Glad you didn't run into any major issues! Cool to see it running & driving so quickly
@narunetto
4 жыл бұрын
I know how much this car means to you so its cool as fuck to see that this went incredibly well and now you don't have to deal with the shit autos these things had! This gen of Accords are great and it's awesome to have one in such good condition out there on the road still
@accordinglyryan
4 жыл бұрын
Exactly man! Thanks for the support
@zenturious7743
4 жыл бұрын
So you're that Honda that keeps on driving by at 3:00AM I CANT SLEEP!!!
@accordinglyryan
4 жыл бұрын
This bitch got stock exhaust smh
@luisrentas9715
2 жыл бұрын
Questions did you guys still used the automatic computer ??? And how you did the plug for manual speed sensor ???
@omarzowila
4 жыл бұрын
#savethemanuals
@ediagautomotivetools4478
4 жыл бұрын
Subscribed,Like Honda content.Keep good things
@fetc7283
4 жыл бұрын
Congratulations on finishing the project. Now, to “dispose of” the other 1998 Accord...
@accordinglyryan
4 жыл бұрын
Yep, we'll have to get it to the scrap yard later this week
@fetc7283
4 жыл бұрын
Ryan Gehret I thought you were gonna sell it after putting all the other parts in it, but I obviously thought wrong.
@accordinglyryan
4 жыл бұрын
@@fetc7283 Plans change
@Life_With_Dre
10 ай бұрын
I have a 2002 accord with the f23a1 and what was wondering what all would I need to do this swap besides the trans
@christophermarks5168
5 ай бұрын
By chance do you have any notes on the wiring part of the swap? I'm wanting to do this on my 2000 accord but I'm not too sure on the wiring part.
@pHOneGenIuS2009
4 жыл бұрын
Holy shit you did it! I'll send the video to my dad :-)
@accordinglyryan
4 жыл бұрын
Nice lol
@pHOneGenIuS2009
4 жыл бұрын
@@accordinglyryan he asked if you had problems with the ex-auto car rejecting anything as far as the ecm goes. He figured if you did cluster switch over you'd have abs lights on and such
@accordinglyryan
4 жыл бұрын
@@pHOneGenIuS2009 Nah, we swapped the PCM from the 5 speed car so it's basically none the wiser. The ABS bulb isn't present in my LX instrument cluster so no light to come on lol
@pHOneGenIuS2009
4 жыл бұрын
@@accordinglyryan good going. I was gonna suggest you do that last night but forgot to say that. Now the auto goes in the manual car?
@accordinglyryan
4 жыл бұрын
@@pHOneGenIuS2009 Nah, we're abandoning it as it just isn't worth the effort.
@stevenjames3356
5 ай бұрын
Hey I have a question I hope yall can answer it but I’m in a middle of a build an was wondering instead of splicing on rerouting wires can I just swap a manual harness in ???
@edwingeorge9097
2 жыл бұрын
I like ur video, is very helpful . Please is the automatic transmission drive Axles shaft is the same with manual transmission drive Axles shaft?
@accordinglyryan
2 жыл бұрын
The passenger side is, driver side is different (and you need the intermediate shaft from the manual engine)
@codykamminga9667
4 жыл бұрын
If you can, keep the other engine and other parts for your accord just for spares
@accordinglyryan
4 жыл бұрын
I'd like to but don't really have a good place to store them unfortunately
@JWaynesWorld
2 жыл бұрын
What wire did you have to hook up for the clutch how did you hook that up I need some information that's the only thing I'm lacking right now
@accordinglyryan
2 жыл бұрын
I honestly can't tell you from memory but it's under the driver side of the dash. Find a service manual online, it's really simple. Just gotta cut a wire, ground one side to chassis, and run it through the interlock switch on the clutch bracket. All it does is interrupt the starter.
@CompressionFreak
9 ай бұрын
How did you get that information because I can’t find anything like that on the internet and it’s the final part of my swap but I can’t get my car to crank over it just clicks
@TheOnly_KRYP71C
3 жыл бұрын
2 questions for ya, 1. Where did you pick up your headlights? 2. Where did you get your trunk spoiler?
@accordinglyryan
3 жыл бұрын
Both from eBay lol. The spoiler is the SpoilerKing 301G
@cesarcpx386
3 жыл бұрын
Can u share how did you do with the wiring for the speed and the reverse sensor please
@jorgeroman7227
2 жыл бұрын
I want to know to
@danielrodriguez9644
Жыл бұрын
I would like that
@vinnybeedle1728
2 жыл бұрын
What did you guys do for the clutch pedal top bolt? Am in the middle of my own swap on an 02 4 spd SE and am pretty much at this stage.
@vinnybeedle1728
2 жыл бұрын
Also what did you write the clutch interlock switch to? I’m guessing something in line with the ignition circuit; I know of two thick gauge wires I’m supposed to splice together thinking of splicing the clutch switch in line with those
@carsandtrucks4life818
2 ай бұрын
Why didn’t you just take the brake pedal out of the original one with the manual transmission?
@accordinglyryan
2 ай бұрын
We did a couple weeks later lol
@ayt4091
Жыл бұрын
Can u explain how to wire up the speedometer
@Honja999
3 жыл бұрын
Wait I seen this accord in my dreams lmao
@gottaluvaneyy
Жыл бұрын
Dose anyone know witch wire needs to be grounded I'm in the middle of doing this swap and I can't find the wire that would bypass the clutch switch
@exit9mastertec7
3 жыл бұрын
Question if the white anf blue wire from the auto wire harness connected to the vss and also yellow for cluster signal and black wire grounded why wouldnt it function it would have been great if they actually seen tje wires you solder as a cross reference
@accordinglyryan
3 жыл бұрын
I didn't get much into it because my friend did all the work, and I still don't fully understand/remember what he did lol. I am a complete retard when it comes to electrical stuff. You should be able to find the info on the 6th gen accord forums tho
@joshuarodriguez4972
11 ай бұрын
I been strugling for 2 weeks looking for scematics to connect my VSS and CLUTCH INTERLOCK. Can you help me out to figure that?
@accordinglyryan
11 ай бұрын
Not really...I didn't take notes and it was 3 years ago. All we did was cross reference the service manual and repin like 3 wires
@joshuarodriguez4972
11 ай бұрын
@@accordinglyryan thank you found a diagram that shows a blue and white to ground out. Just gotta find the correct wire
@accordinglyryan
11 ай бұрын
@@joshuarodriguez4972 Yeah that sounds right, just connect the blue and white wire to the clutch switch and ground the other side out
@jonathanmonger111
4 жыл бұрын
Great
@ayt4091
Жыл бұрын
Can’t u explain how to wire the speed sensor
@Freddy24214
9 ай бұрын
Did you have any problems with the vtec
@accordinglyryan
8 ай бұрын
Nope, wire up the speedometer and you're good to go
@GurwinderSingh-xk5fb
Жыл бұрын
Hey buddy, great videos. Could you please explain VSS wiring a little better please.?? I would really appreciate.
@accordinglyryan
Жыл бұрын
I didn't take too many notes unfortunately and it's now been 3 years, but we essentially referenced the EWDs in the service manual to repin the VSS signal wire to where it needs to be, and reused some leftover wires from the old automatic trans harness for power and ground.
@tonyrosa6094
2 жыл бұрын
So you used the ecu from the manual?
@accordinglyryan
2 жыл бұрын
Yes, you have to or else it won't run right
@corykemeys9596
2 жыл бұрын
How did you go about fixing the issue with temp gage my I have an 2000 Accord lx manual love it I'm in the midst of fixing all the little minor things and would appreciate any advice
@accordinglyryan
2 жыл бұрын
I just bought ScanGauge lol. But you can buy a used cluster and swap out the fuel/temp gauge "pod." It comes out separate from the tach and speedo gauges. I wish I had known that beforehand on mine
@jeffcontreras8517
Жыл бұрын
Is it a V6 Honda Accord with a stick shift?
@codykikendall6015
4 жыл бұрын
So you did swap out the auto ECU for the manual one? And that is why you need both keys together to start the car?
@accordinglyryan
4 жыл бұрын
Correct, it won't run right unless you have the 5 speed PCM
@og_muddi5587
3 жыл бұрын
I plan on pulling all the needed parts from a junked car at the scrapyard, what do I do if I do not have the key from the donor car ?
@accordinglyryan
3 жыл бұрын
You need an ECU with a matching key. You can tow it to a dealer and have them reprogram it, but that's a pain for obvious reasons
@bigdharls3743
2 жыл бұрын
What pin did you swap or place it in
@accordinglyryan
2 жыл бұрын
For the VSS? The pins you're working with are A9 and C23 I believe. Find a service manual online, that'll clear it up more, I don't remember all the specifics anymore because its been too long/I didn't do the wiring
@Tamay.
4 жыл бұрын
Hey, i have a question that litterally has nothing to do with cars. Would you recommend me to buy a Dell Latitude D610 so can you say if its good? I wanna buy one from ebay and it has Windows 2000 but would you recommend me to buy it? I do not know much about laptops.
@accordinglyryan
4 жыл бұрын
It's literally good for nothing but a display piece/collectors purposes lol
@shugg0517
Жыл бұрын
Ryan this is Tony again. Far as getting the car started. #1 Did you get the (new)key reprogrammed to the VIN of the donor car. #2 Did you get the computer reprogramed along with the Immoblizer
@accordinglyryan
Жыл бұрын
Eventually yeah, in the meantime we held the paired key to the ignition cylinder while starting
@shugg0517
Жыл бұрын
So just get the (new) key reprogramed to the donor car. And get the same ( new) key cut to the original ignition. So that the ignition cylinder can move like the original key did. The gray key that y'all put a hole into. Ok got it. No programming of the ecu only program the key to match the ecu signal. And the immobilizer is the go between to verify both signal from the ecu and the key. Correct!!
@accordinglyryan
Жыл бұрын
@@shugg0517Pretty much yeah. You want the original key to your car programmed to the ECU you swapped in. We destroyed the gray key's immobilizer so the other one would transmit its signal, so we could drive it to the dealership.
@shugg0517
Жыл бұрын
@@accordinglyryan Cool thanks for your help . Will give y'all a update when I get it done.
@xmetrix
4 жыл бұрын
the question is... will you park it in neutral , or in gear like you should?
@accordinglyryan
4 жыл бұрын
I've always parked my manual cars in neutral with the ebrake, unless I'm on a hill. I see no point in putting it in gear on flat ground.
@CompressionFreak
9 ай бұрын
Why didn’t you guys show what wires are need for the clutch interlock because that information isn’t readily available
@accordinglyryan
8 ай бұрын
Well, this really isn't a step by step tutorial. My friend did most of the wiring work so I didn't really have too much involvement with that
@CompressionFreak
8 ай бұрын
@@accordinglyryan gotcha I figured it out and will be posting a video soon
@blanco_z3455
7 ай бұрын
@@CompressionFreak i would like to see a vid on that
@glockzz3863
3 ай бұрын
@@CompressionFreakdid you get a video of it I’m currently doing the swap right now. I’m only caught up on the wiring aspect
@CompressionFreak
3 ай бұрын
I haven’t had the time but I will say for the time being the big transmission plug has two wires you need; it’s either blue or gray I think I referenced my helms manual to get it
@grimreaperleeperaccordsupe8584
Жыл бұрын
you guys never swapped the motor hardness from the manual car to the automatic one right ? ya just left the hardness in the cars
@lawrencerenfro6290
Жыл бұрын
Could you have just used the wire harness from the manual donor car?
@accordinglyryan
Жыл бұрын
That would have been a lot more work than repinning 3 wires lol
@yarimarcamacho1464
3 жыл бұрын
What trasmisión did You buy
@julioequinonesmoll8029
2 жыл бұрын
Please can u send me pics of how to wired vss my speedo dont work and vtech either please
@DJCapsalot
3 жыл бұрын
i have an 01 accord did everything but need to wire up vss how did you do that cant find anything on the web about that
@accordinglyryan
3 жыл бұрын
This is what I can offer you: docs.google.com/document/d/1EwQi_FC7Av8z0qSUC77IsuNs95m_C07jvZyo4gD64ms/edit?usp=sharing
@jaarondavis7426
2 жыл бұрын
Does anyone have any information on swapping the ecu? I’ve seen information about having to mess with the wires afterwards so I’m just looking for some clarity…
@luhwild9284
10 ай бұрын
lmk if you found out
@silverknight532
4 жыл бұрын
Why are you making it manual
@accordinglyryan
4 жыл бұрын
The autos in these are kinda junk, and manual is more fun
@zenturious7743
4 жыл бұрын
@@accordinglyryan this dude just asked why lmao
@PrimateSoul
2 жыл бұрын
Because the autos are lemons
@exit9mastertec7
3 жыл бұрын
Whats the wire for vss
@zachharper2664
Жыл бұрын
What year was the donor car? You got the parts I got 2002 I want put a 5speed in but my other car 1998 would that matter?
@accordinglyryan
Жыл бұрын
Same, 1998. 01-02 has a slightly different engine, the ECU may not like it. I'd try to find a 98-00.
@zachharper2664
Жыл бұрын
@@accordinglyryan would it matter if you took the motor and everything out of the 98 put it in 2002 would it work ? Or no to much work
@accordinglyryan
Жыл бұрын
@@zachharper2664 I think the difference is the 2002 uses a different style of oxygen sensor, so that wouldn't work with the engine harness. I'm not 100% on that but like I said, you're better off trying to find a 98-00.
@zachharper2664
Жыл бұрын
@@accordinglyryan I really appreciate the help
@accordinglyryan
Жыл бұрын
@@zachharper2664 No prob good luck
@Number1Juan
4 жыл бұрын
Yeeeeeeeeeeeeeeeeeet
@bbmwe30m3
2 жыл бұрын
Did you change the ecu to manual or does this work with an automatic ecu?
@accordinglyryan
2 жыл бұрын
ECU has to be changed, won't run right without it
@jaysonramos1380
Жыл бұрын
@@accordinglyryan i can confirm it dont run right
@jonathancornejo1790
2 жыл бұрын
Pretty late but can you or could show what wires you shrink together for the speedometer to work i understand how to remove it but which 2 to combine and where it should go
@accordinglyryan
2 жыл бұрын
If I remember correctly (which is not a guarantee lol) you need to repin wire A9 to C23 at the ECU inside the car, and tee off that to drive the speedometer in the cluster. We repurposed a couple wires for the old AT to be our signal and ground wires
@jonathancornejo1790
2 жыл бұрын
@@accordinglyryan so if those are correct your saying C23 no longer need? Replace with A9? Tee off to drive the speedometer in the cluster? Would you happen to have any pictures? If you had a chance to get them?
@accordinglyryan
2 жыл бұрын
@@jonathancornejo1790 I believe so yes. The wire that you tee off is gonna go to the speed sensor for the input signal. We repurposed one of the old wires that went to the automatic transmission for this. We didn't document anything besides what's in the video unfortunately, and it's been 2 years so my memory is probably a fit fuzzy. Plus I didn't actually do any of the wiring work lol
@jonathancornejo1790
2 жыл бұрын
@@accordinglyryan would you think if i get the whole ecu and the harness of a 1998 manual accord and swapped with my old one it would all work by plug and play and not do any modifications on the wires?
@accordinglyryan
2 жыл бұрын
@@jonathancornejo1790 That's a whole lot more work than splicing 3 wires together lol
@cesarcpx386
4 жыл бұрын
Please! I need more information for the neutral safety switch, my Accord do not start What do i have to do?
@accordinglyryan
4 жыл бұрын
You have to complete the circuit for the range selector. We rewired it to the clutch interlock under the dash
@cesarcpx386
3 жыл бұрын
@@Hachiro really thank’s
@sk8toughrooster411
Жыл бұрын
Did you ever find a solution I’m stuck on this currently 🤦🏻♂️
@shugg0517
Жыл бұрын
What forums did you use to get the info to do the swap ?
@accordinglyryan
Жыл бұрын
Couple different ones, Honda-Tech.com, DriveAccord, 6thgenaccord.com, etc. Most of the information is out there for free. I would also recommend buying a PDF of the service manual, really helps with torque specs, cross referencing the wiring, etc
@shugg0517
Жыл бұрын
@@accordinglyryan ok thanks for all your help
@accordinglyryan
Жыл бұрын
@@shugg0517 No problem good luck!
@roobeltran1270
2 жыл бұрын
Man how much did u spent approximately?? I wanna do that exact same swap to my 99 accord
@accordinglyryan
2 жыл бұрын
$2500 ish including the donor car
@Freddy24214
10 ай бұрын
@@accordinglyryanprice for just labor
@accordinglyryan
10 ай бұрын
@@Freddy24214 No idea, I didn't pay someone else to do it
@Goyito81
Жыл бұрын
Donyou have the diagram for the wiring i need it all asap.
@accordinglyryan
Жыл бұрын
Nope sorry
@Goyito81
Жыл бұрын
@@accordinglyryan which ecu did you use?
@accordinglyryan
Жыл бұрын
@@Goyito81 The manual one, won't run right without it
@Goyito81
Жыл бұрын
@@accordinglyryan thanx i have it just need to drill the hole put in the pedals n get working on the wiring.
@accordinglyryan
Жыл бұрын
@@Goyito81 It's not too bad, you can find the service manual online. There's only like 3 wiring changes you need to make
Пікірлер: 135