Aside from cooling hoses, the crank pulley on our JZs should be one of the first things to replace before you hoon around. There have also been cases of failure while idling
Timing cover does not have to come off, I just took care of the timing belt while I was there and I'll upload that video soon
Crank pulley torque specs from what I've seen online seem to range from 240-250ft/lbs but if you have the Fluidampr, if I remember correctly they had the spec rating in their instruction manual.
Can you reuse your crank pulley bolt? Yes. Experience may vary but I've yet to hear about any ill effects with reusing the bolt. Should you? No. Crank pulley bolts are designed to stretch when fitted. Considering how cheap they are, you should use a new 1JZ/2JZ Crank Pulley bolt.
________________________________________
Parts:
~Fluidampr Crank Pulley Part Number : 840801
I bought mine from JEGs with no issues
~ Idler Pulley (also called belt tensioner depending where you're buying):
OEM: 16620-0W016 (IS300 NA 2jz are the same)
Aftermarket: 0187-GX115
________________________________________
Tools:
~ 22mm weighted socket
________________________________________
~Never expected, but if you'd like to tip a dollar~
Venmo: @Kenny-Dang-22
Cashapp: $kdang22
Paypal: www.paypal.com/donate/?hosted...
@0:00 Intro
@0:53 Remove hydro fan and radiator
@2:42 Remove accessory belt
@3:00 Remove crank pulley
@4:56 Install new pulley
@5:35 Replace idler pulley
@6:06 Install accessory belt
@6:28 Reinstall radiator, fan and replenish fluids
Thanks for watching 👍
Негізгі бет Автокөліктер мен көлік құралдары 1JZ/2JZ Crank Pulley DIY (EASY) |JZX90|JZX100|IS300|SC300
Пікірлер: 16