Installing an ATOTO A6 Android stereo head unit into a 2000 Buick Regal while retaining steering wheel controls.
This should be similar for Pontiac Grand Prix, Chevy Malibu and more.
Buy the ATOTO A6 Head unit here: amzn.to/3YfOa7n
Buy the ASWC-1 Here: amzn.to/3We1Huj
Buy the ATOTO Backup Camera here: amzn.to/3ByQUD0
Backup Camera Install Video -- • Backup Camera Install ...
****Please make sure to disconnect the battery before any wiring projects, cutting or splicing!
You will need a steering wheel controller: Axxess ASWC-1
ASWC-1 Programming Instructions:
metra-static.s3.amazonaws.com...
Wiring & Programming instructions for ASWC-1 to ATOTO:
--IMPORTANT: DO NOT use the 3.5mm Female input (SWC IR
WIRELESS Steering Wheel Key Control Port) on the back of
the Atoto A6. This port does not work for some reason
*Connections to the Car*
P Download the vehicle specific instructions for your car, as
well as the "Axxess Steering Wheel Control Interface
Installation Manual" (two different PDFs) from
axxessinterfaces.com
2. Follow the vehicle specific instructions to first connect the
AWSC-1 to your car.
*Connections to the Radio*
1.
The aswc-1 includes a female 3.5mm connector with a
brown and brown/white wire coming out. Use this to connect
to the Atoto's Steering Wheel Key(+) and Steering Wheel
Key#(+) wires
2. Connect the "Steering Wheel Key+" wire of the Atoto A6 to
the Brown/White wire of Axxess ASWC-1, connect the
Steering WheelKey#+" wire of the Atoto A6 to the Brown
wire of the aswc-1
(yes, both of these wires are positive. l don't know who or
why but it works.)
3. Plug the male 3.5 mm jack from the aswc-1, into the
female 3.5 mm jack that you wired up in step 2.
4. The ASWC-1 will NOT auto detect the Atoto A6. (don't
worry,
not a problem)
5. Follow the instructions from the "Axxess
Steering Wheel Control Interface Installation Manual" to
change your radio type (Linked above)
Change your radio type to "Visteon'". (Visteon is radio type 8)
7. At this point you have completed configuring the aswc-1
Next, move on to your radio
8. From the radio navigate to: Settings-Device-Steering Wheel program
9. Once at the screen press "Reset"
10. Hold the desired button on the steering wheel and simultaneously press the desired action on the ATOTO screen. If the programming was synced, the action button on the stereo screen will be highlighted RED.
11. Repeat steps 10 until you have programmed all the
steering wheel control buttons. Then Select "Save" on the screen.
12. Test, you should be done!
Tags 1997, 1998, 1999, 2000, 2001, 2002, 2003
Негізгі бет Автокөліктер мен көлік құралдары 2000 REGAL GS ATOTO ADROID HEAD UNIT INSTALL I WITH STEERING WHEEL CONTROLS
Пікірлер: 7