Just got done changing the master cylinder on my son's 2005 Focus. Video helped a lot. I did find if I took out the air cleaner box that sits in front of the battery I could get to the bleeder from the top easier than from the bottom.
@thenault20
4 жыл бұрын
Just goes to show what a little commonsense and a "normal" person does for a video! BY FAR THE BEST TUTORIAL ON THE CLUTCH MASTER CYLINDER, GREAT JOB AND THX!
@chrsrans1
3 жыл бұрын
Just doing one of these myself and didn’t need to remove the bolt which goes through the centre of the master cylinder, I just removed the clip from the master cylinder and was able to remove it easily. I have also noticed that my clutch pedal has a lot of side to side movement so will be replacing the nylon bushing so that the link rod does not come off again and damage the new master cylinder. There is also a small clamp fitting available on eBay U.K. that fits on the end of shaft to prevent the plastic link coming off, You just put the fitting on the shaft and tighten up the grub screw. Hope this info helps somebody , thanks, Chris. U.K.
@kormoskormos
2 жыл бұрын
Pina la urma se da si pedala jos sau nu este nevoie????
@chillmode9576
3 жыл бұрын
great video, very clear instructions, well spoken, thanks for posting
@BigEightiesNewWave
4 жыл бұрын
Best demo on KZitem for this.
@digital4narchy101
4 жыл бұрын
Hey man great video really helpinf me. My biggest issue is with the clips on the hoses im trying to get those off right now
@zuranku
4 жыл бұрын
How do you replace them? I can't find them anywhere!!!
@henryrivera4353
Жыл бұрын
Para mi toda parte de Aqui
@O2zqjMVgaF
2 жыл бұрын
Very good video nicely done!
@xavierredden6425
3 жыл бұрын
Did it myself! Thank you very much
@ImSkirvy
2 жыл бұрын
Gonna try this tomorrow. Wish me luck ha
@stevegoldman4446
Жыл бұрын
Thanks for being thorough. Very helpful.
@garybanegas8639
4 жыл бұрын
About the clips that hold the hoses, is it difficult to clip them in??? is it easier to let them on the master cylinder in open position before to connect the hoses or better to take them off and clip them later. thanks for the video very didactic.
@busbuilduk1397
4 жыл бұрын
The brake lines push in and no need to remove the clips on new one just push and click
@esav7282
2 жыл бұрын
Great video!!! Thanks
@braydensdeals
4 жыл бұрын
Nice helpful video. Thanks
@pilioso83
Жыл бұрын
Please, show the procces to unplug the secure.
@autodiyertropicalnorth256
4 жыл бұрын
Hey thanks for the clip! I am trying to find a workaround for my 2010 focus clutch master cylinder. Question: Was it absolutely necessary to remove the center bolt which holds the master cylinder to the firewall OR could I ONLY remove the 'u' clip on the inside? My center bolt rusted out... hardly anything to grip! I was able to loosen all the other bolts on the inside but the center bolt wouldn't give! I aborted the mission as I did not want to snap anything inside and end up with bigger probs... Your insight will be appreciated!
@busbuilduk1397
4 жыл бұрын
No you dont need to remove that bolt just the clip
@isaiahnearhoof6725
3 жыл бұрын
I am having the issue with the leaking fluid when I push the clutch in but the clutch also becomes locked and unable to push in, is this the same fix?
@autodiyertropicalnorth256
4 жыл бұрын
further to my earlier comment; after you removed the entire thing - did you conclude that there was no need to remove the center bolt which holds the cylinder to the firewall. I am trying to find a workaround for my rusted out bolt head... Thanks.
@nick_the_potato3387
3 жыл бұрын
Same did you find a solution
@shanejoseph1700
3 ай бұрын
I hope this is all thats wrong with my car i was at a red light went to let the clutch out and it wouldn't do nothing and fluid started pouring in my floor
@justinbenson9704
4 жыл бұрын
Would have never found this, I was about to try bleeding it through the up stream line connecting through the fire wall.
@kormoskormos
2 жыл бұрын
Salut ,ai dat jos pedala pina la urma ???sau nu a trebuit sa dai jos pedala????
@kormoskormos
2 жыл бұрын
Nu curge la pompa dar nu se mai intareste pedala cum era mai demult am schimbat set ambreaj dar cind am aerisit sa intarit un pic dar nu suficient si intreb daca ma poate ajuta cineva daca schimb si pompa de ambreaj trebuie dat jos pedala sau se poate schimba fars sa dai pedala
Пікірлер: 28