Good video. Thankyou. Its a great method to make the fuel pump accessible
@jamesrobert782
10 ай бұрын
I also did this on my blazer, it works great, alot easier and faster to get to the fuel pump, and for those who say it's not, or it's not a good idea, try dropping the tank yourself and find out.
@nukedude
7 жыл бұрын
Great video. I made my own for my 2000 Blazer. Same place though. Wish I had found this a few days earlier, it would have helped me save some time. I agree that there seems to be more room on this version of Blazer than the older ones. I used an angle cutter and had an easy inch and a half between the single layer panel and the tank. My hinge in my video is where the double layer was, and it helped me change the hoses. I have large hands, so I needed more room.
@abdullaex4119
2 жыл бұрын
Cut the sheet metal on 3 sides. Score 1 side to make a hinge. Pull back sheet metal panel to access fuel pump. Install pump and check operation. If OK I bend back the sheet metal panel and tack weld in place. Fill the voids with silicone caulk. Carpet seat and go. There is also a check location around the brake system under the hood. Looks like a red female bullet connector. Put 12 volts to it and listen for the whine of the fuel pump. If it works? Good luck
@puterman1999
5 жыл бұрын
Love this thank you! Didn’t wanna lay in the mud for some shitty old truck!!!
@stevearmstrong4561
4 жыл бұрын
Just done mine..Thanks for the video.
@h33t18
2 жыл бұрын
I like your pic, I now know where to cut my access, thanks!🤗
@billjenkins687
3 жыл бұрын
After having to drop the f-ing tank twice on this truck, I am going to cut the floor and make it easy.
@ra777wow
7 жыл бұрын
Good for you ! I want to do this on my 2000 blazer..
@Thinker669
4 жыл бұрын
To make it easier to drop the tank, you have to remove the drive shaft to have more room.
@arcadianrust
5 жыл бұрын
hack it up!!!!!...it's an old ass blazer no one gives a shit about as long as it runs. Good video.
@josebaez9138
7 жыл бұрын
Do you have video of the whole process I need to change my fuel pump asap
@petemoss4133
5 жыл бұрын
Ata Boy Girl....and.For all those genius's that say dropping the tank is easier. Maybe if you have a shop and a lift. But we have done this to more than one vehicle and it is bad ass. And the next time the pump craps out all PJs onatrip has to do is pull the seats, no cutting. She will be drinking a beer while your still putting your tanks back in.
@crazeeashell
5 жыл бұрын
@@petemoss4133 Hell yea!
@crazeeashell
5 жыл бұрын
Sorry I didn't see this sooner. I hope everything worked out
@josebaez9138
7 жыл бұрын
How far is the hole from the door entrance?
@crazeeashell
5 жыл бұрын
It's like 6in not even that it's literally right under
@gunnuts82
6 жыл бұрын
Angle grinder would have been much cleaner and quicker.
@freakyflow
5 жыл бұрын
Hey maybe even a blow touch ...
@crazeeashell
5 жыл бұрын
@@freakyflow yeah that would have been really exciting!
@Geno79
4 жыл бұрын
Good job but no context...zoom out
@CinematicTouchProductions
4 жыл бұрын
I don't know about cutting my floor just to get access to fuel pump. It looks like you had a real hard time the floor looks bust
@austinwagoner2422
5 жыл бұрын
Or you do it the right way and drop the tank it would be easier than that hack job in your floor
@cj599
5 жыл бұрын
hack it up great not easier that droping the tank use a floor jack and drain it first easy
@crazeeashell
5 жыл бұрын
Of course it's not easier than dropping the tank. That is if you have a floor jack and all of the comforts of an equipt garage. It really wasn't that hard.
Пікірлер: 25