Spent hundreds of dollars at a shop trying to get my horn fixed, they replaced the clock spring and it made no difference. After seeing your video I ran a grounding wire from the white wire to that screw and voila, my horn is fixed. Many thanks
@lonewolfgamer81
5 ай бұрын
Just wanted to thank you for the video, my 2000 Tundra has been hornless for about a year now, only working when it wanted to. 10 minutes and it's back alive thanks to your video!
@HarshRealityNewsletter
2 ай бұрын
On the 05 to 07 its the black wore. If you tap the black and white wore you'll get a flickering cruise control light. Other than that this works. 🍻
@kpkratz
3 ай бұрын
Worked great! 2003 Tundra SR5. I pulled the harness out and tested by jumping the pins directly. The color of my wires are different than yours.
@gavinwinks5953
Ай бұрын
I can’t believe this worked for me. I did it exactly how you did it and it worked. What’s the concept behind this?
@dirtymikesgarage9053
Ай бұрын
@@gavinwinks5953 often the ground circuit in the column for the horn goes bad. The cruise control uses a separate ground. So by taping into the cruise control ground you fix the horn. And both circuits do t have any serious current going threw them so it’s no big deal.
@Bassrvr_Cape_Cod
3 ай бұрын
Worked like a charm……wish I had not invested in new clockspring
@shanemilehi
2 ай бұрын
My tundra horn was intermittent but it’s been not working at all for a long time. Could this still work?
@bradybrown6080
Жыл бұрын
Which of those two wires coming off the cruise control are you supposed to tap into?
@justathought1888
7 ай бұрын
Hey. Friend. I just saw this video and was wondering if you found out which wire to tap into or both ? I'm having the same issue with my 2009 Sequoia.
@purdyboi8078
Ай бұрын
The white wire
@ryanlogan2911
Ай бұрын
I have an 03 Tacoma with the same steering wheel. The horn beeps at erratic times. I can’t find where the circuit is grounding out? Clockspring?
@ryankupferschmid6812
2 ай бұрын
What did you do for the paint job on your sequoia?
@jtarin10
Жыл бұрын
I’ve been looking for this fix for a while. Are there only 2 wires coming from the cruise control? Tap into the white one? Thanks!
@justathought1888
7 ай бұрын
Hey, friend. Did you find out which wire to tap into or both ? I'm having the same issue with my 2009 Sequoia. Thanks
@purdyboi8078
Ай бұрын
@@justathought1888 It's the white wire
@purdyboi8078
Ай бұрын
Yes, white wire
@bstunstill
3 ай бұрын
My 2000 tundra is different. From right to left in the white plug is red, white, red and the white with black stripe. The first red goes directly to the horn switch. The other 3 go to the cruise switch. Do I still tap into the white and black wire?
@evidenceofaliens6991
3 ай бұрын
when removing the steering wheel bolts did you use T-30 or T-25? im having trouble removing it
@ryanpierson6121
28 күн бұрын
Any idea what gauge those wires are?
@dirtymikesgarage9053
27 күн бұрын
@@ryanpierson6121 they are pretty small. Maybe a 16g
@justathought1888
7 ай бұрын
Does it matter which wire you tap into ? Thanks
@kitcarsonsghost5845
6 ай бұрын
Just did it, it's the white wire in the group. It has little gray lines on it. Just tapped in, soldered and connected to the screw he did and so far it works great. The cruise control light works fine.
@justathought1888
6 ай бұрын
@@kitcarsonsghost5845 Thanks
@purdyboi8078
Ай бұрын
Yes, just the white wire!
@svendouglas8299
7 ай бұрын
I did it, and it left my cruise light on. Don't know what went wrong, but i did it exa tly as explained there.
@justathought1888
7 ай бұрын
Which wire did you tap into, and did you reverse it after your cruise light came on ?
Пікірлер: 28