Hey all, I just changed the motor mounts on my 91 and I found a way to change them out without messing with your suspension. First off, I had the engine out. Im sure it’s a lot harder to do with the engine still in lol. Anyway, you take a 10” extension, a 3” extension, a universal, the socket, and a ratchet, all 3/8” drive. You can fit all that up through the frame between the frame and lower control arm bushing. It does take a little maneuvering but once you get it on the backing nut, loosen the mounting bolts and bam. I changed mine in 15 minutes a piece. Hope this helps out!
@Eddie1gonzalez
2 жыл бұрын
Make a video lol
@kennwats1111
3 ай бұрын
That's how we do at the shop.
@cj8172
2 жыл бұрын
Pity GM didn't just weld those 3 nuts each side in the frame so they are permanently fixed, so you don't even need to get a socket on them.
@fishfreeordie1244
Жыл бұрын
“I hear it’s difficult” well bruh not when you got the engine out lmao
@josecamacho-ft9xj
2 жыл бұрын
would it be safe using threaded rivets?
@liamredden2275
3 жыл бұрын
What size is the nut on the other side?
@INuisanceI
3 жыл бұрын
Wait why would the coil spring pop out? Don’t you have all your castle nuts on still?
@horsepower9624
3 жыл бұрын
I don't remember but you might be right.but its always good to be safe.
@jorgebiden5035
8 ай бұрын
If this is the easy way I’d hate to know the hard way🤣
@showtime2203
2 жыл бұрын
U all so can drill holes right at the bottom wear the screws go
@b.c4066
2 жыл бұрын
Yep, easiest way. Then just use a box end wrench to hold the nut while you torque new bolts in, same applies to s-10, 2nd gen f body, gbody, and others.
@cj8172
2 жыл бұрын
Sounds like a good idea
@ricardoalvarez8664
3 жыл бұрын
Cool i wana do same wit my 92 Do you have Instagram
@horsepower9624
3 жыл бұрын
No I don't
@rickyvega9788
2 жыл бұрын
Same I'm putting a 5.3 and I been trying to fine some motor mounts that fit my 92
@gchrysanthis4734
3 жыл бұрын
what is the part numbers? please and thank u
@ManuelHernandez-hh4et
3 жыл бұрын
Parts number for?
@electricguysvcs
2 ай бұрын
Why would anyone do a motor mount replacement video when the engine is out?????? That's like saying here's a bag of air, let me show you how to breathe
Пікірлер: 19