Hi would a upside down float in the carb cause the motor to bog down at full throttle?? Like it will go full speed for a good while then jus slow down and go fast for a cpl seconds and go slow again so on so on so on
@kingdeadlego
2 жыл бұрын
Well yes a upside down float might cause a lot of problems. Not even sure if you can put the float upside. If you could do it then sure it might cause that problem due to not enough fuel in bowl. It would run the bowl dry and fill back up. But it could also be other issues too. If float is installed correctly. Does it the rpm just slowly drop down or a sudden drop or little stumble when dropping?
@riverrivers250
2 жыл бұрын
@@kingdeadlego it will just drop…. Like slamming ur brakes on the truck. Then go full throttle for a few seconds….. and the primer bulb gets real soft.
@brassowarizona
2 жыл бұрын
What model and serial number is the motor? Mine is the same engine but I can’t read the sticker to get the information.
@kingdeadlego
2 жыл бұрын
Not sure. I will have to look and see if I have wrote down. I no longer have that engine. Thanks King Deadlego
@andyguy5764
2 жыл бұрын
The silver plug on side of engine should have your numbers on it. 1996 should start with OG******
@cozziwysong3905
3 жыл бұрын
you for got the front jet
@jimmythompson9394
2 жыл бұрын
Lol. My luck. The one thing that I was watching for, you didn't even address. The gasket Or gaskets under the top plate. Is it rubber or gasket material.
@kingdeadlego
2 жыл бұрын
If it is plate that I’m thinking about it want to say it gasket made of gasket material. I do have a 10hp engine I’m going to doing soon so I make a video on that. Thanks
Пікірлер: 11