Nicely done. That thing gallops! I just bought an ‘04 GT. Can’t wait to get it on the road this spring!
@emergencyresponsevideosand4423
8 ай бұрын
man: 0-60 MPH car: casually reaches 95 MPH
@Befindox7
Ай бұрын
i love those types of vids hahaha
@agentfernandez1473
2 жыл бұрын
makes me miss my 04 GT it blew a head gasket this past weekend :(
@slammingbrutaldegeneracy2561
10 ай бұрын
damn that thing scoots, 5 seconds is not bad at all
@svenlindsey1553
6 ай бұрын
Damn that’s fast
@mercury0214
3 жыл бұрын
That rattle at higher rpm is a spun bearing probably from revving this thing above 6500 on stock crank
@luisuribe5432
3 жыл бұрын
Um so what if its the stock crank?
@luisuribe5432
3 жыл бұрын
I’ve seen them rev to 7k with heads and cams, nothing done to the crank
@mikehigby7897
2 жыл бұрын
@@luisuribe5432 the beauty of OHC motors.
@OhPhuckYou
2 жыл бұрын
All I hear is wind noise, exhaust, and some microphone clipping.
@thatcarguy0710
2 жыл бұрын
lol honda goes to 9k on stock crank😏 i would love to own this over a Honda tho
@Knava999
3 жыл бұрын
service your engine soon
@angelgjr1999
3 жыл бұрын
Nah. These 2 valves are unkillable. I drove with a check engine light on for years.
@alexvillarreal3947
2 жыл бұрын
@@angelgjr1999 lol thats true..
@mitch9521
11 ай бұрын
Sick launch lmaoooo
@ianscheurer
4 жыл бұрын
Hi, I know you don’t own the car anymore but do you know the average stock 0-60 for the 2V mustangs from this era?
@megasimp1024
3 жыл бұрын
around 5.5 seconds for the coupe, 6 seconds for the convertible
@alexvillarreal3947
2 жыл бұрын
5.5 for manuals coupe, 6 for auto coupee and 6.8 for convertible auto...
@timothygarrity5181
Жыл бұрын
I have 373s in mine and it is around 5.3.
@alpe6228
10 ай бұрын
the 0-60 isnt bad on those,its after 60 that it literally dies out.Those 2v are beyong slow for having a v8.
@smotpoker15
8 ай бұрын
@alpe6228 my old 2v ran 11.7 @ 117 for under 3k of mods. Tell me again they're slow . My s550 with a paxton on it runs 8mph faster and it has 10k of mods lol
@georgecortez9070
2 жыл бұрын
Hey!!! That was to 100🤫
@fastfords9072
2 жыл бұрын
Do you still have this mustang? What was the best quarter mile time and 0-60????
@fastfords9072
2 жыл бұрын
I don't hear no spun bearing sounds good to me
@1300Rvideo
2 жыл бұрын
Hell no lol. I've had like 3 cars since this one, my best 0-60 time was around 5.1 seconds and I never took it to the strip so idk what my 1/4 mile time would have been
@perfectionish7232
2 жыл бұрын
I ran bone stock 04', 5 speed, no weight reduction, and a car seat, 14.001 @ 101. Beat an 02 Lightning that round
@carloscaamal819
7 ай бұрын
Are the 2 valves good engines? How much HP can it handle?
@1300Rvideo
7 ай бұрын
Probably like 400 before you need a trans upgrade
@ericwagner413
6 ай бұрын
@@1300Rvideonah I’ve seen guys running 560whp on stock transmission just fine
@NewEdgeDesigns
5 ай бұрын
Depends on the year, the Tr3650 that came in them after 2001 can hold more power.. it was upgraded to be used in the Mach 1 and S197s..
@esuccandzxmbie3437
3 ай бұрын
These 2 valve engines are pretty bulletproof. My 2000 GT has 170K miles and the motor still rips good! I maintain mine religiously with oil and fluid changes. Just did a reseal of the valve covers, oil pan gasket and timing cover gaskets. I was happy to see the cam lobes still have the machining marks and the rest of the block was practically spotless
@NewEdgeDesigns
3 ай бұрын
@@esuccandzxmbie3437 the 4.6 is the most durable engine ever made right next to the GM 3800 v6..
@patch-files2160
Жыл бұрын
Same here. Not entirely sure what's done to mine but it's been molested. I run 4.8 0 to 60. The timing chain assembly is aftermarket. (Guessing mild cams from the sound and timing being upgraded also God knows what else deeper in the motor) and the tranny is brand new and built said the last owner. It rips like a jet in first and second. Also tuned and throwing out u-joints like they're going out of style
@CournoyerInc
8 ай бұрын
post a video of it
@jacielhernandez5863
2 жыл бұрын
What mods do you have on it ?
@1300Rvideo
2 жыл бұрын
Damn if I can remember... I think it had like a BBK 70mm throttle body, Stack Racing intake, Pypes offrad h pipe, Pypes violator catback and bama 93 tune
@jacielhernandez5863
2 жыл бұрын
@@1300Rvideo that’s badass brother
@1300Rvideo
2 жыл бұрын
@God Trojan nah that was 3 or 4 cars ago lol. I've been making bike videos these days
@Micahgavlock
2 жыл бұрын
@@1300Rvideo stock gears?
@1300Rvideo
2 жыл бұрын
@@Micahgavlock yea
@emergencyresponsevideosand4423
9 ай бұрын
0:16 first gear 0:18 second gear 0:22 third gear
@ethanmorrison1867
11 ай бұрын
How’d you get the blue cluster?
@slammingbrutaldegeneracy2561
10 ай бұрын
pretty sure new edges come stock like this lol
@Kgio-2112
8 ай бұрын
Blue lights
@hemicurry2967
3 жыл бұрын
These cars love high RPM. My redline is set at 6500
@1S1KC0DM4N
3 жыл бұрын
Never thought I’d hear someone say 6500 is high lol
@hemicurry2967
3 жыл бұрын
@@1S1KC0DM4N for a stock 2v rotating assembly it is
@davoli691
3 жыл бұрын
They really dont though
@hemicurry2967
3 жыл бұрын
@@davoli691 they do. N/A they will eat 7k all day.
@angelgjr1999
3 жыл бұрын
@@hemicurry2967 Are you sure? I always keep mine below redline.
@aviatrix4220
8 ай бұрын
🤯 that’s faster than a dodge
@solocamo3654
9 ай бұрын
Only good for 0-60 (barely) - these motors without major mods have zero top end
@mcb9644
10 ай бұрын
1.2 million miles ?
@armybeef68
4 ай бұрын
Oh look at me, I'm cool, I'm shifting gears.
@johntron1237
2 ай бұрын
Are you okay? You can’t be this miserable
@ivancoley11
Жыл бұрын
It sounds like a v8 volvo xc90
@TurboTurdBurglar
5 жыл бұрын
Tune?
@1300Rvideo
5 жыл бұрын
It had a bama 93 tune
@TurboTurdBurglar
5 жыл бұрын
I have a stock tune on my car and it feels like it struggles to go over 5700 rpms
@1300Rvideo
5 жыл бұрын
@@TurboTurdBurglar not sure what that could be...it's been 2 years since I've sold that car so I won't be much help. Maybe bad cams?
@TurboTurdBurglar
5 жыл бұрын
Did you have aftermarket cams?
@1300Rvideo
5 жыл бұрын
@@TurboTurdBurglar nope, those were stock. Sounds like something internal that's worn out and doesn't like being pushed to that RPM range.
Пікірлер: 120