Watch as we put on solid rubber tires on a Exmark 48in Radius. The tires were $129.00 on Amazon www.amazon.com...
1. Remove the old tires
2. There are a cap that sits on each side of the tire where the bolt hold the tire on the caster. Remove those.
3. Next you see a metal pc with 2 flat spaces on each side of it where the long bolt goes through. Unscrew those until the come completely off. 1 on each side.
4. Remove the long hollow shaft that both those rounded nuts where on.
5. Put the hollow shaft in to the new run flat tire
6. You should have spacers for each tire. Put a spacer on each side.
7. Put the caps back on, one on each side. Note: the caps don't screw on. You have to hold them in place while putting them back on the caster.
8. Once you put the long bolt back through the caster fork to the tire and out of the other side of the caster, tighten everything down.
9. You may need to grease the new shaft and tire. If you don't have a grease nipple on the tire, grease the shaft prior to bolting everything down.
Good Luck!
Негізгі бет 2 Solid Rubber Front Tires for Exmark Mower for $129 total on Amazon
No video
Пікірлер: 14