Just picked up a 85 500SL that’s been in storage for 10 years. Gotta learn all I can about these.
@sophiathe380sl
11 ай бұрын
Congrats on the new purchase and welcome here! I’ve been making all kinds of videos if you’d like to work on some of the easy stuff. Get the chain and guides looked at by a mechanic. Look at the rubbers on the front subframe. Good luck!
@dansalmi7332
Жыл бұрын
Thanks for tips in your video. This will be my next project. Winter is coming to Boise, and that gives me 6 months of garage time. How are your A-pillar and door seals. That is on my radar for this winter too.
@sophiathe380sl
Жыл бұрын
That’s great. It was an easy one… Thanks for the suggestion. I’ll take a look but I think they’ve been replaced.
@stretoo
Жыл бұрын
I like your approach to carrying out this type of work by yourself. However there is one thing I would like to clarify: the height of the car, respectively from the rear, depends on the condition of the springs and the silent blocks placed at their top and not on the shock absorbers. If you think your car is not at the right height, this is where you need to take action. Thanks for the video.
@sophiathe380sl
Жыл бұрын
That's great to know. I'll have to check that out. Thanks for the comment. Do you have to remove the springs to get to the silent blocks? How difficult are they to replace?
@stretoo
Жыл бұрын
Yes, you have to remove the springs. It's not difficult ias long as you have the special spring compressor for this task. This is made of two disks that are inserted between the coils of the spring and that are connected with a threaded rod. You will find a demonstration in video on the channel of Mike Mercs (@MikesMercsandothercars in 2020 I believe). Without this tool it is potentially dangerous.@@sophiathe380sl
@guyk4819
Жыл бұрын
@@sophiathe380sl Hey friend this Guy , i talked to you last time about my 380 sl front frame problem , i got a used one from texas , i need to know if your mechanic can help me put it on please my guy has some family problem out of town . i'm in inland empire (Upland)
@rhendriks6359
Жыл бұрын
Thanks a lot! Also my next project. 380SL, 1985. Greetings from the Netherlands, Europe.
@sophiathe380sl
Жыл бұрын
👍👍 Amsterdam is one of my top favorite cities.
@excelerater
Жыл бұрын
FYI they do make a shock tool,much easier than a vice grips..Pneumatic also works well
@sophiathe380sl
Жыл бұрын
I bought the tool from Kent. It worked well for the front because of the limited area. The vice-grips worked great for the rear.
@excelerater
Жыл бұрын
@@sophiathe380sl Lisle 20400 is one I have used and I have seen a few others .
@excelerater
Жыл бұрын
@@sophiathe380sl my car is still at the shop,picked up a new distributor and crank sensor wire...That should do it ..Pray ! lol
@yassinekhaled9880
11 ай бұрын
Hello thank you for the great video. Can you please share the brand and part number of the shocks
Пікірлер: 17