got it done $2200 local mechanic! Kennett Square PA. So Happy!!
@encinobalboa
10 ай бұрын
I changed the booster motor and accumulator in my 2003 4Runner for $65 with a pull from a 2004 Lexus GS300.
@eltravieso2136
6 ай бұрын
@@encinobalboaWe're your brakes feeling locked up too? And the booster fixed that?
@encinobalboa
6 ай бұрын
@@eltravieso2136 Brakes did not lose power. It was bearing noise in the motor.
@encinobalboa
6 ай бұрын
@@eltravieso2136 When pump motor fails, system reverts to manual operation so brake pedal will be very hard. (Soft pedal is accumulator or m/c seal failure.)
@eltravieso2136
6 ай бұрын
@@encinobalboaOh Alright, thank you
@DakhilB
Жыл бұрын
If The Brake Pedal Is Hard Rock Then It's Your Brake Master Cylinder But For The Old Ones it's Just The Brake Booster... Or Something Like That
@edgaranma23
2 ай бұрын
Did you replace any part of the breke booster just before the noise came up or it just happened out of nowhere?
@grahamewing4230
2 ай бұрын
brake lines. didn't properly bleed at booster
@edgaranma23
2 ай бұрын
I have the same problema with my 2003 4runner,l have done the bleeding procedure several time but the noise doesn't stop,did you bleed the master cylinder right under ?
@homeSchool-zp3gy
Жыл бұрын
which noise did the bled fix? the high pitch sound or the rasky one?
@grahamewing4230
Ай бұрын
Both
@mytube3687
Жыл бұрын
I have got rav4 2007 , when I apply brake sometime ( mostly on rough road) it make funny noise and I can feel vibrations on my leg. The brake are working fine.I have replace the master cylinder and bleed the air twice now but still the same problem.
@grahamewing4230
Жыл бұрын
It's not the abs kicking in?
@mytube3687
Жыл бұрын
@@grahamewing4230 I am not sure that why I am asking I need to repair.
@grahamewing4230
Жыл бұрын
When ABS is working properly, the driver may feel the brake pedal suddenly drop, followed by a rapid pulsing sensation. There may be a grinding or buzzing noise coming from the vehicle during the period ABS is activated. It may also feel like the brake pedal is pushing back when ABS activates. mycardoeswhat.org/breaking-anti-lock-brakes/#:~:text=When%20ABS%20is%20working%20properly,pushing%20back%20when%20ABS%20activates. @@mytube3687
@mytube3687
Жыл бұрын
@@grahamewing4230 thank you , I appreciate your help .I will inspect again , the information you provided will help me a lot . Thanks .
@encinobalboa
10 ай бұрын
Does it sound like a small motor is running at the same time you feel vibration through the brake pedal? If so, that could be normal if motor does not run excessively and vibration is not severe.
@ElGajos
Жыл бұрын
Hi, I have the same issue after brake fluid replacement. Hope second bled will helps.
@grahamewing4230
Жыл бұрын
It should! Bleed at the master!
@ElGajos
Жыл бұрын
@@grahamewing4230 unfortunately it didn't help in my case. I think I must replace pump.
@edgaranma23
2 ай бұрын
I do have the same problema with my 2003 4runner previous owner replaced the brake booster module,brakes works fine but the beep and grinding noise is there every often.
@lindajayneclark767
Жыл бұрын
Toyota dealer wants $3200 to fix it. The whole ABS brake system. Doesn’t seem to be any way around it. I have the same problem Brakes work fine I just can’t stand the noise
@grahamewing4230
Жыл бұрын
I was told that also. Just bled them myself.
@SkinnySkinch
Жыл бұрын
@@grahamewing4230 Did that fix it?
@grahamewing4230
Жыл бұрын
@@SkinnySkinch yep i did them all kzitem.info/news/bejne/q4Nrp2yGp5yEan4
@homeSchool-zp3gy
Жыл бұрын
@@grahamewing4230 will the bleed alone fix the high pictch beeping noise?
@grahamewing4230
Жыл бұрын
@@homeSchool-zp3gy It did for me.....
@Grantman787
2 жыл бұрын
What was the issue. I have the same problem!?
@grahamewing4230
2 жыл бұрын
I believe it was air in the system. We bled it at the master and hasn't done it since
@ImaginaryHouse
2 жыл бұрын
@@grahamewing4230 where can I see how to bleed it at the master like you did? Thanks
@byronruizruiz5110
Жыл бұрын
So,where is the solution??
@grahamewing4230
Ай бұрын
In the comments... I didn't know when it got posted
@fugitivoblanco3168
2 жыл бұрын
Como lo soluciono
@sevan5750
2 жыл бұрын
What part is the problem exactly ?
@grahamewing4230
2 жыл бұрын
Believe it or not, it needed bled properly at the master
@sevan5750
2 жыл бұрын
@@grahamewing4230 thank you so much for answering,, you mean there was an air in the system?
@grahamewing4230
2 жыл бұрын
@@sevan5750 I believe so....air came out!
@sevan5750
2 жыл бұрын
@@grahamewing4230 did you change part or you just service and fixed it ?
@lin018
Жыл бұрын
It's toyota asking for your $ on ABS pump motor.
@grahamewing4230
Жыл бұрын
It just needed bled!
@lin018
Жыл бұрын
@@grahamewing4230 It's an easy fix. Mine was asking for new pump motor but it sounded like that 2. Maybe my mechanic wasn't honest w/ me.
@grahamewing4230
Жыл бұрын
Mine didn't figure it out either....we did though
@grahamewing4230
Жыл бұрын
here is the bleed video i used. i did all the lines at the master though..... kzitem.info/news/bejne/q4Nrp2yGp5yEan4
@velocity800
Ай бұрын
you went open the hood but you did not do anything not even touch the wires ,, useless!
@grahamewing4230
Ай бұрын
It wasn't meant to be a fix it video, but the answer is in the comments! You're welcome! All better!
Пікірлер: 54