Thanks man. Iv been busy, but there's lots not videos to come
@jamalunis2494
6 жыл бұрын
Holy shit! this is 18th street right by my house haha, vancouver washington... I knew i recognized that area! thats crazy
@docchappell9470
5 жыл бұрын
At least it runs on air.. That super trucker stick is a bit excessive lol. Nice setup though..
@martin1234512345
3 жыл бұрын
Luckily it isn't your truck
@KeystoneOutdoorsman
5 жыл бұрын
Awesome setup! Your manifold seems to sound different than mine, i have a steed speed.
@GarageOperator
5 жыл бұрын
E. K. Thanks. Mine is s DPS manifold...
@GarageOperator
8 жыл бұрын
@Dakota brown No sir just throw this together at home needed a turbo bad this what we had laying around. Im not using the electronics on it took all that stuff off
@roheljuarez7456
3 жыл бұрын
Wow i love it
@fordgarage2746
Жыл бұрын
Badass
@Kallaus_built
4 жыл бұрын
Which switch is the vgt brake and which is the exhaust brake?
@saudshahrani1357
2 жыл бұрын
Riding it better than sleeping with my girlfriend 😍
@calebogorman6355
3 жыл бұрын
Make a video on how u did it
@devontroupe296
8 жыл бұрын
like a ram pick up
@josecardoza3996
7 жыл бұрын
nice truck... look up Thunderbrake on you tube... there making a Jake brake for cummins sounds awesome
@kennethduffield8684
5 жыл бұрын
I don't think thunderbrake done anything more than a prototype. I've been searching for engine brake for my 97, only finding exhaust brakes
@chaseallen808
3 жыл бұрын
I wish I could find one for an 04 cummins but anywhere I look I can’t find an exhaust brake
@GarageOperator
3 жыл бұрын
Pacbrake has them. Depending on how far your 04 or 04-1/2 is into the year you might have to go with the older model then this one. pacbrake.com/product/c44045-prxb-exhaust-brake-kit/
@chaseallen808
3 жыл бұрын
@@GarageOperator ok thanks
@urskellenberger3024
8 жыл бұрын
Whats the story in terms of the manifold your using, down pipe and what other stuff did you need to modify? Anything with oil lines and the intercooler piping? Im very interested to see how your controlling it. Sorry bout all the questions im looking into doing this to my tuck, but unfortunately fleece doesnt make there controller any more. Thanks for the post and nice truck!
@GarageOperator
8 жыл бұрын
No worries at all that's why I post vids to help out other guys and there trucks. I have a 2ng gen manifold off of a 98 1/2 to 02 24v cummins, I have longer oil feed and drain lines, I cut and added to the down pipe to reach. For the intercooler pipe I just used 3" exhaust pipe I think I used 45 degree angles on each end. For the intake I just have a 45 degree 5" exhaust elbow with the filter on the end, and an adapter on the turbo side 4" to 5". For controlling the sleeve on the vgt i have a air cylinder hooked to a air valve that's hooked to a on board air compressor. Also I have the arm on the turbo set so it can only go back so far, I have a light spring pulling the arm closed so I have alittle extra boost off the line than when I'm up in rpms it'll open and it'll run like a bigger turbo. The air cylinder only operates the turbo brake I can't adjust the sleeve at will. That would be badass tho if they still made them controllers.
@GarageOperator
8 жыл бұрын
Also some advice if you do this install a drive pressure gauge on the manifold side so you can see the boost to drive pressure and adjust the arm accordingly, I have mine running 30psi of boost to 30psi of drive pressure. If you don't have the drive pressure gauge you can run really high drive pressure to low boost which sucks. Also sorry I forgot to put in the other reply you'll need to get manifold to turbo adapter. Coz the bolt pattern is alittle bigger on the vgt if I remember right
@GarageOperator
8 жыл бұрын
Also some advice if you do this install a drive pressure gauge on the manifold side so you can see the boost to drive pressure and adjust the arm accordingly, I have mine running 30psi of boost to 30psi of drive pressure. If you don't have the drive pressure gauge you can run really high drive pressure to low boost which sucks. Also sorry I forgot to put in the other reply you'll need to get manifold to turbo adapter. Coz the bolt pattern is alittle bigger on the vgt if I remember right
@FadedJoker
3 жыл бұрын
Someone wants to be a semi truck driver 😆
@theboogsterman
Жыл бұрын
Where can I get an actual Jacobs brake for my 06 Cummins?
@GarageOperator
Жыл бұрын
I don’t believe they’re producing them anymore. Surplus is an option Iv seen a few on EBay before that was brand new. Or find a used one someone is selling.
@jessecarpenter6434
2 ай бұрын
I know I’m way late. But please explaign the setup.
@GarageOperator
2 ай бұрын
No worries dude. This is my old set up that I don’t have anymore but it was basically an vgt turbo off of a 6.7 Cummins. I took off the electronic actuator and ran an air actuator to activate the exhaust brake. I had a Manuel stop on there to make sure I don’t completely close off the veins in the back of the turbo when I activate the exhaust brake. I used a spring that was adjustable for the vgt actuator to open up as I got on more throttle. I alos retained my 5.9 jacob‘s exhaust brake on the downpipe.
@jessecarpenter6434
2 ай бұрын
@@GarageOperator wow. That’s awesome. I didn’t know they had Jacob’s brakes for the 5.9. Tell me about that
@GarageOperator
2 ай бұрын
@@jessecarpenter6434 hard to tell if you’re trolling or not lol. But either way the Jacobs exhaust brakes are not made anymore as far as I know. You can still find them Randomly on eBay or market place once in awhile. They run off of a vacuum pump instead of compressed air like most all do now days. Only issue Iv had with it is needing to replace the vacuum pump 1 time since we’ve had it. Truck was bought new in 2006 with the exhaust brake added at the same time. Really saves your brakes. It’s hard to beat the Jacobs exhaust brake sound, my favorite out of all of them and it’s the loudest as well. Unlike all of the ones out now.
@jessecarpenter6434
2 ай бұрын
@@GarageOperator promise I’m not trolling lol. Just curious. I’m not super familiar with Cummins aftermarket things aside from the obvious. But I especially know little about the exhaust and engine brake side of things. I do plan on getting a Cummins in the future. And I’m just doing what I can to learn about anything I can. Thanks for your time.
@GarageOperator
2 ай бұрын
@@jessecarpenter6434 no worries dude. It was just hard for me to tell that’s all. Lol. I don’t mind at all. I’m glade to share what knowledge I have. I’m not a mechanic by any means but I’m pretty good with my hands 😂 I’m in the middle of a manual to manual swap on my 06. Finally got all the parts together to swap my 6spd to an Eaton fuller 13spd. That 6spd is going into my 07 mega cab I just picked up with a blown auto. Anyway sorry for my rant. I’m super excited about it. My advice is. Join a bunch of the groups of FB there’s a lot of info there on most everything. You can also drop ur email if you want. I’d be glad to share what little knowledge I for the Cummins.
@connorbaz5980
Жыл бұрын
Dude, that is one slick setup! Do you have any experience with the PacBrake, and how the two compare?
@GarageOperator
Жыл бұрын
Yes I do. We installed a PacBrake on my brothers 2nd gen. It holds you back alot more and way more braking at lower RPMs. The only bad thing that I have with newer exhaust brakes are they’re so quiet but you won’t get in trouble that way I guess lol. 😂
@connorbaz5980
Жыл бұрын
@@GarageOperator lol for sure. People these days get their feelings hurt over the smallest things. 😂 Interesting to hear that about the PacBrake. I have one on my 2nd gen (and love it), but don't have anything to compare it to. That said, do you have a Gear Vendors Splitter system? Works wonders for me while hauling. 10/10 would recommend.
@GarageOperator
Жыл бұрын
Yes I did have one on this truck actually. But it broke and was out of warranty so I haven’t got around to fixing it 😭😭 I am actually planning on doing a 10or probably a 13spd swap into my 06. Iv never seen one in a 3rd gen and I would love to have that gearing through all RPMs. I would also video and explain all the things needed for it and make a video out of it for others who want to do a similar swap. There’s some videos out there about it but more details wouldn’t hurt. I know about 3-4 guys around me that want to do it as well 😏 But fear the not knowing parts and such in the swap.
@connorbaz5980
Жыл бұрын
@@GarageOperator oh dang, that hurts. Mine has been largely trouble free, but could use some TLC from a technician I think. Shifting is sluggish sometimes, and "gear chunk" has been more of a thing as it gets older. That said, I've seen a couple Eaton Fuller trans swaps, and that is COOL. Might be something I'd be interested too... You never know. 😏
@mikeandrade7877
2 жыл бұрын
Can you use both brakes at the same time ?
@GarageOperator
2 жыл бұрын
Yes I can. But either one has plenty of braking power so both at the same time is pointless.
@nicolasramirez6567
3 жыл бұрын
Nice sound!!!!! What's your exaust size?
@GarageOperator
3 жыл бұрын
I have a 4” down pipe to 5” straight pipe going into dual 5” stacks. It sounds much better in person and Iv had mentioned people say that they thought I was a log truck coming down the road lol
@crazypilotguy
3 жыл бұрын
So the big button is the exhaust brake and the little switch is the turbo right?
@GarageOperator
3 жыл бұрын
The push pull switch on the front is the jacob’s exhaust break. The Toggle switch on the passenger side is the turbo exhaust brake. The rocker switch on the driver side is for gear vendors under overdrive. Basically it’s just 2 different styles of exhaust brakes on my truck.
@Dieselj-ld9rt
9 ай бұрын
0:36 how did you turn it off if you didn’t press the button?
@GarageOperator
9 ай бұрын
There’s a secondary safety switch on the accelerator that also shuts it off. You don’t wanna be accidentally accelerate with the butterfly valve closed 😆
@Dieselj-ld9rt
9 ай бұрын
That would be a bad day if that happened lol
@dakotaracer287
8 жыл бұрын
They finally came out with a vgt swap for the 06? Where did you get it? Fleece told me they couldn't get one working on the 06-07
@GarageOperator
8 жыл бұрын
No sir home made swap me and my brother made it in our drive way took the computers off I'm Using springs and an air cylinder to control it
@dcoppedge06
6 жыл бұрын
I wonder why fleece couldn't make one work on the 06-07? What is do different that makes them not able to??
@javierhernandez215
3 жыл бұрын
bd diesel has a vgt kit
@DasSnakeBoy
6 жыл бұрын
Where’d you get the extended shifter? Ohio diesel?
@GarageOperator
6 жыл бұрын
ALL KNOWING BILLY it’s home made. It’s a piece of 3/4” round tubing that is bent at the right angle. With a bolt welded to the end that fits the stock shifter head.
@Drum3s43ver
8 жыл бұрын
What kind of stick extension is that?
@GarageOperator
8 жыл бұрын
It's homemade. I bought 3/4" round pipe at Home Depot. Bent it in my trailer hitch to the shape I wanted, and welded 2 bolts on one end. Welded a bolt on the other and threaded it for my shift knob.
@yankdoodlediesel2574
3 жыл бұрын
Where do I get a long stick like that ?
@GarageOperator
3 жыл бұрын
I made this one. But since then I found that Amazon has stick extensions. Here’s a link to the ones I believe fit. Dewhel Gear Shift KNOB Extender Extension 10X1.5 Lever Gear Shifter 3.75"(94MM) JDM Rally Drift for Honda Acura Color Black www.amazon.com/dp/B00VRT23PI/ref=cm_sw_r_cp_api_glt_fabc_GH9QFFJSTXNNATT1CWF0
@doubleitp
3 жыл бұрын
You're either born with one, or you're not ;) ;)
@EdelbrockTheDog
8 жыл бұрын
what kind of turbo is that
@GarageOperator
8 жыл бұрын
A he351-ve vgt off a 6.7 cummins
@martymyers4528
5 жыл бұрын
what is the toggle switch on the shifter for?
@bryman868
5 жыл бұрын
Marty Myers exhaust brake
@martymyers4528
5 жыл бұрын
@@bryman868 then what is the push pull switch for on the shifter?
@bryman868
5 жыл бұрын
Marty Myers good question. I'm not sure.
@giannid6291
5 жыл бұрын
Looks like he has 2 exhaust brakes on the truck. One vgt and other inline or on the back of the turbo . Dont know why he would run 2 , only can use one at a time
@boomer1049
3 жыл бұрын
How's your exhaust brake holding up and do you tow a lot?
@GarageOperator
3 жыл бұрын
Thanks for the comment. My exhaust brake has held up great. No issues in all these years since it’s been put on which was 2006. Iv only relaxes the vacuum pump once for it like 7 years ago. Yes I do tow and I haul a bunch. Having the exhaust brake is very nice. I even use it with just the truck. I got 130,000 miles on my first set of factory brakes and they still had around 25% life when I changed them out. That’s with 60% or more of the time hauling and pulling something. The thing that doesn’t last is the factory clothes on these year trucks. Stock it would slip pulling. Got a dual disk aftermarket clutch and never looked back.
@boomer1049
3 жыл бұрын
@@GarageOperator Do you tow much because I do and also what brand is it?
@GarageOperator
3 жыл бұрын
Yes we do. My brother has the white 2nd gen. He use to tow 90% of the time with it around the 5000 to 9000 mark. All we have ran are Southbend clutchs. I have a nephew who did the Valair clutch and said that’s good too. My brother and I both use the street dual disc rated for 600hp. I am actually going to be doing a Eaton fuller 13spd in my 2006 this spring probably. I want the benefits of splitting gears in a 13 speed or a 10 speed pulling and even the longevity of them over the standard manuals in trucks.
@boomer1049
3 жыл бұрын
@@GarageOperator Is it a banks exhaust brake?
@GarageOperator
3 жыл бұрын
I have a Jacob’s exhaust brake on mine. That’s the one you get at the stealership. Banks stuff is good it’s just spendy. My brothers 2nd gen has a pac exhaust brake on it. He has the same braking/hold back at all RPMS that’s why he went with it. Now I think all the exhaust brakes do that. Bd, Pac and Banks.
@lindamcreynolds9422
4 жыл бұрын
788000
@ryanv4887
8 жыл бұрын
What's the Jacobs brake for exactly
@GarageOperator
8 жыл бұрын
It's an exhausts brake
@DasSnakeBoy
6 жыл бұрын
It slows the truck down by closing the exhaust ports(valves) -less stress/wear on the brakes- you try stopping 5 ton truck with just brakes
@GarageOperator
8 жыл бұрын
Its an exhoust brake
@jesseesparza4974
2 жыл бұрын
Thats the most molested truck ever 👍
@GarageOperator
2 жыл бұрын
Just you wait. Iv got plenty more to come 😏😏
@devontroupe296
8 жыл бұрын
wait a jacobs brake on cummins
@stonenpebble
4 жыл бұрын
Devon Troupe that ain’t no jake brake 🤦🏼♂️😂
@devontroupe296
4 жыл бұрын
stonenpebble lol yeah I understand that now I was 14, when I commented that, look up thunder brake, a company that built but never finished a true Jake brake for the 5.9
@russrtspooling7702
6 жыл бұрын
When pressing the break is too difficult
@GarageOperator
5 жыл бұрын
russrt spooling I hate abusing that brake pedal lol. Especially when I’m loaded and got 10 plus k behind you.
Пікірлер: 98