This is the 2006 Honda Accord Valve Adjustment. This is for the inline 4 cylinder, the V6 will be different. The first thing you need to do is remove the cylinder head cover. You can refer to our head cover gasket removal video. The crankshaft turns 180 degree clockwise (camshaft pulley turns 90 degree). You will have to turn the crank pulley when adjusting the valve clearance on each cylinder.
Tools:
amzn.to/2aJwRlZ 1/2 ratchet
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2aJy9kF 3/8 3" short extension set
amzn.to/2aEUQWZ 1/2 3" extension sets
amzn.to/2aY8Mfm 1/2 19mm deep socket
amzn.to/2aweq4t Pliers
amzn.to/2awfUvw Flat head screw driver
amzn.to/2bDDCaS Lisle 68050 Valve Feeler Gauge
amzn.to/2aYXnIy 3/8 10mm deep socket or the special tool
Parts:
None
Valve lash specs:
0.21-0.25 mm (0.008-0.010 in) - Intake
0.28-0.32 mm (0.011-0.013 in) - Exhaust
Torque specs:
14 ft. lbs - Intake locknut
10 ft. lbs - Exhaust locknut
Valve cover removal video
kzitem.info?o=U&vide...
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2
Intro: RavenProDesign
www.RavenProDesign.com
Music: Manic Bloom - Death and Conversation
/ manicbloom
Негізгі бет Автокөліктер мен көлік құралдары 2003-2007 Honda Accord Valve adjustments
Пікірлер: 163