You keep finding at of these cherry hardly ridden stock bikes I HATE YOU lol. Makes life a whole lot easier.
@stihlms
Жыл бұрын
Nothing beats oem plastic. We try to use oem everything on our bikes.
@Jamo29
Жыл бұрын
Legit talent right there!! Bike looks amazing, super clean 👌🏻 Love the cookie cutter Factory Yamaha look of yesteryear mixed with trick parts 😍
@MANBEARPIG111
Жыл бұрын
I have a super clean 04 yz250 i cant wait to build it out a little more.
@MotoScrub
Жыл бұрын
Thats awesome, make sure to share so we can all see! 😁
@rickystephens7253
Жыл бұрын
All around awesome job bro!💯
@dougbotha8768
4 ай бұрын
Good looking bike.
@zachliter619
Жыл бұрын
You make me want to learn more on suspension work. It one of my least favorite things to during my builds.
@TheSlim93gt
9 ай бұрын
Im glad to see a Chad Reed replica. Tired of all the cookie cutter McGrath look a likes. I've always wanted to do a Doug Henry works 4 stroke (white plastic, red graphics, AL tank) but with a 2 stroke. Kind of a middle finger to what that bike started.
@AbcAbc-ox6pg
Жыл бұрын
I have the same bike, I restored it to 100% OEM new condition, it took me one year of work.
@MotoScrub
Жыл бұрын
That's awesome, lets see it!! I'm sure everyone would enjoy looking at a nice OEM build 😁
@badboycash1
Жыл бұрын
You started with a super clean bike to start with out of someone's collection no doubt nice build tho you finished it well
@TNTMOTO
Жыл бұрын
Nice build. Very clean look.
@bielbills
Жыл бұрын
Outstanding work! What a beauty!!! You need an Andreani vacuum suspension pump to proper bleed the air from the rear shock to avoid hydraulic cavitation.
@andymclain2574
Жыл бұрын
Dayum! U gotta do this to my 1994 Cr250🤘 badly
@73rlight
Жыл бұрын
Great videos! Please keep them coming.
@birel_dd2
Жыл бұрын
Top work Scrub 👌👏💎
@mikedillon3119
Жыл бұрын
very classy and period correct looking refresh nice 👍🏿
@MotoScrub
Жыл бұрын
Appreciate that! That era was too good looking to mess with it 👍🏻🤘🏻
@TWITCH772
4 ай бұрын
Hi, I am amazed at the results you get in the parts washer. Looks as good as ultrasonic cleaner. Do you have a solvent you recommend?
@Thepianobird
Жыл бұрын
I have to say you have a nice taste in mods. Especially the Race Tech gold valves and PC head work.... The only thing I might have done more is some gear micro polishing and cryo treating. And some Ti hardware, but it looks like you might have some already.
@leandromilanezsoares2798
Жыл бұрын
Muito top ai sim parabéns
@nickwukmir9853
Жыл бұрын
Last of the good frames.
@Goffens
5 ай бұрын
Great build but were can i get my hands on GYTR top triple clamp for my 2004 do you have a part number?
@Haljo
Жыл бұрын
Where did you learn all this? Dude you are amazing!!
@msoto951
Ай бұрын
Did Pro Circuit re plate the cylinder for you?
@ishy5462
5 ай бұрын
What foot pegs were the new ones?
@dustinrichards8401
Жыл бұрын
Clean!!
@zsoltpolgar5867
Жыл бұрын
Nice job...
@MotoScrub
Жыл бұрын
Thanks!
@positivecarry07
Жыл бұрын
Yo Moto Scrub - Maybe you can ask your followers if they have a 98 or 99 YZ250 for sale? I’d love to see a McGrath tribute.
@joaopaulocordeiro6954
Жыл бұрын
Befora was a museum/ colection pieace
@DanielRuiz-cr6gq
3 ай бұрын
Buena reconstrucción pero la has desgraciado quitandole el manillar original una pena...
@justinkimball1399
Жыл бұрын
is it for sale and if so how much
@juicedelco
Жыл бұрын
What's the ball park on somthing like this?
@Thepianobird
9 ай бұрын
you can build that bike for 4 or 5 grand. Im doing one right now. I got about 35 sank into it.
@juicedelco
Жыл бұрын
What ratio did you run? Looked really lean, unless it wasn't 5gal.
@rclmxshift
Жыл бұрын
When you add the gold valve to the rear shock, are you shimming it to the stock spec? Bike turned out sick looking.
@MotoScrub
Жыл бұрын
Both the fork and shock were revalved while installing the Gold Valves 👍🏻
@GavinBose
Жыл бұрын
Where did you get your subframe bolts?
@MotoScrub
Жыл бұрын
The top portion of subframe is the OEM bolt. The two lower bolts are from "Bolt Hardware". 👍🏻
@GavinBose
Жыл бұрын
@@MotoScrub thank you
@cristinegutierrez9893
Жыл бұрын
Want that so bad 😭😭
@johnbecker5213
11 ай бұрын
this makes me think about how much better Mcgrath is than reed.
@MotoScrub
10 ай бұрын
Thanks! ❤️
@Logan-tf6nk
Жыл бұрын
Sweet build! I'm curious how you do these types of builds all the time. Are these for yourself or customers. Keep up the good work!
@MotoScrub
Жыл бұрын
Thanks! They are customers bikes besides the 2006 RM125 an 2004 KX125 ^^
@bump2007
Жыл бұрын
Nice build. Where did you get the fork guards? I ordered a set from them over a year ago and still havent received them.
@MotoScrub
Жыл бұрын
All the parts were given to me by the customer but I believe they were purchased directly from Lightspeed...
@robertwaynereoo3636
Жыл бұрын
If you don’t mind me asking mate, what jetting specs do you have? And how many turns out is your airfuel screw? Plz
@MotoScrub
Жыл бұрын
Used the jetting specs directly from Pro Circuits website. Main 175 Pilot 48 Stock Needle (N3EJ) Needle Position 2 Air Screw 1 Good luck! 🤘🏻
@robertwaynereoo3636
Жыл бұрын
@@MotoScrub cheers mate thank you so much do you mind if I asked what fuel ratio you running it at? Please
@whiteman3075
Жыл бұрын
Ryan’s bikes are coming out sweet! I just bought a pro circuit 250 top end off him today.He told me about this channel and I’m now binging on these builds. Most people don’t realize the man hours this takes. Iv done my own and can tell you it’s cheaper to buy a new bike a most causes but the labor of love is what you do it for. Keep up the great videos Johnny.
@zoulou6700
Жыл бұрын
Good evening ! great video ! where did you buy the frame protectors and the carburettor hoses please?
@MotoScrub
Жыл бұрын
Frame protector - 3M brand, 4inch grey grip tape, purchased in big rolls. Then custom cut. Honda hoses - part number: 95003-07008-60M Good Luck! 👊🏻
@pedrofernando176
Жыл бұрын
✌👍🤙
@MotoScrub
Жыл бұрын
✌🏻🤙🏻
@StringTone-t6v
10 ай бұрын
Eliyte Indonesia ra mikir wong lugu lugu Indonesia dilibatke utekke ...oas kui elite utekke mbok kei senjata oersng karo irael cino pas podo ngeyel e soal e
@leandromilanezsoares2798
Жыл бұрын
Muito top ai sim parabéns
@ankrapek12
11 ай бұрын
you dude deserve more recognition, keep it up, people will eventualy share your amazing work!
Пікірлер: 63