 жыл бұрын
They were 17x9, Jegs Baja 8's I think. Something like that. I bought some Basset Race Wheels and have a different setup now. I should be posting a video soon after I get this motor assembled.
@hotrod_kris9395
3 жыл бұрын
@@jnork5005 thank you for your time!
@enermaxstephens1051
2 жыл бұрын
What seats did you bolt to the OEM seat fram, and are they comfortable on long drives?
@jnork5005
2 жыл бұрын
I've taken it on 3-4 hr rides and it's fine if you like a firm seat like I do. It's the 3rd row seat out of a 2014ish Tahoe
@patrickmacord8725
2 жыл бұрын
Great video, who makes the gauges
@jnork5005
2 жыл бұрын
Dakota Digital
@irvingolivissr.3172
2 жыл бұрын
@JNork I heard you say that you do tuning and I was wonder info you hand a contact info for some business? Also if you don't mind what is the camshaft part number?
@jnork5005
2 жыл бұрын
I don't have the part number but it's the "Tsunami" camshaft from Texas Speed. I don't typically do tunes on any past Bolton. It gets too time consuming and a lot of people aren't good mechanics so I end up troubleshooting all their problems. Lol
@irvingolivissr.3172
2 жыл бұрын
@@jnork5005 kzitem.info/news/bejne/mZ6wsJOOoIWEl3o this is my car with the conventional motor in it. I want to swap it that why I was asking about the tuning. I did all my work.
@maleikfaheem8975
2 жыл бұрын
Love the truck bro! I bought the same seat for my 86, do you have any info on how you made the bracket? Thanks
@jnork5005
2 жыл бұрын
I used the factory frame and welded brackets for the new seat to bolt to. I'm 6'3 so I didn't need any adjusters and mounted it solid to the floor. It still flips forward to get behind the seat tho
@maleikfaheem8975
2 жыл бұрын
Thanks a lot
@TallGarage
2 жыл бұрын
@@maleikfaheem8975 what is the seat from?
@ulisesjaramillo9743
3 жыл бұрын
Do you have more info on seat mounting
@jnork5005
3 жыл бұрын
I'll make a video soon
@ulisesjaramillo9743
3 жыл бұрын
😎
@evangriffith8836
2 жыл бұрын
I just cut and pounded the center of the bracket flat. Made tabs and mine fit right it. Not my favorite way of doing it but it works.
@juliangarza1144
3 жыл бұрын
Where did you get the dash from ? Sweet ride
@jnork5005
3 жыл бұрын
It's Dakota Digital. It was ordered from one of their suppliers, just don't remember which. I'd have to dig up the receipt.
@ThatC-rc2ig
2 жыл бұрын
Where did you get those headlights I have to know
@jnork5005
2 жыл бұрын
Either Amazon or Ebay. I want to say they were around 80bux. You have to get longer screws for the beauty rings and the fit into the stock bucket. You will also have to run harness adapters to use your stock chassis harness. They are super nice though
@jrobles1019
3 жыл бұрын
Where’s the turbo mounted?
@cesarg1976
2 жыл бұрын
He said he used to have a turbo 5.3 at 4:05 this one doesn't have a turbo
@DayNNyteDJs
2 жыл бұрын
No trim. Leave that thing black. Just clean up under the hood and get your brakes working and you are done. Beautiful truck.
@jnork5005
2 жыл бұрын
I thought about having it wrapped in gloss black. Whatcha think? I still haven't put it on yet 🤣
Пікірлер: 257