I can feel how solid that is though the screen. Excellent job.
@superdutysteve6934
2 ай бұрын
Doing my first set of rockers on my 04 F-350 with the same cab next week. This video for sure helped with some of the nerves I’ve got about doing it. Although, i do have to replace a bit of the front section close to the fender as well as the floor support and ends. This video gave me the most detail and better idea of the job
@Trifiveguy
2 ай бұрын
Take ur time be patient and you’ll get it done right thanks for the compliment
@Trifiveguy
2 ай бұрын
How did it go ? Email me pics if you like fguzzo1@hotmail.com
@mckaye48
10 ай бұрын
This is the most helpful video I’ve seen on this topic for this truck. Thank you
@Trifiveguy
10 ай бұрын
Thanks for watching appreciate the comment cheers
@Trifiveguy
2 ай бұрын
Australian mate lol 😂
@earthsskin
2 ай бұрын
Thanks for the great video. Did not expect a British accent in this stereotypical New England premise 😂
@IronheadGarage
3 жыл бұрын
Looking good brother that was a lot of rust she's going to be like bran new👍
@MATTYANDSMOKE
2 жыл бұрын
Gr8 video man. Very thorough explanation step by step. Multiple measurements to be precise = nice even straight bodylines. Good video thanks chum.
@Trifiveguy
2 жыл бұрын
Thanks man I appreciate that!!
@MrRoberoni117
Жыл бұрын
Nice job - appreciate sharing with us. Nice to see the truck is still on the road too!!
@Trifiveguy
Жыл бұрын
Thanks very much I’m actually on my way to see it sold it to a guy picking up the 5th wheel cheers
@notajp
3 жыл бұрын
A job worth doing is worth doing right, and this is the right way to do a rocker replacement! Seen a lot of hack jobs on here. Seam sealer for body filler, spot welds and not full welds, even spakle for filler! Would love to have you do the drivers side rocker on our E450 shuttle bus/camper…..
@Trifiveguy
3 жыл бұрын
Thanks buddy I appreciate it ! Bring her down to Kentucky!!
@bwsgarage
3 жыл бұрын
Nice work brother, professional job!
@Trifiveguy
3 жыл бұрын
BW's Garage the man appreciate it
@brentmclovin9332
3 жыл бұрын
Looking good! Nice work!
@RustyZipper
3 жыл бұрын
Coming along quite nice!
@Trifiveguy
3 жыл бұрын
Sure is!
@nick7.398
3 жыл бұрын
Great job on that cams out beautiful
@Trifiveguy
3 жыл бұрын
Hey thanks I just did 2300 mile trip in it first one was 1100 Maine to Kentucky then Kentucky to Harrisburg PA where the waterpump let go and then when I got back to Kentucky the transfer case let go in my driveway couldn’t believe it
@johncalabria1607
3 жыл бұрын
Now that's a button down shirt I'd steal
@Trifiveguy
3 жыл бұрын
lol
@rildooliveira4037
Жыл бұрын
Parabens. Excellent. Jobs. Good Good
@Trifiveguy
Жыл бұрын
Appreciate it thanks for watching
@shanerich9233
3 жыл бұрын
How many pieces is the inner rocker panel? Thank you great job.
@Trifiveguy
3 жыл бұрын
It comes as one piece
@shanerich9233
3 жыл бұрын
Ok.where did you order it from???? Thank you.
@Trifiveguy
3 жыл бұрын
I just found the best price on eBay the all the same manufacturers just different vendor
@shanerich9233
3 жыл бұрын
Thank you very much. Great job!
@eliedaou6627
2 жыл бұрын
This is amazing, very thorough. thanks for mentioning inner cab corner because i just was clearing off the rust from my cab corner and was confused what i was looking at when i had the inner cab corner. no one mentions it. From start to finish, how long did this project take for you?
@Trifiveguy
2 жыл бұрын
Thanks man I appreciate it it took 3 day to remove and replace but I was only working on it a few hours each day so I reckon about 15 -18 hours each side thanks very much for watching
@jamesreed515
Жыл бұрын
After a little bit of digging. It appears that only the "super cab" trucks have an inner cab corner. The single cab and crew cab trucks do not.
@Trifiveguy
Жыл бұрын
@@jamesreed515 Chevy did a very similar thing with there cab corners too different parts for different models
@eliedaou6627
Жыл бұрын
@@Trifiveguy and @jamesreed515 Do you guys know what is the purpose of the inner cab corners? is it just to add more rigidity like the braces for the inner rocker panels? Thanks for this series though!! i bought all the sheet metal pieces off ebay like you did here but i also live in MA and winter started so it's way too cold to do this. I'll be doing it in the spring.
@Trifiveguy
Жыл бұрын
@@eliedaou6627 I lived in Maine for 21 years brutal winters lol , I’m actually gonna start back up on the truck paint the bed , bumpers sharpen it up a bit it’s probably done 600 miles since I’ve been down here !! the only reason I see for the inner cab corners is strength and also something else to rust out I guess lol !! Thanks for watching !!
@MLPirates
2 жыл бұрын
Where do you get your rockers from
@Trifiveguy
2 жыл бұрын
eBay There is various eBayers that sell the same rocker
Пікірлер: 39