DON'T FORGET TO SEAL THE LIGHTS!... These lights are notorious for leaking water into them. Then you get condensation on the inside of the light that eventually stains the plastic on the inside. Even the OEM from the dealer lights do this. Especially if the light set has been sitting in a warehouse for a few years drying out. Sealing is easily done by running a bead of silicone along the edge of the clear plastic. Plenty of KZitems showing how to do it. Great Vedio... THANKS
@Ubarin
5 жыл бұрын
This is so fucking stupid remove so many parts just to replace a damn broken light. Stupid Toyota
@LORDRA1DEN
6 жыл бұрын
There has to be an easier way to do this. It's weird Toyota would make it this hard. On my Focus it's two screws, that's it. This is just complicated for no good reason.
@SueCougar
7 жыл бұрын
Thank you so much for posting this video. I just finished installing one assembly and I'll do the other tomorrow. This 55yo lady is feeling very accomplished thanks to you! :)
@chrissargent8398
5 жыл бұрын
Will you marry me??
@SWSW560
5 жыл бұрын
I'm here in 2019 thank you for this video. I successfully pulled and replace headlamp on a 2007 Rav 4...cheers!
@joosh78
4 жыл бұрын
Thank you Tony, your a great guy for sharing. I just replaced both sides on my 2008 Rav4. Your video saved frustration finding bolts. Removing the fender bolts also makes a huge difference. I removed both and it gave me a lot of play to get the old assembly out and the new in. FYI the shop would have charged around $100 for something you can do yourself. Merry Christmas and Happy New Year!
@jas350
Жыл бұрын
Lier you don't need to remove the plastic fender.
@toothybj
5 жыл бұрын
I was replacing the headlight bulbs (to LED) on my wife’s 2004 RAV4 and the little metal piece that holds the bulb clip & that round light guard/diffuser broke...ugggh So I guess I get to learn how to do this! Your video is going to make it a lot easier though.
@johnmsandoval8993
5 жыл бұрын
2008 Rav4 V6 4WD - Perfect instruction also... Brent Westbrook - ...taped up the front of the new headlight sides with wide masking tape to protect it from scratches during the install...
@mattmcintyre2169
6 жыл бұрын
This looks nothing like my 2005 set up.
@scottz9806
3 жыл бұрын
Dude, your video is a lifesaver! I feel like buying you a six pack! Thanks for the help!!
@johnfroude4507
4 жыл бұрын
Thank you for taking the time to do this video. I am considering replacing both housings on my 2008 RAV4.
@nomadchad8243
6 жыл бұрын
I have a 2012 and this was identical for my year also.
@mattack6779
2 жыл бұрын
Tony skips the part about removing the bottom cover which consists of 8 10mm bolts. Do not force the side valence without removing this piece. In fact just watch the video by TRQ instead of this one!
@mrgallardo7069
2 жыл бұрын
I got a 2005 rav4 almost mint condition I purchased a year ago and I was wondering if there ls a aftermarket halogen headlights I can install? That's the only thing that's making the suv look bad.
@gmyatko
6 жыл бұрын
so far, this isnt close to a 2004.
@tomconnor7667
4 жыл бұрын
Wish I had seen your accurate comment before I messed around with the headlights. Entire front bumper needs to be removed. In addition to the screws he mentioned, on the 2004 there is a plastic hinge underneath that holds the headlight in and can only be accessed with the bumper out of the way. Also be ready for plastic clips and retainers to break due to brittle plastics. Fortunately they can still be purchased online :)
@jasony724
Жыл бұрын
What kind of conspiracy crap is this? What happened to the east 2-3 bolts without tapping into any fenders?
@GeorgeRTurner
6 жыл бұрын
Thank you for taking the time to document the process :-)
@onedkg1
7 жыл бұрын
Thanks - very helpful! It was difficult getting the new assembly in, and I'm glad I covered the lens with tape so that it didn't get scratched.
@fjohngte
7 жыл бұрын
I scratched mine a little bit putting the assembly in, but not too bad.
@christopher1419
5 жыл бұрын
Wow Tony! I could not have found a better video for this. Great job all the way down to the "Push the fender in a little" comment.
@bodellg
6 жыл бұрын
Getting ready to do a swap on a 1997 Rav4, do you know if it's similar? Thanks..
@tumkurvijay1728
5 жыл бұрын
Thank you very much for the detailed video with perfect instructions that helped me great deal in changing out the driver side headlight assembly on my 2006 RAV4 V6 Limited. I had the passenger side headlight replaced by the Toyota dealer over three years ago (still in good shape) and I am happy that I have two matching headlights now without the frosty and worn out look on one side.
@emadalomary8467
6 жыл бұрын
Thank you very much for your detailed, and easy illustrated steps to replace the Rav4 2008 headlight - - Excellent Job!
@zavtang5134
7 жыл бұрын
Thank you for sharing! I'm gonna fix the headlight moisture following this instruction!
@lordszayel110
7 жыл бұрын
thanks soo much. this was a big help and saved me 500 bucks
@westy373
6 жыл бұрын
HIGHLY RECOMMEND- I took the second front quarter panel bolt out (13.5 inches away from the first bolt) closer to the windshield and it made the quarter panel flex out more making the job way easier. I also taped up the front of the new headlight sides with wide masking tape to protect it from scratches during the install.
@Xyzzzzzz1234
Жыл бұрын
That's not even close to doing a 05
@fjohngte
7 жыл бұрын
I don't think i would have found all the bolts without this video, thank you ! P.S. The bolt attaching the housing to my fender was not a 10 mm, it was smaller, I am not sure what size, I had to use a vise grip to get it off.
@AM_Mechanic
5 жыл бұрын
thank you so much very helpful
@DogbarkMusic
2 жыл бұрын
Great video, but only issue is there are several different types of "10mm bolts" and have to put back in the same location they came out of. I found this out the hard way.
@truepatriot8751
7 жыл бұрын
Great video. Really helped. Thanks
@DrZipZwan
3 жыл бұрын
I want to update light bulb of my Rav4 2005 model, but I do not know if I should order LED with CANBUS or Led without CANBUS. I mean light bulb of the headlights. Thx if there is Rav4 05 owner who could help me choose.
@DrZipZwan
2 жыл бұрын
@@kjhnsn7296 Indead, I also read about those interference with Radio... But I do not use Radio in car that much. Thx for the advice. Finally I went for Canbus one. It is installed and working fine for around 2 months in my Rav4 2005. Only downside, when I turn on the light, there is no signal on the main dashboard above the wheel, which use to tell you, headlight are On or not. Other than that, they are working fine. PS: I went with 8000K, because above, light become very blue...
@DrZipZwan
2 жыл бұрын
@@kjhnsn7296 Even during day light, you may turn on headlight, and see if on dashboard it notify Light On or Off. I guess because electro present in Canbus model are made to work and communicate with computer/ central unit, they are using nowadays in cars... other than that, they work pretty well. PS: I choose the model with heatsink + little fan for better cooling, hope it helps, for them to last as much as possible )) But damn they for not easy to install, due to little place between back of headlight, and the rest component of the motor..... This video was helpful, explain well for lambda user, and stuff shown in video also... kzitem.info/news/bejne/to-EsGhqaatmfoI
@DrZipZwan
2 жыл бұрын
@@kjhnsn7296 nice news, probably because it is a 2007 model you got. Anyway I am kind of used already to no light indicator lol Most important is light when driving at night, :)
@edzanjero353
3 жыл бұрын
You're lucky to have purchased the V6 model. Us 4 cylinder owners got the crap engines...the 2AZ-FE. Had no idea til after purchase. Note: always smart to seal your new assembly with a silicone bead at the joint of the glass and plastic. ** I just spent a few hours replacing one assembly...doing the other tomorrow. I've being doing simple to difficult car repairs for years, and this was an MF'er. VERY TIGHT FIT. Yes, the fender must be loosened considerably to get clearance for the edge of the assembly to get past it...because the other side under the front cosmetic plastic has to clear a part of the support frame. A real bugger!!!
@brokenlegz
6 жыл бұрын
Thank you. Saves me figuring it out
@jackripba
7 жыл бұрын
thank you for up load this video it help me a lot !!
@sonjaa26
3 жыл бұрын
Thx for skipping how to disassemble the piece & jumping straight to putting it back in
@miltonavila6435
3 жыл бұрын
would a 2003 bumper filler fit for the 2004? if not why? I'm trying to get a part for my '04 rav4.
@philipdutton9831
4 жыл бұрын
Thanks Tony. Your procedure worked on my 2007 RAV4 Sport. The Sport uses a slightly different (sportier?) part # than the Base and Limited models but your video helped me immensely to get it done.
@1sotheary
3 жыл бұрын
I’m assuming you have to calibrate the new light.
@Djstormxz
4 жыл бұрын
Were the headlight beams already adjusted or did u have to adjust them to spec?
@anonymoussources8803
3 жыл бұрын
I have a 2005 Toyota Rav 4 and your vehicle is significantly different.
@DrZipZwan
3 жыл бұрын
True, it is a 2006/2007 model
@stinkwink695
5 жыл бұрын
Totally different on a 2005 limited
@isaacperez834
3 жыл бұрын
Thanks Sir
@redudley1172
5 жыл бұрын
Why the stupid music!
@macmanjimmy69
6 жыл бұрын
Having issues removing the front turn signal bulb, I am assuming you had to transfer the bulb over to the replacement headlight assembly..How is it done... Tried turning it counterclockwise, but won't give... Any info? Thank you
Пікірлер: 54