Great Info! I'm here to discover if the full can of CRC 2-26, I still have on my tool shelf will be perfect for spraying onto the foam rubber tip (including a protruding copper wire) of my DIY Stylus *Capacitor* *Pens* i build from time to time. Was very interesting to also see how wD40 can actually explode a balloon in 30 minutes. No wonder Sex is not allowed at Rubber Latex *Fetish* *Balls* here in L.A.
@sparkywirenut
2 жыл бұрын
I've been using it on my hunting rifles for years , works excellent in low temps , bolt operates smoothly in below zero temps !
@Hubjeep
6 жыл бұрын
Thanks. Somehow I ended up with a couple cans of this. Can it be used in place of a di-electric grease when installing 12v bulbs or making automotive connections?
@crcindustrial
6 жыл бұрын
2-26 can be used for that type of application. It will not last as long as dielectric grease.
@timserious7678
4 жыл бұрын
Does crc 2-26 leave oily residue after drying out, if not wiped ??
@potugadu5160
4 жыл бұрын
Hi, I have a few questions about this product: - Will CRC 2-26 clean or lossen the rust (or oxidation) on electrical contacts? - Can CRC 2-26 be used to clean & protect USB ports of my laptop and smartphone? - How is CRC 2-26 different from CRC QD? - Can I use CRC 2-26 instead of CRC QD? CRC 2-26 is 3-4 times cheaper than CRC QD in my country. - How should I prep the parts before applying CRC 2-26 on them? Thanks.
@crcindustrial
4 жыл бұрын
Will CRC 2-26 clean or lossen the rust (or oxidation) on electrical contacts? - Yes this product can help, in most cases you will need to use an abrasive pad for cleaning. Can CRC 2-26 be used to clean & protect USB ports of my laptop and smartphone? - I do not recommend this for these applications. USB can be cleaned out with an aerosol duster same with smartphones. I would be worried about the product getting past the port and liquid getting trapped under the phone screen. How is CRC 2-26 different from CRC QD? - 2-26 is a multipurpose lubricate, penetrate, water displacer, and short term corrosion inhibitor. It will leave a thin oily film behind. QD is a fast drying contact cleaner that does not leave a residue behind. Can I use CRC 2-26 instead of CRC QD? CRC 2-26 is 3-4 times cheaper than CRC QD in my country. - They are 2 different products to be used pending the application. There are times will QD will need to be applied first for more cleaning, then followed up with 2-26 How should I prep the parts before applying CRC 2-26 on them? 2-26 can be applied right to an area, but for heavier dirt and such on a component cleaning with QD or other means of cleaning may have to take place first.
@potugadu5160
4 жыл бұрын
@@crcindustrial Thanks for the reply. "in most cases you will need to use an abrasive pad for cleaning." I assume the abrasive has to be used before applying CRC 2-26, because if used after, it will remove the protective film left behind by CRC 2-26, right? Or if the abrasive is used after, then CRC 2-26 has to applied again to restore the protective film, right? "I do not recommend this for these applications" Since CRC QD dries off quickly and doesn't leave any residue behind, can it be used on USB ports of phones & laptops, instead? Looks like the only extra benefit CRC 2-26 provides, compared to CRC QD, is the protective oily film, and, in fact, looks like CRC QD is better suited for my needs -just that I may have to apply CRC QD periodically because of the absence of the protective film. Thanks.
@stevemcmechan6444
Жыл бұрын
@crcindustrial is this product essentially now the same product but called crc 556 electrical?
@themoodyvlogger
6 жыл бұрын
Can we use it to clean and lube chains??
@crcindustrial
6 жыл бұрын
Yes this product will clean, penetrate, and lube chains. We do offer specific chain lubricants for heavier duty, and load applications.
@stevemcmechan6444
Жыл бұрын
@@crcindustrial is this product essentially now the same product but called crc 556 electrical?
Пікірлер: 12