Great vid - thank you for posting. One comment, I would have slathered anti-seize over every bolt. I'm waiting to hear back from my mechanic on my 2007 as it looks like the rear sub frame rotted out where the alignment bolts are located. If I had room and time, this video would give me the confidence to tackle it myself!
@davidreed1000video
7 ай бұрын
Hey Jeff, great video - I'm getting ready for the same job on my 2013 Armada so this was a big help. I also appreciate how you didn't edit out some of the struggles you went through, helps set my expectations. How much better does she drive now?
@ahmedibraheem7519
2 ай бұрын
Thank you very much for your video,heavy work done.
@valm8090
2 жыл бұрын
I'm about to change both my rear lower control arms, shocks and sway bar links, on my 2008 Pathfinder (sucks they don't sell just the ball joints for 2008 Pathfinder rear lower ball joints.. you need buy the entire control arm.. at least you get new bushings) Thanks for the vid !
@daneandersen1553
3 жыл бұрын
Very nice job on video was extremely helpful for my rear suspension rebuild on my old rusty 2005 pathfinder definetely a fun project to diy and save some money on labor I cut a arms n used a cut off wheel w 4 1/2" angle grinder n it made quick work compared sawzal I seemed to have trouble with just for words of advice otherwise great video! -Dan
@mrgmc6314
7 ай бұрын
I totally missed what shock you went with ... the air ride on mine is blown out and the truck has way to much camber i need to swap it out asap ..
@abdullahalghafri8990
4 жыл бұрын
Thanks for the video, great hard work. it would be better if you have cleaned the rust using W40 for example.
@paulvivao8330
4 жыл бұрын
Thank you for the video very helpful...God bless you
@antoniobanderas6331
5 жыл бұрын
I felt your frustration with the parking brake assembly. Sometimes i wish we had three hands instead of two.
@paxtonjohnson2552
4 жыл бұрын
Wanted to know which parts were bought at the dealer vs after market
@axclusiventerprise2090
3 жыл бұрын
Thats why needle nose was invented
@clos8819
3 жыл бұрын
Where did you get all new rear control arm bolts ?
@jeffkraus1753
2 жыл бұрын
In the past I would use Menards 10.9 metric bolts for some jobs and also boltdepot.com for others, but most of the control arm work I bought the bolts from the dealership (I think bolts alone were around $500 if you could believe it). First I went to parts.nissanusa.com and figured out the bolt part numbers and quantities.
@mrgmc6314
7 ай бұрын
I dont own a torque wrench unfortunately i just use ugga duggas
Пікірлер: 14