Valve cover gasket replacement on our 2003 Tundra V8 4.7L engine.
This was so much easier to do than on our 2007 4Runner. So much less to take off the engine before even getting to the valve cover. Overall it was a pretty quick and simple process. If you're wondering about doing it yourself it's really not a hard project at all.
Took me maybe an hour a side. The tools I used for the valve cover gasket replacement were...
10mm socket and extensions to get all the bolts off. A wobble socket connector would be helpful.
torque wrench set to 109 inch pounds (9 foot pounds)
Knife or razor to scrape crud off the cover surface
Some parts cleaner and shop rags to clean the mating surfaces
Toyota FIPG (RTV sealant) for the corners and half moons
Felpro Valve cover gasket kit from Rock Auto (with spark plug tube caps and the replacement grommets (18 total))
Here's the link to one of my Amazon pages for some of the things I used in the video... amzn.to/41qJvQj
My other build links are here...
www.amazon.com...
I seem to make a few dollars a month when people purchase through clicking the links on these pages and I totally appreciate that.
Негізгі бет 2003 Toyota Tundra 4.7L V8 Valve Cover Gasket Replacement
Пікірлер: 12