A short video about how to Zero your 1Zpresso JX-Pro grinder.
Some people say that when they first get their 1Zpresso grinder that it’s not at zero. Some say that the burrs are fully closed, but the number is not at the zero, it’s sometimes at other numbers, like 9 or another number.
This is the way that I Zero my grinder and it usually gets me perfectly back to zero.
NOTE: If you are still a little out and don't get to zero when you use this method, you can loosen the adjustment dial a little (about two full rotations is enough) and turn the burr shaft slightly left or right, as long as the flat edge of the burr shaft is on the left of the big O pointing up, you are in the right place.
If your number is 9 or less, then slightly turn the burr shaft to the right, if the number is past 0 at 1 or more, slightly turn the burr shaft to the left.
/ 1zpressometacoffee
Негізгі бет 1Zpresso JX-Pro how to Zero your grinder.
Пікірлер: 125