Good video. Its -40 with windchill i started the sled and smoked out the garage so need to wait till it warms up.
@MyTimmy75
6 ай бұрын
A video you should do, Is a belt change without the clutch tool. Like for instance. If the tool hole is stripped :)
@mrplisken1100
Жыл бұрын
Thank You.
@mattandkatchristie2552
2 жыл бұрын
Great video thank you
@marcbrazzers
Жыл бұрын
When you say “rev the engine up to engage the clutch” you mean rev until the track spins right? If so, is that safe to do off the ground using a rear skidoo stand?
@bevestush
Жыл бұрын
It is safe enough. It just needs to spin enough to confirm the belt is settled in place. Just use your own judgement on what you’re comfortable with.
@rankor6110
7 ай бұрын
what is the width of the belt
@bevestush
7 ай бұрын
It is just a standard belt. It is the size recommended by skidoo on their parts page.
@aidanbelliveau7335
3 жыл бұрын
Just curious, is everything you showed in this video (belt adjustment/tightening the belt and the adjustment for loosening the secondary clutch) are they the same for a 2004 GSX 600 sdi?
@bevestush
3 жыл бұрын
We normally set all our sleds up this way, so I would presume the method would work for you. Try it out and see if you like it. You can always adjust differently afterward. 👍🏻
@aidanbelliveau7335
3 жыл бұрын
@@bevestush Thanks
@kodiakyamaha8688
2 жыл бұрын
I put a new gates belt on my 2005 mxz 600 ho and it was extreamly tight.i adjusted the belt to #0 on the adjuster and it still seems tight that it squealing and is trying to stall the engine.What may I be doing wrong here?
@bevestush
2 жыл бұрын
@@kodiakyamaha8688 Sounds like it may be an incorrect belt. Depending on the chassis, it may need a longer belt. I would refer to the Ski Doo website or a dealer to confirm.
@arvid_lind_0777
2 жыл бұрын
How do i adjust a belt on a ski doo 670-98 if it is slipping
@bevestush
2 жыл бұрын
I would first confirm it is the correct belt. You should be able to find this information on Ski Doo's parts information page on their website. Also, confirm the belt isn't too old and stretched. You should be able to search videos on the year/model machine as well for maintenance tips. Hope this helps.
@talonvaughn6175
4 жыл бұрын
Is the same for a 2000 mxz?
@bevestush
4 жыл бұрын
Talon Vaughn As far as I know, all rev chassis belts can be adjusted this way.
@Legend.Cam42
3 жыл бұрын
Well my snowmobile is a price of shit , I’ve watched so many videos on how to get it out and none of them work
Пікірлер: 19