Here's an oil change video for a 2006 Volkswagen Passat 2.0T FSI. This video shows the entire oil change process: lifting the car, draining oil, prepping new parts and filling/check the oil. Works for all model years of the VW Passat B6 generation (2006, 2007, 2008, 2009, 2010, and 2011). This video is a definitive and comprehensive guide for how to change oil for a Volkswagen Passat. I believe this 2006 B6 Passat is the EA113 engine. The Passat switched to the EA888 engine found in Volkswagen GTI cars in 2008 and up.
Some links below are affiliate links. The links are no additional cost to you and help me create more videos like this for KZitem. Additionally, if you'd like to support the channel: please give it a like and subscribe with one-click here / @mldiy .
If you purchase anything because of this video, let me know with a comment below to let me know my video was helpful. Thank you!
00:00 Introduction and Prep
01:16 Find Jack points and jack stand locations
03:11 Locate filter filter and drain plug
05:51 Prepare new oil filter
08:28 Replace Drain Plug
09:40 Replace oil filter housing
10:50 Remove jack stands and level car
11:50 Add oil and check levels
Thanks for watching!
Tools list
------------------------------
3/8" and/or 1/2" Ratchet
19mm Socket
36mm Socket
Flathead screwdriver, pick tool, or needle-nose pliers to replace gasket
Jack Stands
Floor Jack
Oil pan and empty jugs to bring old oil to your local AutoZone/O Reilly's
Parts List
----------------------------------
5 Quarts - 5W-40 Synthetic Oil - G-E55-540-1Q-DSP - tinyurl.com/mtswzbvk
Oil Filter Kit - 06d-115-562 - tinyurl.com/5n7r6n5b
Drain Plug - n-908-231-02 - tinyurl.com/644yzyvc
In my opinion, do not buy anything online, just go to your local VW dealership parts department where the pricing will be competitive and they will likely match any online OEM pricing that is lower.
Capacities and Specifications
---------------------------------------
My torque wrench recommendation: amzn.to/4bKQZnb
Drain Plug: 22 ft-lbs (I said 23 ft-lbs in the video, sorry!)
Oil Filter Housing: About 20 ft-lbs, the housing itself says 25+5 Nm
Oil: 4.9 Quarts, do not forget to count the oil used to prime the filter in that total.
Links to tools I used
---------------------------------------
36mm Socket - I bought an axle nut socket set: amzn.to/3G3RD0m
But you can just buy a single 36mm socket like this one: amzn.to/3FYPz9R
1.5t Floor Jack - www.harborfreight.com/15-ton-...
3t Jack Stands - www.harborfreight.com/3-ton-a...
Husky 3-ton Jack Stands are on sale at Home Depot for $30 (as of 11/13/2022): www.homedepot.com/p/Husky-3-T...
Need a starter set? Check out my Kobalt 299-Piece Mechanics Toolset review: • SOLD OUT? Kobalt 299-P...
Passat Engine Codes (this 2006 is the 2.0 Turbo FSI):
2.0 FSI BLR / BVX / BVY I4 DOHC 16V FSI 1,984 cc (121 cu in) 150 PS (110 kW; 148 hp) @ 6000 200 N⋅m (148 lb⋅ft) @ 3500 2005-2010 213
2.0 Turbo FSI AXX / BWA / BPY I4 DOHC 16V FSI turbo 200 PS (147 kW; 197 hp) @ 5100-6000 280 N⋅m (207 lb⋅ft) @ 1700-5000 2005-2008 235
2.0 TSI CAWB 2008-2010 235
CCTA / CBFA 280 N⋅m (207 lb⋅ft) @ 1800-5000 2008-2013 235
About the Metaloop Channel
---------------------------------------
Join me on my journey to become an ASE Certified Mechanic and inspire folks to work on their own cars. Along the way, I'll unbox tools and build a mechanic's toolbox from scratch on the DIYers budget. Join me and learn from my mistakes as I embark on car repair and maintenance.
This channel is for entertainment purposes only. Always double check any information provided for accuracy.
Негізгі бет Автокөліктер мен көлік құралдары 2006-2008 Volkswagen Passat 2.0T FSI Oil Change DIY Guide (Early B6 gen)
Пікірлер: 24