This video fixed my ‘03 Infiniti I35! God Bless you sir.
@kennyadriankc
17 күн бұрын
Thank you glad I could help
@leonbayagbag7683
Ай бұрын
This fix my problem thank you 🙏🙏🙏
@kennyadriankc
Ай бұрын
Glad it helped
@rgaleas5663
Жыл бұрын
I have a I35 2003 and the spacer broke on the gas pedal the broken spacer is green, I was unable to find a green one, so I purchased a clear one. I removed the gas pedal, installed the new spacer and the spacer seems to fit correctly however, now when I shift the car is making a louder noise and it is not idling. It is at 3 rpm. Any suggestions? Thank you so much for posting this video.
@Big1MS
13 күн бұрын
Hello, thank you very much it fixed my problem but I it keeps coming while I drive it the gas pedal keeps stopping than I have to reset the pedal every time. Do you know what is issue!?
@kennyadriankc
12 күн бұрын
Well you need to read the codes , the spacer better if you get one from the dealer or oem , it may need to be reset and calibrate with a scanner
@OM4Rx
Жыл бұрын
Had the same problem! First it was my clutch pedal one I am hanged that one quickly with a Xbox joystick. But now this one I can’t reach it as easy cus it’s the gas peda this time
@kennyadriankc
Жыл бұрын
Yes you have to take the pedal assembly out to be able to put something in there but it has to be the same high of the plastic stopper that it's there if not the pedal reads different and keeps the car in limp mode.
@OM4Rx
Жыл бұрын
@@kennyadriankc I put it in and it seems fine for the moment but I hope the bumpy roads don’t pop it out of place! It’s working fine atm but yeah gonna order the oem part soon
@ghostron5012
11 ай бұрын
I have the same issue what’s the size on the bolt that u used as a alternative
@kennyadriankc
11 ай бұрын
Hello the main problem is that it has to be the same high as the plastic rubber that was in place that's all , that way the sensor stays within oem spec and then you can do a relearn so that idle works and when applying the gas
@austinbradley3411
2 ай бұрын
What size bolt? Can't find my old one it broke in very small pieces.
@XxIcybluexX
5 күн бұрын
For me I had cam position sensor bank a issue and my heat wouldn't turn off. 1 morning it just stopped giving throttle. I replaced tps and throttle body with the valve covers. Now I'm done won't start I'm getting full and spark but the throttle body won't move sticking the pedal down. I mind you give torn the engine down 8 times now but this time the engine is refusing to start. I'm wondering wheres the disconnect.
@kennyadriankc
4 күн бұрын
Well if I where you ill check my grounds first, then move to the gas pedal see if it has the space in there then you need to do a throttle body reset so that it's sincronice with the gas pedal , if not it will not know what to do.
@XxIcybluexX
4 күн бұрын
@@kennyadriankc I'm wondering if the throttle relearn I have to do is all 3 procedures or just force it to learn with a obd. I took the intake hose off to see the butterfly valve and stick the pedal to the ground with a scraper and chair it is still in the closed position. I would assume when starting the valve opens alittle to have are in the chambers.
@kennyadriankc
3 күн бұрын
@XxIcybluexX the air that needs to run its very minimum, you may not see it move, but make sure you do a relearn if not it will not work.
@XxIcybluexX
3 күн бұрын
@@kennyadriankc I've been pulling my resources and got a technician to send me some pdf to check the cam position sensor he thinks why it won't start is that. Also brought up the grounds you also were talking about. So I'm going to get some of my tools at work to help me do the tests hopefully it's not the time and just a bad ground.
@gregr1578
2 ай бұрын
lmao, thought i was having this problem. check the relay and the box is making sizzling noises like a damn grill cooking steak. turns out fuse box got wet from the 4 day rain storm and all the water splashing up into the fuse box. dried it all off and everything started working again
@kennyadriankc
2 ай бұрын
Lol frying eggs, glad you found it.
@user-ds1gp2ug2i
4 ай бұрын
Tanks Friends
@kennyadriankc
4 ай бұрын
Glad I could help
@dominiquerolle1734
Жыл бұрын
I did this fix before but know getting p2138
@kennyadriankc
Жыл бұрын
Hello so the spacer has to be about the same thickness of the one that broke of then you have to reset the throttle body to do a relearn so that it will idle again. Press gas pedal then open key to last step , wait about 20sec close the ignition then release gas pedal wait a minute and try starting the car. See if it will idle
Пікірлер: 25