I am glad you found my KZitem channel with a variety of videos mostly related to car, tractor, and motorcycle repair. In this video, I show you how to disassemble, assemble, lap valves, and inspect the cylinder head on a 2002 Honda Shadow 1100. Below I am including time stamps to help you find the exact information you need easily. As always thank you for watching.
1. From 00:00 to 00:16, is a quick summary of the contents of the video.
2. From 00:17 to 01:47, the exhaust valve is removed.
3. From 01:48 to 02:41, the first intake valve is removed.
4. From 02:42 to 03:21, the final intake valve is removed.
5. From 03:22 to 04:07, the valve seals are removed.
6. From 04:08 to 07:20, the remains of the head gasket are removed, the cylinder head is cleaned, and the locating dowels are removed.
7. From 07:21 to 08:58, the cylinder head is inspected for warpage and cracks.
8. From 08:59 to 13:16, the valves are cleaned and the valve stem and springs are checked with a digital caliper. (Inner valve spring length minimum length: 39.99mm or 1.57in.) (Outer valve spring minimum length intake 43.90mm or 1.728in) (Outer valve spring minimum length exhaust 41.80mm or 1.646in.) (Intake valve stem 6.57mm or 0.259in) (Exhaust valve stem 41.80mm or 1.646in)
9. From 13:17 to 16:24, valve lapping is explained and demonstrated.
10. From 16:25 to 18:50, the lower valve spring washers and valve seals are installed.
www.napaonline.com/en/p/BK_76...
11. From 18:51 to 21:18, the first intake valve is installed.
12. From 21:19 to 22:28, the last intake valve is installed
13. From 22:29 to 24:04, the intake valve is installed.
Негізгі бет Автокөліктер мен көлік құралдары 2002 Honda Shadow 1100 How to Disassemble, Assemble, Lap Valves, and Inspect the Cylinder Head, 4k
Пікірлер: 6