That is the best and coolest looking interior I have ever seen amazing job man. What I like about it is you made it look like it came that was but if I hade to choose my favorite part I would be the way you wrapped the seats and the the door panels
@alvarochavez1190
4 жыл бұрын
That is one badass looking interior
@dalepritchard3335
5 жыл бұрын
Very nice. I wish I had your talent. I'd do something like that on my 89 Silverado. Great video.
@19ADAM80
9 жыл бұрын
Nice clean work, thanks for sharing..
@BIG44studios
11 жыл бұрын
lovely work man awesome job
@brandonwilliams8623
5 жыл бұрын
Great job. I stuck with a new bench seat and i but a custon sub box behind it with 2 12" subs in it and i have a 76 k20 so my back is much bigger and i have alot of room to do that but you did good
@elgorillafitnessgroup9313
6 жыл бұрын
Excellent job
@chrisgreenfield5898
8 жыл бұрын
beautiful work
@DUBDUECE05
11 жыл бұрын
Man you do beautiful work
@jdpower5552
9 жыл бұрын
Thanks for sharing...nice job!!!
@sandhollowhomestead6972
6 жыл бұрын
Extreme Truckology man! Love the craft!
@charles1matt
6 жыл бұрын
Sand Hollow Homestead "Thank you sir!"
@dashow2002
6 жыл бұрын
Nice custom job !
@CarlosAlberto-xx3of
8 жыл бұрын
Nice ! Good and creative job done right
@RedneckKustumz
10 жыл бұрын
That looks amazing...
@alexvecchies1729
5 жыл бұрын
Nice truck man big thumbs up
@charles1matt
5 жыл бұрын
Thank you, it was a customers though. I do own a Chevy truck too, lol
@gnjack6
6 жыл бұрын
Some more great work Matt
@charles1matt
6 жыл бұрын
BlackJack thank you for watching all these videos!!!
@charles1matt
11 жыл бұрын
Thanks for the comment and give me a call anytime!
@gguevara1223
10 жыл бұрын
NICE WORK
@charles1matt
11 жыл бұрын
Thanks for being first to watch and comment!!! Standard cab pick-ups start at 1800, this was about 2200 plus parts. All together this set up ran 3500-3800. An even 5000 I could do something extremely nice. Thanks again and call anytime,
@charles1matt
11 жыл бұрын
Thanks!
@08mcneil
9 жыл бұрын
Very awesome man. I would have gone with a bench seat. But other than that i really like it. Might do something like that to mine.
@ClubFreeze501
10 жыл бұрын
Nice & clean
@gerardoolivares7757
11 жыл бұрын
Nice job
@camc615
11 жыл бұрын
U are the truth I'm going to get u to do my 86 Pontiac Grand Prix this summer
@luisguevara7402
6 жыл бұрын
Nice and Clean
@carlosthomas5020
5 жыл бұрын
Nice work omg....
@505BOSE
7 жыл бұрын
Those door panels are sick
@billygreenhorn9275
7 жыл бұрын
very sick
@ChuyDuranZac
3 жыл бұрын
Death bed sick! 🤣
@charles1matt
11 жыл бұрын
Hi, I made the bottom half and covered the original door panel, You can order the aftermarket bottoms in carpet only. Thanks for watching,
@bubbycrane9284
3 жыл бұрын
Love the truck and interior, good work man, you should do a video of the truck when it is fully done.
@charles1matt
3 жыл бұрын
Thanks and it was a customer from out of state so I never got to see it again. He only had those wheels on it at the time so it would fit on the trailer for delivery
@bubbycrane9284
3 жыл бұрын
Oh, that's cool man, if you do this stuff a lot. it probably wouldn't be a bad idea to do more videos, id watch them.
@charles1matt
3 жыл бұрын
@@bubbycrane9284 oh I have 100s of videos!
@charles1matt
11 жыл бұрын
Hi again sorry for the late reply, Door panels are $150 each and the bottom half ranges from $60-125 each depending if you want carpet or custom covered.
@oscarsanchez5830
11 жыл бұрын
The seats and the center seat as well.
@MarkBurfeind
10 жыл бұрын
How did you install the after market seats. I'm wanting to put new seats in my 86 scottsdale.
@fujijilm
8 жыл бұрын
Ok, so for the billet aluminum dash trim pieces I had a question, I noticed on the passenger side the AC vents seem to not have any way of directing the air flow, is that correct?, or can you still adjust the vents to direct air where you want it. Thank you, and nice video and build!
@larrypotts1688
5 жыл бұрын
Sweet!!!
@acedean7198
9 жыл бұрын
hey man, i have a 1985 dodge pickup that im trying to redo the door panels in. Do you have any tips? and where did you find that new seat?
@charles1matt
11 жыл бұрын
I think they were from an early 2000's olds integra and the center was from a late 90's chevy truck, but the center console lid sucked to cover, mayber find a different one? Also The frames for mounting were from LMC for after market buckets. lates 90,s Dodge ram complete setup might work too and look about the same??? Hope that helps,
@RevRandyGarage
9 жыл бұрын
I need some of those speaker cabinets
@jhh70
8 жыл бұрын
Where did you get the billet pieces for the doors and dash? thanks
@wesleywells8373
9 жыл бұрын
I'm currently making remodels to my 1985 trucks interior...and I was wondering where is a good place to buy parts? Or even a cheap place to take it to be done?
@frankwoods6179
6 жыл бұрын
What year this seats came off and center console
@JeremyRemele
7 жыл бұрын
Matt, any way we can get in touch over the phone? I'd like to get some custom interior work done for my 78 GMC Suburban (Door Panels), mostly basic stuff. Thanks man. Btw, I live in Phoenix.
@oscarsanchez5830
11 жыл бұрын
Hey matt if you don't mind me asking but what did you get those seats out of? I would really like to get them.
@juanthedon24
9 жыл бұрын
On the bottom half of the door panel did you use an adhesive to attach that custom piece. I'm asking to see if I could do the same to add the carpet/vent to my 86 c10
@charles1matt
9 жыл бұрын
Juan Villegas I added door panel clips to the board before covering it, that way no screws are used.Thanks for watching,
@jasonwiechec6966
9 жыл бұрын
Awesome work. What did you use for the rear panel for the speakersand all. I'm looking to build one for my 85 C10. But Ialso need to mountan ampand sub.
@charles1matt
9 жыл бұрын
Jason Wiechec wood and panel board and covered with vinyl
@josepho5055
8 жыл бұрын
Matt, the seat track shown around 1:00 to 1:05 who make it? Please Advise? Outstand Work! Thank You Joseph
@aprilblack1588
6 жыл бұрын
Nice! What state are you in?
@patrickjamesmahon5130
11 жыл бұрын
Hello Matt, my name Is Patrick. I'm in the process of redoing my interior of my 86 chevy c10. I'm planning on making it look like the inside of a gov. issue humvee. I salvaged 2 bucket seats from a 85 chevy version of my truck but it's a more of a branco w/ the same front body look of my truck. But the bass of the bench seats & the seats I salvaged are different is there a way for me to modify the new seat lags to work with the bass of my truck?
@KingGiles
11 жыл бұрын
Man that's bad ass, for the same exact thing in my c10, what would I be looking at, and I still wanna get the ss did.
@mshackelford1980
7 жыл бұрын
Hey Matt, I'm curious how the top of the dash looks, where the speakers are. The dash is wrapped as well right?
@charles1matt
7 жыл бұрын
mshackelford1980 dash was a 300 replacement pad, nothing custom
@1962Project
10 жыл бұрын
do you have a part number for the LMC aftermarket bucket seat mounts? I can't find them in the catalog.
@charles1matt
10 жыл бұрын
Sorry no, I found them online in their aftermarket seat section, if that helps?
@johnhorsh1659
11 жыл бұрын
well how much would you charge to just do the door panels with the "SS" emblems on the door panels and a chevy emblem on it??
@jasonbyle2284
Жыл бұрын
What seats are those out of?
@bennylozano7485
8 жыл бұрын
what are the seats out of.
@krypto7996
7 жыл бұрын
what seats are those
@DD-mg9rf
10 жыл бұрын
Where did you get those chairs and center seat/cup holders from , I need them I cant them impossible
@charles1matt
10 жыл бұрын
seats from 2000/2002 olds intrigue and console is from a 99 chevy truck, then the seat frames are from LMC aftermarket buckets seat mounts. Thanks for watching,
@marcom7369
7 жыл бұрын
Hey Matt, what kind of foam is use to make the Chevy design if I may ask.
@charles1matt
7 жыл бұрын
Marco M landau foam
@welderman4406
8 жыл бұрын
Would you ever consider doing a 70's dodge truck interior? If so what would it cost?
@ElderIvoryWilliams
10 жыл бұрын
Hello , great job . That's exactly the color I want to do my 89 c15. What material did you cover doors panels with , leather? Also did you cover dash in same material or paint ? Lastly I didn't see the answer about what you took the seats out of . Details details lol. You know you can't put something up so inspiring and not give details :-) Thanks .
@charles1matt
10 жыл бұрын
The color is black/ebony nuance vinyl, the dash is a replacement, console is from a 99 chevy truck, and seats are from a 2000 olds intrigue. Sorry about no details, I had no idea so many people would love this setup so much. Thanks for watching!!!
@mkroberts720
5 жыл бұрын
Is that a 4way stretch vinyl?
@lazysteve73
9 жыл бұрын
what did that interior cost to build? I'm looking to do something very similar to mine
@chaseware3181
5 жыл бұрын
I redone my entire interior for 5000 on Brotherstrucks.com
@BuySellTrade-g7i
3 жыл бұрын
$5000 I’m into it $1050 and still have to order the two most expensive items ( door panels and dash pad) so figure another $1000
@johnhorsh1659
11 жыл бұрын
do u make these peices from scratch, or can some one like me order a kit just for my doors on my 86' ?
@oldmanmtb1443
9 жыл бұрын
I got the same truck how much something like that cost
@oscarsanchez5830
11 жыл бұрын
Thats Beautiful work man. How much to do the same thing in my 84 c10? Oh yeah can I get your business info.
@atlbikelifektm5254
8 жыл бұрын
how much do u charge to do my 83 c-10
@aaronsamaniego468
10 жыл бұрын
Awesome work, I would like to see if i could order the speaker panels you make. Can you shoot me a price
@charles1matt
10 жыл бұрын
I would love to, but I would need the vehicle again for a pattern, since I did not make a template for making more copies. Sorry about that, but I did not think this job would have such an demand for reproducing. Thanks for the view and comment!!!
@Blakep7704
5 жыл бұрын
That carpet fits great what company did you get it from?
@charles1matt
5 жыл бұрын
Blake Parker anywhere you order it from, it will ultimately come from ACC, auto custom carpet.
@Blakep7704
5 жыл бұрын
@@charles1matt I picked up a kit from lmc, the fit was ok. Didn't like that the heel pad wasn't located in the correct spot.
@charles1matt
5 жыл бұрын
Blake Parker plus you have to really get them centered on the installation or they look funny and off. great job on doing it yourself, that's how I started!
@TheRandomDead
2 жыл бұрын
Do you make interiors for suburbans?
@charles1matt
2 жыл бұрын
One at a time and I have a 87 here now
@ndomakongsuh936
8 жыл бұрын
How much did it cost to do everything?
@charles1matt
8 жыл бұрын
about 3800 usd
@Jack-zc9el
10 жыл бұрын
What would be the total cost for a complete interior restoration like this minus the flame and chevy emblem detail? Roughly...
@Jack-zc9el
10 жыл бұрын
And with factory bench seat just wrapped instead. ..
@charles1matt
10 жыл бұрын
Brody Sears 1800-2500
@pgarciapg3pg
4 жыл бұрын
Is there a instruction video on how to install the universal seat brakets
@charles1matt
4 жыл бұрын
They are not universal, they are made for this truck only. Many customers have told me they are not available from LMC anymore? I'm not sure if that's true or not?
@pgarciapg3pg
4 жыл бұрын
Im using them on that same type of truck do u have to mess with them to make them fit and do they fit any bucket seats or is it a specific one?
@pgarciapg3pg
4 жыл бұрын
I bought a pair im just lost 😂 cuz the legs don't have hole to mount so I don't know if I have to weld them or just make them fit
@charles1matt
4 жыл бұрын
@@pgarciapg3pg oh yes my bad the frame to the new seat itself will need to be bolted or modified to fit, then the problem with track for it to slide is another story. I made these in the video stationary no sliding track, but small 1 inch tall universal track may be an option on tip on the frame kit? Depends how tall it sets the seats up for you. Wish i was in person to help you my friend. Fell free to call me tomorrow if you think i could help anymore? 615-612-1477
@pgarciapg3pg
4 жыл бұрын
I sure will thank u
@PrvtValentine
11 жыл бұрын
how much did the whole job cost you, i need to redo the whole interior in my 83 stepper
@chaseware3181
5 жыл бұрын
I redone my entire interior for 5000 on Brotherstrucks.com
@retdreams661
11 жыл бұрын
An about how long does this normally take?
@chaseware3181
5 жыл бұрын
I installed my entire interior in 2 weekends by myself and it cost 5k for the parts
@simonsautorepair8082
4 жыл бұрын
Where do you live sir I like your job I need. How much you can charge me for some doors panel for a 1982 Chevy c10 please let me know thanks
@skollch
8 жыл бұрын
where did u find those seats?
@charles1matt
8 жыл бұрын
2002 olds intrigue I think
@skollch
8 жыл бұрын
+matt1989cars thanks!
@charles1matt
8 жыл бұрын
+skollch np
@manuelvega2181
6 жыл бұрын
matt1989cars Where did you get the mounting brackets sir.
@justindatkins1234
9 жыл бұрын
I noticed the video is a little over a year old. You still in business?
@charles1matt
9 жыл бұрын
I have become one, so I am always here dwelling in Nashville TN. 615-612-1477 call anytime.
@justindatkins1234
9 жыл бұрын
I'll save your number for sure man. I bought a 86 c10 today body on it is fantastic interior needs a lot of work. Thanks for the fast reply also!
@toddbob55
4 жыл бұрын
All that work to a long bed? Short beds are much better investment.
@charles1matt
4 жыл бұрын
Not mine and to each there own. I understand though, I like the short beds too. This video has alot of views and you are the first to mention that?
@retdreams661
11 жыл бұрын
Do you have a number I can text photos or email I can send photos to so I can get a price on what I want done?
@daltonandrew168
6 жыл бұрын
Sum body skipped leg day
@charles1matt
6 жыл бұрын
Dalton Smith he brought the truck from out of state to have the interior done and he had to use those wheels to fit the truck on a trailer, lol. I wish I had pics of the finished truck with the big 33s or whatever he had for it?
Пікірлер: 121