Thanks to all the positive comments! And I'm sorry for not replying asap, just haven't checked this post in a while. To answer a few questions, all upgrades like fenders, lights, electrical components, foot pegs (BHP), etc. I got online (ebay). While the headlight I got from our local Yamaha dealer. And yes, I installed a 12V rectifier connected to the stock stator to charged a 12V battery under the seat. Rewiring was a pain though. Yes footpegs are clamped on.
@danhen222
10 жыл бұрын
Wow you did a lot to this bike. Looks really good! You must've squeezed a battery in there somewhere. I love the buddy pegs! Do those clamp on? Or did you weld them?? Again, very nice! I have a street legal one as well.
@dalav
5 жыл бұрын
Hi. Can you send me images of how those buddy pegs are fixated on the frame? I bought a wr426 2001 and I want to install buddy pegs on my bike, but didn't want to drill the frame or anything that compromises it. Searched everywhere on internet but nothing conclusive. Thanks in advance. Gorgeous bike you have there.
@panda_from_space
2 жыл бұрын
hello , how do you wire the ignition key ?
@k0conutk0mando
8 жыл бұрын
awesome bike. I'm getting some DNA wheels for my 426 soon. I love how you went with the newer style wr headlight. what gearing did you end up going with?
@andysabido2507
8 жыл бұрын
Thank you man! I think I used 16*49 sprockets. And I'm sorry it took awhile for me to reply.
@cupcake2945
9 жыл бұрын
hey how did you put the key on it? i just bought one and i want to put a key on it, thanks :)
@pierrat1
11 жыл бұрын
like its impossible to change plastics and light placements.. bike looks badass with that headlight and mirror/turning signals and fenders.
@alexisperez587
6 жыл бұрын
Hello friend, you put a battery to your yamaha wr 426?
@mytube6913
11 жыл бұрын
Does the headlight just swap right in? How did you make the seat sag less?
@cupcake2945
9 жыл бұрын
how did you make it electric start? did you use a kit? also how much did it cost? also the bike looks awesome
@andysabido2507
8 жыл бұрын
Thanks cupcake. It's not electric start, and I never found a kit to make it one.
@tomlogan6704
11 жыл бұрын
Were you get them rear pegs from online ? Sweet bike
@claytonmcminn1121
3 жыл бұрын
How much for all the upgrades? 4 or 5k?
@jamesc4196
7 жыл бұрын
Hey man, that key switch, how much did it cost to get installed? Also, what were the exact names of those blinker-mirrors. That's awesome. I'm picking up a 2001 WR426 tomorrow! :DDDDD I'm trying to set it up similar to yours. That key is a huge deal though, hopefully I can get one installed too.
@great2c4me
7 жыл бұрын
DeathIsLight hey how'd your 426 build come along? I've got an 02. You on any fb groups?
@scottymactiles
11 жыл бұрын
How do you have power without it running? I have the same bike but only has power via the stator while it's running. Do you have a battery set up in it? Oh, it's a sweet looking bike to.
@dtr1255
8 жыл бұрын
Hey man, my 2002 WR 426F doesnt have passenger pegs. Where and how do you stick it to the frame? Thanks
@andysabido2507
8 жыл бұрын
It's drilled to the frame.
@assbutt52
7 жыл бұрын
André Valente do you have any idea what the model number is for those pegs??
@andysabido2507
7 жыл бұрын
I'm sorry I don't, it's been awhile.
@great2c4me
7 жыл бұрын
How about that battery location? I don't have one already on my WR426 & want one
@alexisperez587
6 жыл бұрын
Hello friend, What regulator - rectifier did you put?
@frankiemarchese2978
4 жыл бұрын
Probably the stock one
@alexisperez587
4 жыл бұрын
@@frankiemarchese2978 could you tell me the brand?
@frankiemarchese2978
4 жыл бұрын
Yamaha. Just look on ebay and type in “wr426f regulator
@alexisperez587
4 жыл бұрын
@@frankiemarchese2978 Thank you very much, I have already done it and I get many models and my motorcycle has two cables in the regulator and the one I am looking for is 4 cables
@MountainManKm
3 жыл бұрын
Does the title say street use?
@nixfuckinbrx
9 жыл бұрын
how much did it all cost to convert ?
@andysabido2507
8 жыл бұрын
Close to 3k, and I did all the work.
@MrGutter46
9 жыл бұрын
How much to do a sumo set up
@UnRefinedHero
9 жыл бұрын
I just did one and i'm at about $1500 on the conversion
@andysabido2507
8 жыл бұрын
For just SuMo 1.2k-2k depending if you're getting Excel wheels or something cheaper. But for my whole Street Legal SuMo setup, around 3k.
@dutchoff-road8837
8 жыл бұрын
where did you buy the lock? or did you Make it yourself?
@andysabido2507
8 жыл бұрын
what lock?
@dutchoff-road8837
8 жыл бұрын
+Andy Sabido the ignition key
@andysabido2507
8 жыл бұрын
That's an ignition switch from a Yamaha DT175.
@JVIrSmith27
11 жыл бұрын
BHP?
@rbyrouthy
11 жыл бұрын
can I possibly install an electric start to mine?and where can I get it and who can hook it up?...the kick start is rly a bitch haha
@zakiyezdery8465
10 жыл бұрын
where did u get the back fender because the original is fucking ugly lol.
@kastelanoudi
11 жыл бұрын
Man... This is not a WRF... The oRiginal WRF, has no turn lights and brake lights or mirrors... ;-) And if you want the new fassion, go and buy the 2012 model... And don't change the mask!!!
@andysabido2507
11 жыл бұрын
Don't voice out your opinion if you don't know what you're talking about. Yamaha WRs have turn lights, brake lights, and mirrors cuz they're Dual-purpose bikes. Second, I can change whatever I want with this bike, cuz it's my f...ing bike. And lastly, check your f...ing spelling (fassion); cuz if you make "SMART ASS" comments and you're not really "SMART", then you're really just an "ASS"!
Пікірлер: 42