Good vid, when installing on a 4th gen the lower control arm didn't hang like that, in fact it was a bear to push down to get the strut in place.
@McHeebler
Жыл бұрын
Great vid 😎💪
@et3261999
Жыл бұрын
Just the video I need. 👍🏻
@XtremeTruckAuto
Жыл бұрын
Good to hear! If you have any questions let me know.
@et3261999
Жыл бұрын
@@XtremeTruckAuto how does it ride?
@XtremeTruckAuto
Жыл бұрын
@@et3261999 In my opinion, it was like factory but I only got to drive it for a few miles.
@McLaughlinWorx
6 ай бұрын
Can you send a link for the ready lift differential spacers?
@XtremeTruckAuto
6 ай бұрын
www.readylift.com/tacoma-differential-drop-kit-1.html This will work on a 4 runner, Tacoma, FJ . SKU 47-5004 is the part number they are currently showing out of stock. You can find this kit from other distributors online.
@dariomonteagudogandulla3833
Жыл бұрын
Greetings, I already installed them in a 2w SR5, they were perfect, very even and the vehicle looks good, level, only I need more weight in the front part, even rough country technicians had recommended it to me, like a bumper and a winch to add weight, so if it remains 100 percent in operation, when I install it I will tell you what the experience is like
@crackinbridge4351
Жыл бұрын
Nice vid! What's the torque specs on that lower control arm bolt? Seeing a lot of different specs online.
@XtremeTruckAuto
Жыл бұрын
trail4runner.com/2020/06/17/5th-gen-4runner-torque-specs/ Here is a cool website that has a bunch of torque specs for most of the bolt on the 4Runner. The lower ball joint bolts are torqued to 118 ft/lbs.
@76erGrant
Жыл бұрын
Have I heard you call this a leveling kit?
@XtremeTruckAuto
Жыл бұрын
A level kit is when only the front gets lifted to match the back. This is a 2 inch lift. So, both front and rear get lifted 2 inches.
@76erGrant
Жыл бұрын
@@XtremeTruckAuto Ah, gotcha.
@davemcdonald7459
7 ай бұрын
Great video. For a variety of health and age reasons, I don’t have the ability to do this myself. How much would this install cost if I took my 4runner to a local 4x4 shop?
@dariomonteagudogandulla3833
Жыл бұрын
Greetings, your 4 runner is 2w or 4w, I have a 2019 runner but 2 w, in many places they say that this suspension 76631 from rought country can be installed, but others not that only 4x4, the issue is confusing, only the explanation they give is for him weight of the engine, there are also others who think that with a bumper on a 2w they would work perfectly due to the weight it adds to the front. Good update, there are always negative comments about rough country but they lack specific foundations, the only thing they talk about is It's cheap and it doesn't work well, but there are no reasons to explain how bad it could be. For me, all those critical comments without proof of its operation are lacking. Regards..
@XtremeTruckAuto
Жыл бұрын
The customers 4 Runner was 4wd. I'm guessing the reason why RC says it won't work with the 2wd is due to it being lighter without the front diff, and transfer case, and associated parts. This causes the 2wd to have a different spring/spring rate than the 4wd. So, putting the RC lifted strut on a 2wd will cause it to lift too high in the front making it sit noes high and also it would change the way it would ride. SO adding a bumper and a winch could help with that problem. Before you go and buy them I would do a bit more searching on the internet. I will be honest rough country got a bad name from the past and they have stepped up their game. They are a good budget lift company. I have installed 100s of their kits with zero issues or at least no more than any other big name lift company. I have their 4 inch long arm kit on my jeep. And I am currently working on an update video on that. Thanks watching and for the comment.
@dariomonteagudogandulla3833
Жыл бұрын
Greetings, I already installed them in a 2w SR5, they were perfect, very even and the vehicle looks good, level, only I need more weight in the front part, even rough country technicians had recommended it to me, like a bumper and a winch to add weight, so if it remains 100 percent in operation, when I install it I will tell you what the experience is like
@XtremeTruckAuto
Жыл бұрын
@@dariomonteagudogandulla3833 Awesome! Can't wait to hear about it.
@dariomonteagudogandulla3833
Жыл бұрын
greetings brother, this saturday i installed the bumper with the winch of approximately 160 pounds or more, it drives well, it seems to me that over time i mean it can get softer and softer as i am noticing it as i use the vehicle tell me your opinion. ..... the bumper is rough country with led bar and the winch is a 13500 pound XBull, let me see if I can send you some pictures so you can see....
Пікірлер: 20