Prices on these finally coming back down to earth. Sold all my toys during the price hike. Now it's time to buy again.
@TimeMachinesATVs
3 жыл бұрын
Haha yessir
@billyb7561
2 жыл бұрын
@@TimeMachinesATVs Next time use automotive plastic/urethane bumper cover stripper. Less agessive and is meant for what you were doing. "SEM" is one brand that sells an aerosol version.
@yaboysamshep1470
3 жыл бұрын
That’s why you want to have friends like that , good friends , he has stuff all over the yard , he’s fully committed on this one 😂😂😂😂😂 I laughed so hard
@TimeMachinesATVs
3 жыл бұрын
Lol not sure where the part went but i said he will get it done. Thats all that matters rain or shine etc. those r the typa friends ya want
@Hanky_Bannist8r
3 жыл бұрын
You just taught countless folks how to get up in there. I'm so excited for the 350x !!!
@TimeMachinesATVs
3 жыл бұрын
Haha appreciate ya hanky comin soon!
@Davido50
3 жыл бұрын
Rad dude. Save Sport Quads!
@danjim7056
3 жыл бұрын
I've done so much work on cars crawling around in the muddy snow working out of a little shed. I'm greatful I have a garage now and switched cars for bikes and quads.
@TimeMachinesATVs
3 жыл бұрын
Same here !!
@Jonny2Fingers
3 жыл бұрын
Man that is genius having oil in a soap dispenser. Blew my mind! 21k coming in hot. Amazing video packed with info and good laughs! And I can’t wait for the 350EX build!
@TimeMachinesATVs
3 жыл бұрын
Coming soon jonny! I usually like a condiment bottle better but then the oil get contaminated after a while. Dollar general 1$ oil dispenser lol
@FarmerBrown420
3 жыл бұрын
You from.nc
@DABEAST691
2 жыл бұрын
25:00 he was spot-on on not using that wrist pin bearing. Those only last about 20 hours before they end up heading out the exhaust. Get a reputable name brand needle bearing from all balls or wiesco if you need a new one
@TimeMachinesATVs
2 жыл бұрын
Yessir.
@fabiogalindo8982
2 жыл бұрын
Awesome video. I have that exact same blaster, I believe a 2004. On mine my piston skirt broke in a lot of pieces breaking a piece of my crankcase off. I got I welded and bought a new OEM piston. I’m excited to get my blaster up and running. All I’m waiting for is a oil seal.
@dylanh4657
3 жыл бұрын
Hey, I was the one that commented about memories of my LT80 on the last video. If you get a REALLY clean used LT80 of any year (Preferably a yellow with blue seat one, like my 88 as a kid) post if on the tubes, so I can see. I will most definitely buy it, and either drive the 1000 miles to get it with my son, or have it shipped. He just turned 8 and I'd love to get him into the hobby, I was around the same age when I got my brand new 94 PW80 and 1988 LT80.
@TimeMachinesATVs
3 жыл бұрын
I will do. Theres a few lt80 videos on channel as well!
@dionhorn5624
3 жыл бұрын
Ebay all the way. You and your boy doing a great job. Blaster was black and now white...what... Like that 1 wheel wheelie. Good job guys
@TimeMachinesATVs
3 жыл бұрын
Appreciate it dion. Had to get rid of that spray paint job
@caryorban8322
2 жыл бұрын
Hell ya David! I'm sure the neighbors are luvin ya!! That's a true mechanic rite therrr!! Turned his front yard into his shop just to get his truck done!! Great job on the rebuild of this master blaster!! Ya always do great work bro
@TimeMachinesATVs
2 жыл бұрын
Haha no excuses!
@rowdysworld22
2 жыл бұрын
I just got the same blaster, 2004 white with red frame. It’s a beast just won’t idle at all, going to try to drill a new idle screw because previous owner removed the Tors.
@TravisJones1979
3 жыл бұрын
gave this a full watch start to finish.. loved it!!!!!!
@TimeMachinesATVs
3 жыл бұрын
Appreciate ya travis ! Might post another today
@Blockhead_teda
2 жыл бұрын
Just got a nine running blaster for a Chinese pitbike , confident I can get it running
@TimeMachinesATVs
2 жыл бұрын
Nice trade!
@kevinlepage123
3 жыл бұрын
Was on a blaster this weekend with a big bore kit and I really enjoyed it .nice find that should sell fast take care guys
@TimeMachinesATVs
3 жыл бұрын
They are my favorite kevin! Appreciate ya bro
@Davido50
3 жыл бұрын
Keep it Yamaha 💯 boys! 😀 Got me a legendary '11 YFZ450X Bill Ballance (I'm orig owner..quad has only 4hrs on it! It's now fully prepped to race locally). Picked up a '21 Raptor 700R-SE in June. My dream machine. Worried Yamaha may discontinue soon as I've heard rumors. *Btw, both the YFZ450R & Raptor 700R are selling like hot cakes even @ $10k* . - NW Ohio
@TimeMachinesATVs
3 жыл бұрын
Love my yammer hammers
@stephengalvan7722
2 жыл бұрын
I wish I could find one for $200 bad ass can't wait for more blaster videos
@TimeMachinesATVs
2 жыл бұрын
we got blaster videos for days, and more to come. thanks for watching Stephen!
@stephengalvan7722
2 жыл бұрын
@@TimeMachinesATVs your shop is bad ass can't wait to leave California
@ricardoguerra9411
3 жыл бұрын
Awesome Mechanic Wisdom shared...Also your buddy had that whole engine apart on the driveway..That takes some muy grande cahones.
@TimeMachinesATVs
3 жыл бұрын
Yeah no shit. He was 100% committed it was back together that evening. And now sounds/runs excellent. Compared to before
@michaelshiflett3391
3 жыл бұрын
I love how you did those tires! Lol Blasters are awesome machines.
@TimeMachinesATVs
3 жыл бұрын
Best way i aint fkin around for 2 hrs tryna change these. Support local business lmao
@craigkennedy1684
2 жыл бұрын
Always wanted a blaster when I was younger but my dad hated two strokes. Now I’m Looking for one for my boy. Prices seem to still be jacked found one that looks like a complete turd with spaghetti wiring hanging off it and add says it needs a top end for $600. At $200 this would be a no brained to pick up. Good find and good video my dude.
@Topflight44
3 жыл бұрын
Fully committed on that truck job 😂😂😂
@TimeMachinesATVs
3 жыл бұрын
Lmao yeah he was
@eddiesheeran5791
Жыл бұрын
Thanks for all the tech tips! Great video!
@TimeMachinesATVs
Жыл бұрын
Hell yeah more to come
@sharonjordan3574
Жыл бұрын
TimeMachines where should I get a top end rebuild kit
@DhRiffs
2 жыл бұрын
Blaster blaster videos please, love you guys´s videos here in Costa Rica Get up in there!!
@TimeMachinesATVs
2 жыл бұрын
More coming!
@MegamanSkywalker
Жыл бұрын
I think you are supposed to have the tool at 90 degrees for the torque wrench to be accurate. Thats how it is for the AR barrel nut anyway. Great vid!
@TimeMachinesATVs
Жыл бұрын
If they are plus minus 2-4 lbs but even that works fer me lmao
@gavindonald1874
3 жыл бұрын
Enjoy watching your videos man I learn something everytime I watch your channel
@TimeMachinesATVs
3 жыл бұрын
Thanks gavin!! Lots more to come.
@Brianlsvtec
3 жыл бұрын
I need to pick up another blaster! Such a fun little machine
@TimeMachinesATVs
3 жыл бұрын
They are a lot of fun!
@max_murphy2511
3 жыл бұрын
Got my first 2 stroke, all original 89 quadracer 250. It’s be cool to see one on the channel eventually 😎!
@burnheretic3950
3 жыл бұрын
He has had some on the channel, search thru his old videos.
@TimeMachinesATVs
3 жыл бұрын
Have a few on channel ! Nice white 89 made video of a while back
@bobbymckinney1264
3 жыл бұрын
Nice blaster,she runs good now after getting up in there,love the channel!!
@TimeMachinesATVs
3 жыл бұрын
Thanks bobby! Blasters are my favorite
@alechharper2681
Жыл бұрын
So did you turn it upside down to get broken pieces out? Part of my piston broke off and I haven’t found it up too you think if I turn it upside down and do the same it may fall out? It still a good crank I’d hate to break it open to just get that piece
@Angel-nt2ob
3 жыл бұрын
I have a Yamaha blaster200 2002 and it won’t stay on in Neutral it starts first kick but just won’t stay on any suggestions please and thank you ?
@TimeMachinesATVs
3 жыл бұрын
Adjust the idle?
@Angel-nt2ob
2 жыл бұрын
@@TimeMachinesATVs I’m gonna try that thank you
@dylandunne1165
3 жыл бұрын
Those motion pro torque adapters are awesome. Wish I had got mine years ago
@TimeMachinesATVs
3 жыл бұрын
Yeah they’re necessary for sure
@chillycheeze2207
3 жыл бұрын
"Thats a nice crank, smoke it david"🤣🤣
@TimeMachinesATVs
3 жыл бұрын
Lmfao
@bradmorton4254
2 жыл бұрын
Hey guys thanks for the content. I enjoy watching all your videos but this one helped me tremendously because i have a 95 blaster and the top end just went out I ordered the wiseco rebuild kit. I hope that's a good one because I have no idea what the hell I'm doing. Thanks guys keep it up
@JuanGarcia-oz6sg
2 жыл бұрын
Have you rebuilt it ?
@thelakecommander7632
3 жыл бұрын
Nice rebuild video. Digging that new hair do as well!
@TimeMachinesATVs
3 жыл бұрын
Haha beards gettin trimmed next
@savagelif3302
2 жыл бұрын
I just got a 01 blaster free I'm watching you fellas to rebuild her and have it screaming once again she striped down and ready for paint now
@mxbeanz1206
3 жыл бұрын
The best atv channel there is!
@TimeMachinesATVs
3 жыл бұрын
Appreciate ya dean!
@Mongoloidmyke
3 жыл бұрын
I always learn something, and enjoy watching. Thanks man you are killing it!
@TimeMachinesATVs
3 жыл бұрын
Thanks 187!! Lots more coming
@nolove332245
3 жыл бұрын
Yea ive used a few ebay kits before not bad for the money. Screw amazon lol never use em. Great video bro like always! Stay up in there and be safe
@TimeMachinesATVs
3 жыл бұрын
Appreciate it matt. More coming this week
@Fr331995
Жыл бұрын
Thats the most well packaged rebuild kit ive seen lol😅
@TimeMachinesATVs
Жыл бұрын
Appreciate ya, I agree!
@riazamjad9276
3 жыл бұрын
Get up in there dude!!
@TimeMachinesATVs
3 жыл бұрын
Yessir
@fernnandogonzales5893
Жыл бұрын
We just got one for my check. How do I mix the gas on it like what gas cans should I get to mix the two stroke?
@andyarends4090
3 жыл бұрын
Great work! Fun little quads…
@TimeMachinesATVs
3 жыл бұрын
Yeah they are
@julianr1742
2 жыл бұрын
With that torque wrench adapter you have to do a calculation. Just setting the torque wrench to the torque spec does not make it correct, with the extra length of the wrench gives more torque and thus that was more than 20 ft pounds.
@TimeMachinesATVs
2 жыл бұрын
At least theyre all even
@FishingWithJo415
Жыл бұрын
Hows it going! On my blaster it been sitting for almost a year. cleaned the carb and for some reason the gas dont go through the carb. the bowl is dry but gas comes out the tank?
@treygrebner2810
3 жыл бұрын
Get up in there buddy! Love the vids can’t wait for the X!
@TimeMachinesATVs
3 жыл бұрын
Coming very soon!
@ericsilverware4561
3 жыл бұрын
Best video thus far great work time machines best atv content on the interwebs! 🔥
@TimeMachinesATVs
3 жыл бұрын
Thanks flower power!! Lots more coming
@coyotekelly7143
11 ай бұрын
You have to have the torque adapter at a 90 degree angle to achieve proper torque, or use the head length chart to compensate if using it straight on
@THEDUKELOVER
3 жыл бұрын
gotta love the simple old two stroke 💙💪
@TimeMachinesATVs
3 жыл бұрын
Sure do
@THEDUKELOVER
3 жыл бұрын
@@TimeMachinesATVs dam right! check my page thats all i WANT nice build keep up the good work bro you have awesome channel
@tommyjefferson9525
Жыл бұрын
You guys are great love the Channel you do great work so keep on keeping on
@TimeMachinesATVs
Жыл бұрын
Appreciate it tommy !
@Skubadav69
3 жыл бұрын
Yeah I bought one of those reed boots said it was for a blaster but didn’t come plugged off but I bought one of those tach out performance heads that’s a 20cc dome I like it
@TimeMachinesATVs
3 жыл бұрын
Also turns carb slightly away from airboot but it worked some how
@freddymartinez4822
2 жыл бұрын
@timemachines I got a 2002 I'm looking into restoring everything, your videos are definitely the inspiration
@theangelcastillo4913
2 жыл бұрын
If I buy a 28mm carburetor do I have to worry about the Tors system delete kit? What carburetor would you recommend?
@billyhickey2330
2 жыл бұрын
I weigh 240 pounds and am about 5'8 I was thinking about one of these to rip around the yard, ride trails and ride with my kid with cause they're super cheap to rebuild. I'm considering one of my bikes for trade for one... Contemplating. Do you think I'm a good size for a blaster or too big?
@ChuckNorris01
21 күн бұрын
How do I know what year blaster I have? Other than the headlights how do I figure out exactly what year I have?
@Kindaquick1
3 жыл бұрын
" if you get real close you might get to take a nap " Hahahahahahaha!
@TimeMachinesATVs
3 жыл бұрын
Lmao
@WatchBillywork
3 жыл бұрын
Do you know if you do tors delete on Yamaha Blaster do you need a different throttle cable or does the stock one work the same
@TimeMachinesATVs
3 жыл бұрын
Works same but if ya want full delete need cable and throttle cap. Otherwise unplug it all and send it
@WatchBillywork
3 жыл бұрын
@@TimeMachinesATVs thanks I really helps it has the full delete kit when the guy I got it from re-ran the old wire they ran up by the exhaust.. and then put black tape around it
@craigsmith9156
3 жыл бұрын
sweet 1000 times better thats a nice bike
@TimeMachinesATVs
3 жыл бұрын
Thanks craig!
@kylelangworthy9641
3 жыл бұрын
Hey brother I don't know if I missed the video or if you made one about it but I was wondering do you still have that rmz250 Big Bore I got a 2004 RMZ 250 in great shape I'd love to have another one
@TimeMachinesATVs
3 жыл бұрын
It sold
@jadonanderson8080
3 жыл бұрын
I really like the blasters they really awesome
@TimeMachinesATVs
3 жыл бұрын
My favs
@sbalestro
3 жыл бұрын
Sweet video, I always learn something from you, appreciate it!
@TimeMachinesATVs
3 жыл бұрын
Thanks shawn
@jasonkoz8985
3 жыл бұрын
A piece of advice if people don't know is to make sure you have the correct sparkplug in. I had the wrong one in apparently and blew a hole in the piston.
@TimeMachinesATVs
3 жыл бұрын
Always! Too long = piston kisses
@shaynedonnelly374
3 жыл бұрын
Chea dudes. Rebuild knowledge is key when you're hard on the gear. These are the China kits you got that you returned from the video wear buddy forgot to wear both shoes lmao
@TimeMachinesATVs
3 жыл бұрын
Lmao. The send backs were
@hb91
3 жыл бұрын
Best shit on KZitem to watch thanks for knowledge brother Jarod your very good at explaining how to tear bikes down n short cuts .Can't wait to see you at 50 k on here it's coming in time I'm share your videos
@robert-hr3el
3 жыл бұрын
Just bought one just like this Thanks bro
@TimeMachinesATVs
3 жыл бұрын
You bet robert
@Geeker.
3 жыл бұрын
Finally the vid I’ve been waiting for
@TimeMachinesATVs
3 жыл бұрын
Heck yeah appreciate ya logan. Lots more to come.
@tomlenza2768
3 жыл бұрын
Awesome video! Good information as always. Get in there boys!
@TimeMachinesATVs
3 жыл бұрын
Appreciate it tom
@creek_made
3 жыл бұрын
I like your shop, bud -is that closed cell insulation blown in there? How thick did you go? Good vid.
@TimeMachinesATVs
3 жыл бұрын
1.5”
@Me23-e4u
2 жыл бұрын
I just got a 2002 blaster so if I take off the Air box Lid that will help it run better
@TimeMachinesATVs
2 жыл бұрын
not always, thanks for watching hash!
@Me23-e4u
2 жыл бұрын
@@TimeMachinesATVs So is it better just to keep the lid on
@cletusbowling923
2 жыл бұрын
Thanks for the video. You taught me alot here on this video
@martinmartinez8161
2 жыл бұрын
How's that top end kit holding up? How many hours have you put on it?
@SmalltownBoy-jf5pl
2 жыл бұрын
Do they make a big bore kit that can be used with the stock crank an rod? I have a blaster an wanted to big bore but don't wanna do a stroker
@markbarton4344
3 жыл бұрын
Damm right she's done! Sucks you had to go through that though. Now you know and knowing is half the battle, GI joe!
@TimeMachinesATVs
3 жыл бұрын
Lmao for sure it is!!
@rondomvideohd
2 жыл бұрын
How to buy Yamaha blaster second sparepart on your garage? I want to buy completely cylinder of Yamaha blaster
@dylandunne1165
3 жыл бұрын
Up in my neck of the woods. I live about 15 minutes from Decatur Tire
@TimeMachinesATVs
3 жыл бұрын
Haha same here
@killianlastname1108
3 жыл бұрын
I'm almost 5k into trying to fix mine. After all that money and found out a few weeks ago, the crank case is cracked and that's been my issue. Only got one to ride with my dad on his blaster. I could've bought 3 blasters with the money I put into mine. Such a mistake.
@TimeMachinesATVs
3 жыл бұрын
Man that sucks. Leakdown test may have helped. Usually will show ya where case is leaking. Important tool for blaster trouble shooting
@canyougetthat507
3 жыл бұрын
Where are you located? I’ve got a raptor 700, only sparks
@TimeMachinesATVs
3 жыл бұрын
Ft worth texas
@TheeCritical
Жыл бұрын
Do the tires you bought fit on the stock blaster wheels?
@Brianlsvtec
3 жыл бұрын
"Don't eat this and don't smoke the glue" 😂😂
@TimeMachinesATVs
3 жыл бұрын
Lmao do not do that. Kawasaki guys do that stuff
@coltonmick8610
3 жыл бұрын
when i get a blown up quad i put the quad up on the grab bar and power wash the crank out then soak the crank in two stroke.
@TimeMachinesATVs
3 жыл бұрын
Gotcha
@Haze-derr
8 ай бұрын
So how did u break it in on the heat cycles
@mauros.3996
2 жыл бұрын
what is the approximate cost of a 1995 yamaha blaster in the united states?
@TimeMachinesATVs
2 жыл бұрын
It varies. Between 800-2500$
@murph2521
3 жыл бұрын
Getting up in there son! Love the rebuild how to s brother
@TimeMachinesATVs
3 жыл бұрын
Lots more coming murph
@murph2521
3 жыл бұрын
@@TimeMachinesATVs awesome man I'm always watching and yall have my support
@topher4050
7 ай бұрын
you're over torquing those bolts. if you're using the motion pro adapter thing it needs to be at a 90 degree angle to the wrench. if its straight out like at 29:45 you're adding leverage and throwing off torque specs. just so you know
@858415
3 жыл бұрын
Loving the channel guys🤟
@TimeMachinesATVs
3 жыл бұрын
Thanks matt!
@markeithpeacock222
3 жыл бұрын
Nice blaster up in there
@TimeMachinesATVs
3 жыл бұрын
Thanks markeith
@CO-LOBEATS
3 жыл бұрын
Awesome dope video my guy !!
@TimeMachinesATVs
3 жыл бұрын
Thanks colo!
@Brianlsvtec
3 жыл бұрын
Get up in there 🤙🖖
@TimeMachinesATVs
3 жыл бұрын
Yessir
@xr3703
3 жыл бұрын
Are those oem rims with aftermarket tires?
@TimeMachinesATVs
3 жыл бұрын
In rear I believe
@matthewprovost9879
3 жыл бұрын
@TimeMachines Whatever happened to blake?
@TimeMachinesATVs
3 жыл бұрын
Quit showing up
@matthewprovost9879
3 жыл бұрын
@@TimeMachinesATVs damn dude. If you ever need someone just to yell and throw stuff at, lmk. Ive got thick skin once the 2 stroke starts burning. LOL
@roynelson7613
3 жыл бұрын
Hell yeah you guys awesome rebuild after the China malfunction that's aggravating big thumbs up y'all👍🏽👍🏽👍🏽👍🏽👍🏽
@TimeMachinesATVs
3 жыл бұрын
Haha appreciate ya roy. Lots more coming
@dylanh4657
3 жыл бұрын
When you were spraying that shit, you should've been playing some Ramones. 🎶. Now I wanna sniff some glue... Now I wanna have something to dooo! 🎶
@TimeMachinesATVs
3 жыл бұрын
Lmfao
@PearlyS10
2 жыл бұрын
Hey you guys are good with 2 strokes, I need some help
@brianj123458
3 жыл бұрын
Honda oil in the Yamaha im surprised the poor blaster did not vomit lol 😆 😅 😂 just kidding love your videos have great day
@TimeMachinesATVs
3 жыл бұрын
Lmao itll live
@brianj123458
3 жыл бұрын
@@TimeMachinesATVs LOL 😆 😂 🤣
@eddiepad5387
3 жыл бұрын
I got a rebuilt blaster not too expensive but it runs good the only thing it takes alot of kicks to start, besides that it runs and sounds good
@eddiepad5387
3 жыл бұрын
What could it be?
@505fastlife6
3 жыл бұрын
You need to do a leak down and compression test. South Texas banshee sells leak down testers on eBay.
@TimeMachinesATVs
3 жыл бұрын
Yessir. Leakdown test. It’s likely an air leak
@theOneandOnlyhomieG
2 жыл бұрын
@@505fastlife6 STB is by far the most impressive vendor in this community and I am so glad I found him. Didn't know he did the leak tests, so I am gonna send him a text and get fixed up for one since they're nice to have.
@thomashouts4429
3 жыл бұрын
Homie got his ears tucked Clean
@TimeMachinesATVs
3 жыл бұрын
Lmao
@ThePunis-Her
2 жыл бұрын
What cilinder did you buy?
@user-gj6kk3er8u
2 жыл бұрын
where in TX are you located? I got a blaster I want to bring back to life
@TimeMachinesATVs
2 жыл бұрын
Dfw area and I just buy and sell, don't fix for anyone lol. Unless you want me to rebuild the motor, just mail it to me
@kylelangworthy9641
3 жыл бұрын
I definitely agree don't use bearings that sound like a maraca LOL
@TimeMachinesATVs
3 жыл бұрын
Lmfao for sure
@Abrahamf1467
3 жыл бұрын
Get up in there !! 🤘🏼how big is that shop you built ?
@TimeMachinesATVs
3 жыл бұрын
30x50
@SoLoCruizer
3 жыл бұрын
Get ALL uP ALL thE Way iN THeRE !!!!Repeat this ProceSS!!!!!
@TimeMachinesATVs
3 жыл бұрын
Yessir. Dont quit till she says youre done
@SoLoCruizer
3 жыл бұрын
@@TimeMachinesATVs thanks man
@guccie95209
2 жыл бұрын
Brotha what 2 stoke oil and what ratio do u use
@TimeMachinesATVs
2 жыл бұрын
Depends on machine but generally 32:1 for trail riding. I like castor or klotz maxima rtc
@guccie95209
2 жыл бұрын
It's for a blaster
@randygreenoe7892
Жыл бұрын
Parts in the link u gave us really jumped in price..$950 for the top end..
Пікірлер: 293