Thanks for the video man. Now I have a hope of fixing my top. I managed to open the top using your method and can access the motors.
@350zmurray
Жыл бұрын
Now we just need to figure out the timing of the cable with the closing mechanism. Now I'm back to the 2 inch gap. I suspect i've ruined one of the switches from jamming screw drivers through that hole over the back glove boxes.
@skyline263
10 ай бұрын
@@350zmurrayI have managed to replace the motors inside the tonneau cover and took a picture of cable length. If this would be helpful, I can share the pic.
@350zmurray
10 ай бұрын
@@skyline263 please and thank you
@skyline263
10 ай бұрын
@@350zmurray do you have an email?
@350zmurray
10 ай бұрын
@@skyline263 yes shoot me yours and ilk hit you up
@davidmunguia521
Жыл бұрын
So update us, has anyone had luck fixing their problem? I’ve currently manage to close it but now I can’t get it opened lol
@vampywargod_8628
10 ай бұрын
Well I found an easier way have someone pull on The back of the top while u open and it will unlock
@basselbekdache2663
10 ай бұрын
The standard way to open is in the trunk, remove panels from the back, expose the hatch unlock cables, and the two motors on the side of the trunk. Pull on the cable that unlocked the hatch, then torque wrench on both motors , turning counter-clockwise , to open the hatch. White Grease all the top roof joints, motors, and cables at friction to make opening easier.
@350zmurray
10 ай бұрын
There is -0- access to the top from the trunk. The issue is the prong from the top wont release. The two cables you are talking about are to release the cover AFTER the prong has been released.
@basselbekdache2663
10 ай бұрын
@@350zmurray True! The prong mount can be unscrewed from where the 5th bow motor. It is not easy though.
@grindycortez904
3 ай бұрын
Hey I just saw the recent video you posted I need the same part if you ever find one I will buy it!!!
@350zmurray
Жыл бұрын
At 7:23ish younwill see the holes where the 10mm (I think) bolts are. There's 4 for the latching and 3 for the motor. You have to disconnect all the cables and connectors. You have to undo all of that then you can wiggle the latch mechanism out. It's a B!!!!! But some vigorous wiggling will get it out.
@davidmunguia521
Жыл бұрын
Got it! Have you been able to give the bulletin service a try? I know I recommend that you gave it a try. Let me know if it ended up working for you
@davidmunguia521
Жыл бұрын
Not sure if the comment was ever posted on the other video, I found a link on a forum page that told us to reset/retract the wire from the motor 1.5”/2” when reset. Not sure if that makes sense
@350zmurray
Жыл бұрын
@@davidmunguia521 it does, and I'm sure the latch reciever needs to be in the open position
@renthalcoleman9699
Жыл бұрын
@@350zmurray the clicking you here in the back is the button you press to let the top down it releases that hook in the back that black cable in the back pushes forward and release to pull down hook if the tips are broke on the table it will just click Nissan do not sell the cable anymore it has been discontinued
@renthalcoleman9699
Жыл бұрын
@@davidmunguia521 did you solve the problem you was having
@davidmunguia521
Жыл бұрын
How did you manage taking out the latch system and the motor
@Marco1973est
2 ай бұрын
Thank you for the video brother . Question can that motor just be replaced and then everything is back to normal ?
@350zmurray
2 ай бұрын
I can't say that, you may still need to replace the 5th bow motor
@Marco1973est
2 ай бұрын
Yeah that seems to be the major consensus.......most likely ...whatever- always something - but thanks nonetheless
@vampywargod_8628
10 ай бұрын
How do u even get the latch from unstuck is there an easier way?
@georgef.stoweiii1596
Жыл бұрын
Good job, Brotha; however, you did not show us where you got those 2 parts from...and how did you access those parts? What's the proper name of the "motor? What tools did you need to access those parts ( hacksaw) and then you said, this part is clearly missing a spring...from where? When is part two, to this video, going to be released?
@350zmurray
Жыл бұрын
kzitem.info/news/bejne/2Yhun6ajhV-mpGk
@350zmurray
Жыл бұрын
Those parts are in the roof cover. There's a bunch of videos on that but there were no videos on how to get the back window to go up if its stuck down. So I just provided how to force it up. 5TH Bow Motor is the part with the cable and Lock Assembly these parts can be found in the storage lid. No hacksaw needed haha
@renthalcoleman9699
Жыл бұрын
I'm having the same problem after you pry the top open did you have to replace the locking mechanism and how is the top working now
@350zmurray
Жыл бұрын
So now it opens I'm back to the little gap when closing this issue of the gap is the deal is laching BEFORE the striker can get there. There's a comment that tells us how to time the cable. I think it needs to be about an inch and a half out in the Open position.
@renthalcoleman9699
Жыл бұрын
@@350zmurray the problem is that little black wire cable that runs in the same area the end with the cable secures itself are broken period mine is broke on both ends. I did not pry mine open I took this 3 flat head screws out of the hook that will not let go then I went inside the Box and push that black cable and it fell out the problem is when you press that button inside the car the cable pushes on the locking mechanism and releases the lock. Next problem is Nissan do not sell those cables anymore and they are very hard to find. I think I may have found a cable, I'm waiting on them to ship it now they say they can find it but it hasn't happened as of now
@davidmunguia521
Жыл бұрын
@@renthalcoleman9699 I noticed mine was broken too. As of right now my top is closed with no gap but now the top doesn’t open and is the exact issue from the video
@davidmunguia521
Жыл бұрын
@@renthalcoleman9699 where did you find that cable?
@renthalcoleman9699
Жыл бұрын
@@davidmunguia521 I found it at a place called turbomotors sound like some Indian people I ordered and paid for it they supposed to send me a email once it ship they say they can get more than just that cable but I'm not sure if they can even get it
Пікірлер: 39