Years ago I made a Moxon for 10m out of wire wrapped round spreaders made from long garden canes. One of the old timers told me to use shirt buttons as insulators, so I did and there was a massive flashover and they melted. In his days I think shirt buttons were made from real mother of pearl not plastic!
@m7trsradio
8 ай бұрын
G'day Simon. Great build I've looked into building one of these ages ago never did it though. Nice work 🤙🏽 happy new year 73
@MikeN2MAK
9 ай бұрын
Nice build. BNC binding posts are awesome for antennas and experimenting. To take the weight load off the BNC on the 705, you might be able to use some zip ties going through the holes on the BNC binding post to attach it to a dowel or something else and then use a short run of coax to the 705.Just a thought.
@richiec7602
8 ай бұрын
Hey, Simon. Love your crazy antenna builds. Just wondering, can you build one out of a rain umbrella? If anyone can do it, you can.
@pixeluser175
4 ай бұрын
You could have told them you were on low power too. Nice job!
@thehamjazz
4 ай бұрын
Thanks so much mate - it was a totally fun antenna to build and only took minutes. Happy building my friend. Cheers 👍
@W4TRI
9 ай бұрын
Great but I'm going to spend the extra fiver for the coax.
@thehamjazz
9 ай бұрын
Haha great idea mate - I’ll do the same but it was sure a fun project to see if it would work! Thanks for swinging by buddy! Cheers
@David-km8in
9 ай бұрын
Hi Simon, Another great idea. Thanks, very interesting. I use a Moonraker whizz loop for FT8 on forty meters. But I do have rf issues, were interference is getting into my phone, which I use for decoding and transmitting the digital mode. All the best David M0DUU
@Tommy_Boy.
8 ай бұрын
Love the 2-meter Moxon Simon! Nice one! I'll have to give that one a go some time! Simple and looks like a real nice performer. 👍📻⚡Cheers! Tom
@stevea3498
8 ай бұрын
Lots of fun buddy!! VE1SK
@franciscolopez3229
4 ай бұрын
Neat. How many watts were you transmitting sir?
@thehamjazz
4 ай бұрын
Hey mate, I was running 5 watts. Cheers mate and happy building
@richard-fy2mu
5 ай бұрын
What is the US AWG of your wire? I get different cal for the long elements of 275/8 Why?
@thehamjazz
5 ай бұрын
Hey Richard, the wire I am using is fencing wire - so I am thinking about an 8 gauge. So as for dimensions.... It would be an 1/8 or smaller of an inch. It is the common fencing wire you buy from Home Depot. Hope this helps mate. Happy building! Cheers
@morecambeanglersandtrawler1074
9 ай бұрын
Put it on a fowl and aim it
@morecambeanglersandtrawler1074
9 ай бұрын
Dowl
@thehamjazz
9 ай бұрын
G'day buddy! Wooohooo thanks as always for swinging by mate. Thanks for the comment about the dowel.... I updated the title and description to say "no coax" doh! I forgot to add it hahaha. Cheers and beers buddy.
@morecambeanglersandtrawler1074
9 ай бұрын
@@thehamjazz have you seen this Simon you like your kzitem.info/news/bejne/ua6A1X-kp5qcg6Qsi=QTZ_jSuAQX1tzU7a
@morecambeanglersandtrawler1074
9 ай бұрын
@@thehamjazz rm noise app looks awesome ai noise canceller
@morecambeanglersandtrawler1074
9 ай бұрын
@@thehamjazz. Plus this. Station master also fantastic but I think this may cost money. Rm noise is free for now. Laters Simon. Check them out mate
@morecambeanglersandtrawler1074
9 ай бұрын
@@thehamjazz if you put that wee thing on a dowl with centrebpole raised 10feet and coax you would have a blast wooowoooo
@MrMudsHamRadioRadioTime
9 ай бұрын
Mr MuD approved. Nice work!
@DK5ONV
9 ай бұрын
Tnx for making my Day Simon, yo uare awsome.
@FrankBrickle
9 ай бұрын
Try flipping it on its side. 2m ssb is fun too.
@thehamjazz
9 ай бұрын
Wooohooo thanks Frank. That's also in the plan buddy to do some 2 Meters SSB and also Digital. It's been a fun little project. Thanks for swinging by and leaving a comment mate. Cheers!
@morecambeanglersandtrawler1074
9 ай бұрын
@@thehamjazz yes aim it at says
@FrankBrickle
8 ай бұрын
@@thehamjazz You can try some towards Vancouver west side too. I'm on the top floor of my building with approximately line-of-sight to Victoria and 2m ssb and a yagi to boot ;-)
@chrishorne2740
9 ай бұрын
Great project Simon. We're back in /7 land and will be looking for your call. KA1XK/7
Пікірлер: 34