Hi, What is the torque spec for the auto tensioner bolts? 8m hex and 12m bolt? Thank you
@Usmanthemecano
2 жыл бұрын
Great video! Could you please share your camera and lighting setup? It would really be instrumental
@raincitywrench117
2 жыл бұрын
Thank you. Using a ordro ep7 head wearable camera + black diamond sprinter 200 headlight for this video. Use sony hdr-cx675 handycam + sony shoe mount hvl-leir1light on all other non first person videos. Oh yea, epidemic sound subscription
@Usmanthemecano
2 жыл бұрын
@@raincitywrench117 thanks a ton. I'll check it out
@fernandovargas7562
2 жыл бұрын
Cool video
@vicrmz93
Жыл бұрын
Awesome 👍
@musicmonkey2
7 ай бұрын
What was in the can you used to clean the motor.
@raincitywrench117
7 ай бұрын
It's the shops bulk parts cleaner.
@danjones3402
Жыл бұрын
My 2.4 engine Accord car is making a noise when I turn on the AC and I noticed that the water pump shakes a lot when I turn the AC on. My mechanic thought it was the pulley tensioner bearing but the noise is still there. That bearing was bad but wasn't the main cause of the noise. Days after I noticed the water pump would shake so I have a feeling it's the pump. 160k on the car now so I feel it's best to just replace it regardless as part of the maintenance.
@raincitywrench117
Жыл бұрын
If the pulley has any lateral play then the pump is bad. With the engine off, LOL, grab the pulley and see if you can move it side to side or take a screwdriver or prybar and push on it to see how much movement you get or take the belt off and spin the pulley to see if it's noisy.
@danjones3402
Жыл бұрын
@@raincitywrench117 Will do thanks for the response!
@mandingo1125
2 ай бұрын
What vacuum gauge did you use to fill the radiator. Thanks
@raincitywrench117
2 ай бұрын
I use an Airlift. Excellent tool. www.amazon.com/UView-550000-Airlift-Cooling-Checker/dp/B0002SRH5G/ref=sr_1_1_mod_primary_new?dib=eyJ2IjoiMSJ9.Dz0SYrighrFMVKfR_xgUKVkgWc0dCU1Gj0BdtTSevf9fb9wfnkW7RKYhiKjNML6ncozoJTfX4CgOlkK5TsAk2HuzeOR7qkEupbd6r7KuzbjMSBRE9lbdvLZLqaQlWe4XORoyDMMgDMtvprjOo_v_s-Aa1XcDZ_1qS-u4ylcvQlix0NjbkW4zt7TxsE6HzPJrn0lL8thZQ4NgL4oUj0i1uo8IKSaAfB_aDJdD5GW54gwrPFN0M2epSK3JXWRwYCG557-7yrAFSCi2SCFplFM_Wk28S44oWHY0ywLEC0b8L10.eezexiP9Gy0aVBgK_SXoAl2Fkr3FhEoTR6GQatHwdiE&dib_tag=se&hvadid=650386075128&hvdev=c&hvlocphy=9033389&hvnetw=g&hvqmt=e&hvrand=4632214839969262111&hvtargid=kwd-135231230653&hydadcr=7501_13278800&keywords=airlift+coolant+refill+tool&qid=1716873466&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=8-1
@Bill-ts9zv
2 жыл бұрын
I was just talking about the location of the water pump and all the crap needing removed before you could get to it.
@raincitywrench117
2 жыл бұрын
Oh, got it. That's pretty much everything anymore. Seems like you always have to remove a bunch of stuff to get at what needs replaced.
@ALL_CAPS_
Жыл бұрын
Could be worse and having to do timing belt while you're at it
@lenbata
11 күн бұрын
Gg after market parts
@awaisahmed7909
3 ай бұрын
Can you please tell me where you ordered this part from?
@raincitywrench117
2 ай бұрын
Oreillys www.oreillyauto.com/search?q=cp6740
@awaisahmed7909
2 ай бұрын
@@raincitywrench117 Thank you!
@danjones3402
Жыл бұрын
how long did it take you?
@raincitywrench117
Жыл бұрын
It's about three hours from start to finish including filling cooling system, warming up engine and checking for leaks.
@daveyvega7348
Жыл бұрын
@raincitywrench117 pro demands call for 1.8hr.. no way in hell will be 1.8hr..Im doing it right now, and I didnt see your video, and Im doing it same way.. that pump it's stupid LOL.. Good video tho
@Kan3_MANE
Ай бұрын
I mean cool music, but like imagine how many more subs/views you’d get if you spoke. (What your grabbing, what probs you ran into, lil tips, etc)
@raincitywrench117
Ай бұрын
You're not the first to mention this 🙂👍 All my newer videos are that exact format.
@MrSamiam2310
6 ай бұрын
You don't explain nothing.
@jjgag601
2 жыл бұрын
Having just done a head gasket and the water pump on that engine it was nice to see a professional put those bolts back into the water pump after you replaced it. They were a real pain. I liked your flexible magnet that seemed to work good. I also liked your gear wrench set up for the fan belt. I had to use a 14mm closed on the idler arm and then a 1/2 breaker bar in the open end to give myself enough leverage to get the belt back on. Nice job. I do enjoy you talking us through the project instead of the music, but i understand you are getting paid to work not entertain us.
@raincitywrench117
2 жыл бұрын
Have a few tensioner tools but the gear wrench works the best. Way back when I used to use two end wrenches to collapse those style of tensioners. The flexible magnet has saved my bacon many times. It's definitely a juggling act on my videos. I try to film as many as I can & not have to use music, I know the majority of viewers don't like it but if music is playing in the background when filming, KZitem flags me and demonetizes the video. Will probably be doing more videos with voice over narration in the future. Thanks for watching!
@xxrodneyxx
2 жыл бұрын
How many miles?
@raincitywrench117
2 жыл бұрын
114k
@starkeymorgan4142
2 жыл бұрын
Uggh. My 2012 crv is at 112. All systems go. I think I'm gonna wait till that thing makes some noise before I replace it. Had a 1986 accord squeak for a solid year at first startup in the morning. Didn't think much of it untill I was traveling from Memphis to St Louis and coolant exploded all over engine and windshield at 80 mph. Damn near wrecked it and just pulled over into the median. Walked a couple miles (no cell phones) and found a mechanic who replaced it for $80..this was 1997. Good to go. When it squeaks, replace it..don't be like me. An amazing vehicle.
@raincitywrench117
2 жыл бұрын
@@starkeymorgan4142 Wow, what a story. The best preventative maintenance is to drain and fill the cooling system every 5 years or so. When the silicates break down it takes the water pump seal and bearing out. My Yukon made it 135k before it started a random squeak from the engine. My gut was the water pump so replaced it a few months back and the noise has never returned.
@Bill-ts9zv
2 жыл бұрын
What a terrible place to work
@raincitywrench117
2 жыл бұрын
Dark, dingy, loud. Horrible! Nah, I definitely know how goo I got it. Pretty much the best possible conditions a tech can have.
@boxerfan2
2 жыл бұрын
@@raincitywrench117 Yeah it could be worse like phoenix az in the summer working in bays with limited shade.
@raincitywrench117
2 жыл бұрын
@@boxerfan2 That would be brutal especially working at a quick lube place.
Пікірлер: 37