Shop this Rough Country Lift Kit: amtrucks.at/2IoETaR Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
@Itsaustinfromboston
3 жыл бұрын
I just wanted to say I was so grateful for this channels in depth detail to jobs done. I installed the belltech 3/5 drop to my 13’ supercrew and literally watched the video a 100 times through the whole process folllwing along. Some minor details left aside but other then that was phenomenal to have a follow to video so thanks y’all.
@benson2873
3 ай бұрын
I’m just going to remove the sway bar link with the axle still in and have someone else or use a jack to hold everything up.
@TonyShawHouston
2 жыл бұрын
Drink when she says "grab", drink twice when she says "grab your nut(s)". We got wasted and had to finish the install the next morning
@volvoripr9980
Жыл бұрын
what I removed both upper bolt joins lower and upper struts bolt and nuts and bingo, they key is to do both sides so the lower control arms and sway bar gives you slack to fit the new struts and spacers , dont take off anything that does need to be removed
@oneal2003
3 ай бұрын
Is there like longer struts if so put part number please I remember some one did it I forgot who tho
@acuraonly
9 ай бұрын
amazing video thank you!
@americantrucks
9 ай бұрын
Thanks for watching! -Zach
@Soycochodeguerrero
Жыл бұрын
You know you didn’t have to actually remove lots of crap to add spacers right?
@mcs4189
8 ай бұрын
I was saying the same thing myself. Half of the stuff didn’t need to be removed 🤦🏾♂️🤦🏾♂️
@papasmrff2291
3 ай бұрын
Just the outer tie rod and upper arm balljoint and the strut will come out just fine
@J-Ball
3 жыл бұрын
That seems like some harsh angles with the UCA and ball joint. Would I need to upgrade my upper control arms for this kit?
@tommyweese5697
2 жыл бұрын
I would highly recommend it
@Cooptech
Жыл бұрын
@@tommyweese5697 Can you get away with stock UCA for road driving? I want tires to wear evenly after the alignment
@tommyweese5697
Жыл бұрын
@@Cooptech the stock ones even with an alignment are gonna be pushing it at 2.5. So yes you can get away with it for I don’t really recommend it
@amoncopeland6747
Жыл бұрын
The angles are stupid harsh. Soo much so you can't get it back together. The axle shaft and control arm binds up on you
@dj_adelo0o
Жыл бұрын
Why is there no shipping to the Arabian Gulf?
@ryanmac1917
3 жыл бұрын
What are the specs on the 33” wheels & tires? 33x12.5x18? Offset?
@FinanceMan
3 жыл бұрын
Hey guys, I know this is random but I can’t find an email to contact you. I’m looking for 2019 f150 led light to replace the halogen. I think you have morimotto led lights but I don’t want tinted lights, is there a clear option? Sorry if I spelled the name incorrectly.
@edwinmorales4909
Жыл бұрын
Am I suppose to remove those two nuts on top of spring to get this to seperate ??? Mines isn’t lowering like yours is
@americantrucks
Жыл бұрын
There should be 3 nuts on the upper strut perch that need to be removed to lower the strut down.
@amoncopeland6747
Жыл бұрын
Yea I tried this like 4 times. After the spacer was in nothing would go back together. The upper control arm bound up on the coil. Truck would not lower
@DarkShadowsReviews
11 ай бұрын
I recommend when doing any lift changing your upper control arms with a 2 to 4 inch lift upper control arm.
@michealbiggers9873
6 ай бұрын
I got to be honest you took extra steps that was not needed just take the bolt out the top control arm and the tie rod and you can move the knuckle any which way you need it
@ChristianMiller-ce4jc
8 күн бұрын
Why so many extra unnecessary steps ? Id leave the axles in for sure
@skupautpomorskiezagotowke9241
Жыл бұрын
widać ze śruby były wcześniej odkręcane tak pani by w portki narobila😀
@amoncopeland6747
Жыл бұрын
It just doesn't work. It does. The rear is fine. But I bought this kit and the pieces are still sitting around...this kit DOES NOT WORK.
@adamfair6435
Ай бұрын
Literally only have to remove tire rod bolt to take spring out bad video anyone trying to do this job
@GaryCrouch-q2i
Ай бұрын
As my old man would say........lady, you just went around yo a$$ to get to your elbow. 3/4 of the information in this video is not necessary. If you have to take the calibers off to install your leveling kit.........you have no idea what you're doing. We just taken it loose to take loose.
Пікірлер: 30