Seriously appreciate this video. Recently got a Fusion, and I have to (now) replace the bulbs. This video showed me exactly what I needed to do the job. THANK YOU!
@mokmo23
4 жыл бұрын
So glad i checked before telling a family member i'd change their bulb. Just saved me a headache :) Thanks!
@danielericksonmusic
4 жыл бұрын
Thanks man. This helped me out a lot. Going through the wheel well makes so much more sense then monkeying with anything up top. Had the whole job done in less then 10 min.
@Mario-dp6ru
3 жыл бұрын
Thank you for this video. It saved me from taking the whole assembly out!!! Truly grateful for finding your video.
@_Digishade_
7 ай бұрын
Thanks again for this video. I'd done this once before, but needed a refresher. Glad it's not as frustrating as I thought it would be!
@DavidRodriguez-er4rq
Жыл бұрын
Thanks for the video. You've helped many. God bless you and your family.
@chriskay3058
6 жыл бұрын
Thanks for posting. I never would have figured it out on my own. I got it changed, but it took me the better part of 30 minutes and several contusions to the wrist to do it. Whoever the brilliant engineer was that came up with this needs to be taken out back and shot. Then shot again. One should not need to possess the flexibility of a contortionist to change a freaking headlamp. It took me 45 minutes and several shots of tequila to finally calm down afterward. A pox on Ford and it's engineers.
@MorphnSeaGull
6 жыл бұрын
LOL, I feel you pain. I'm happy I don't own the third Gen of the Fusion as the bumper cover and headlight assembly all half to be taken off to change any bulb.
@thetetons744
2 жыл бұрын
My friend Althea was changing the bulb on ours and she said the same exact thing about whoever designed it haha
@MemestiffGaming
Жыл бұрын
Just did it with my dad, it took like 45 minutes and most of that was trying to figure out how to get in from above before I found this video
@saifhakeem1672
10 ай бұрын
Watching this video all the from AB brotha. 🇨🇦❄️☃️ October 24th, 2023 Thank you so much.
@jacobl4534
Жыл бұрын
Fantastic! Thank you for the great guidance!
@thinkb4uspeak643
Жыл бұрын
Really good video, I'm glad I came across it ,I have the front right turn signal bulb out on my 06 fusion that I'm about to go change and didn't know I could access it through the wheel well area like that
@funieman1
2 жыл бұрын
I truly appreciate you for this video
@landmind666
Жыл бұрын
This is so helpful it was quick but a pain in the rear putting the new one in. And the car keeps telling you every 20 minets to chech the lamp until its fixed
@triopharaoh
Жыл бұрын
Preciate it bruh … the oil change place told me my light component was melted and I needed a new assembly lmao … ok buddy, jus give me my keys 😂
@ambiem4337
2 жыл бұрын
Thanks so much for this. A tremendous help!!
@mahrko9455
3 ай бұрын
thank you it was helpful :)
@tocrob
5 жыл бұрын
@7:42 - " disengage top of flexible washer bottle filler neck from snap strap attachment " ( or just remove the bolt ) and see if you can get to the high-beam bulb . You can easily get a pair of LED bulbs ( 3x brighter @ 6000k color temperature and expected to last longer ) for ~$15 shipped on Aliexpress .
@tg8150
Жыл бұрын
Tip- remove the plug from bulb before pulling bulb out of assembly. Should be common sense.
@MioLeslie
6 жыл бұрын
Thank you so much for posting this. It helped me 100%
@MorphnSeaGull
6 жыл бұрын
Your more than welcome. My hard work gets it done and i'm happy that posting my videos do help people like yourself out. Thank you for thanking me. :)
@blacktempo77
Жыл бұрын
Thank You!!! Very Helpful!!!!
@mattjones530
4 жыл бұрын
Much thanks helped a lot!
@juggy3220
3 жыл бұрын
Wtf did i just watch... haha good job
@theodisriley1379
3 жыл бұрын
When you change this bulb, does it pop out or do you twist to get out.
@9mmamba388
2 жыл бұрын
How do you clip off the light ?
@TheMegdino
3 жыл бұрын
Thank you thank you thank you thank you thank you thank you
@RobertAllenroballen2
2 жыл бұрын
Thanks
@mary-ellenwood310
3 жыл бұрын
Why would you have to go through the hood when there is bulb access through that panel near the wheels
@Ford0815
6 жыл бұрын
Thank you for the video, what size of tires do you have and what brand ? I like the aggressive tread you have.
@MorphnSeaGull
6 жыл бұрын
My tires in this video are Sailun ICE BLAZER WST1 winter tires. I run Good Year ASSURANCE (Fuel Savers) in the summer. The size is stock 225/50R17.
@Ford0815
6 жыл бұрын
Thank you
@MorphnSeaGull
6 жыл бұрын
Not a problem. Your welcome. Thank you for your view.
@prioleau2012
Жыл бұрын
Is this the same way you do 06 mercury milan
@zzz7zzz9
5 жыл бұрын
new vehicles have just gotten ridiculous. I have to do this exact thing, and of course, to the passenger side bulb. it's just stupid. they basically design the stuff so the average person has to take their vehicle to the shop for even the most basic task. I remember a friend had an eagle talon, and the engine had to be partially pulled to change the sparkplugs.
@MorphnSeaGull
5 жыл бұрын
I agree fully. The third gen Fusion has to have the entire bumper cover off and the headlight assembly out to change a bulb. Also, my Fusion has to have the entire intake taken off to change the back three plugs.
@zzz7zzz9
Жыл бұрын
And here i am, back again, changing this same bulb...again. driver's side is still the original bulb. This is now the second time changing the passenger side. And it ain't any easier the second time.
@jamesschoedel7686
3 жыл бұрын
Now would I be better to change both of them or no
@yonygomez4704
3 жыл бұрын
Gracias!
@robbiehoke6289
Жыл бұрын
What makes it not work.
@dalethsorbet6062
2 жыл бұрын
the driver side you can not get to it from that panel i tried i had to remove the air cleaner box to get to that low beam but the passenger side you can get at it using that panel in the wheel well better hope you have skinny hands lol
Пікірлер: 50