Replacing my water pump and really scratching my head on that power steering mount to get the belt off. You saved me brother. This is the kind of video that makes KZitem such a great tool. Thanks Troy!
@troysneadbloodhoundgarage
4 жыл бұрын
Thank you Byron I really appreciate the words. You take care and be safe!!
@jimmyallen8210
3 жыл бұрын
Skip to 5:30 to see the bolts pointed to. This video was a big help. Thanks!
@everyoneelsegotthego
3 жыл бұрын
You helped a ton. As stated earlier, this is the same setup for a 90 4.2 YJ. Crazy arrangement. Greatly appreciated!
@leopom1978
4 жыл бұрын
“I just started loosening shit”. Haha. Couldn’t have said it better myself. This video helped a lot. Thanks.
@troysneadbloodhoundgarage
3 жыл бұрын
That was about it, thank you very much I really appreciate it!
@troysneadbloodhoundgarage
3 жыл бұрын
Sorry for the delayed response
@Eagle_1985
Жыл бұрын
Thank you sir that was just what I needed… good man
@64_Falcon
3 жыл бұрын
Thanks for you video. Literally rebuilt the engine and this darn pulley was defeating me. Didn’t think to use the ratchet on the back.
@troysneadbloodhoundgarage
3 жыл бұрын
Glad it helped!
@markhill7678
3 жыл бұрын
Thank you buddy I have been searching for this video, same as my 88 yj
@petegreer3822
3 жыл бұрын
Thank you. Very helpful
@johnballentine3458
4 жыл бұрын
This video helped allot. Thank you
@troysneadbloodhoundgarage
4 жыл бұрын
You are very welcome! I am glad it helped!
@danielbryant5803
10 ай бұрын
I have a 86 Grand wagoneer that needs a alternator belt replacement due to stretching but first i have to get power steering belt out of the way..i couldn't figure out how power steering pump pivoted..it doesn't have a slot like alternator,,,, Thanks brother!
@KENFEDOR22
5 жыл бұрын
Thanks! My CJ has cold start squealing from this belt. Pain in the neck to figure out which bolts pivot the pump.
@troysneadbloodhoundgarage
5 жыл бұрын
I am glad it helped!!
@troysneadbloodhoundgarage
4 жыл бұрын
Glad it helped!
@troysneadbloodhoundgarage
4 жыл бұрын
You are very welcome! I am very glad it helped!
@ajl9491
Жыл бұрын
Thanks man!! F ing thing was driving me crazy !!!!!!
@TheThirstycoyote
3 жыл бұрын
Good enough for me 👍 thanks
@troysneadbloodhoundgarage
3 жыл бұрын
Glad it helped, thanks for watching my video
@tdcbass
2 жыл бұрын
I spent hours trying to figure this out in 114 degree heat after replacing water pump, left belt off. I have the Howell Fuel injection system installed and it makes access a nightmare. Thanks
@tomdonnelly611
2 жыл бұрын
Excellent video and thanks for sharing... I have followed your directions to a tee but unfortuantely I cannot get the unit to pivot... or budge at all. Any suggestions would be appreciated! Thanks again!
@fredjohnson7497
3 жыл бұрын
thanks troy , i to was stumped by this adjustment on my 90 yj . It sure is a mess of bolts for a PS pump .
@troysneadbloodhoundgarage
3 жыл бұрын
You are very welcome! I am glad it helped
@tomdonnelly611
2 жыл бұрын
Also… correct me if I am wrong, but is that a 1974 Nebraska license plate in the top left next to your Bloodhound garage sign? GBR!
@john6122
3 жыл бұрын
Are the bolts metric? My 86 CJ7 adjustment mounting bolts are metric. Good video.
@troysneadbloodhoundgarage
3 жыл бұрын
No, the bolts on mine where standard
@troysneadbloodhoundgarage
3 жыл бұрын
Thank you for the "Good video" comment. I really appreciate it
Пікірлер: 30