My '06 Chevy HHR was stalling out of issue when driving or idling with out any codes popping up. I replaced everything on this vehicle. can't figure out why checking grounds. I'll check in the computer and the transmission control module for cleaning. come to find out this was either moisture or some type of liquid that made its weight into the engine's ECM so we are hoping this is what was causing the problem. if you're having this issue, please feel free to comment.
fuel pressure test came back positive
Will check the ECM. there was brown liquid on the grape port on the ECM computer connector we have cleaned this device and let it sit outside for at least 8 hours of hot direct sunlight. he also have double checked the ports within 6 hours and it looks like it was almost completely dry. we will eventually take the back of it off to make sure there's no internal damage or corrosion inside. please note these ECMs are plug and play on Chevy HHRs and it can't be replaced with no programming required as long as you have the same motor but let's hope that's not the situation.
you did notice in the video we didn't show that there was fluid in one of the connectors until after the video was complete. so please be in mind there was yellowish fluid on the actual connector for the gray port only
Негізгі бет 2006 Chevy HHR 2.4 LT STALLING OUT ISSUE PART 1
Пікірлер: 5