One of the best custom builds I think I have seen, concept and execution are top level
@dieseladdict6685
4 жыл бұрын
The interior work is incredible. That center console is awesome!
@lowcountryholler9176
Жыл бұрын
This build is completely Bad To the Bone! I’m in Love with that truck! You did a Fantastic job!
@chopshopart
Жыл бұрын
Thanks
@jeremycayea7541
3 жыл бұрын
This is an amazing build, there’s nothing I don’t like. What an excellent combination of old and new.
@demitrimeyers2121
2 ай бұрын
Truck so damn beautiful it almost brought tears in my eyes😍
@ccooper04
Жыл бұрын
I do like how you have more room behind the engine with the 86 cab! Giving me more thought on a wrecked 06-07 and swapping cabs than using a 86 frame and all and trying to make it all fit and fab up mounts.
@GRVDGRLIFE4
4 жыл бұрын
Sweet squarebody an that Duramax look like it's right at home under the hood
@1972jwalk
5 ай бұрын
This is one of my dream trucks !
@julio38racing29
5 жыл бұрын
Bro that truck is beyond awesome!!! 🤤🤤🔥
@lynx9311
4 жыл бұрын
Hey man, I'm just curious what seats are those? I got a 83 c10 that want to put a new set of captains in but I haven't found the right ones yet.
@stevebuttrum
3 күн бұрын
Perfection has been attained!
@ronniebenoit4081
3 жыл бұрын
Love them ol square bodies. And alot better than that boat anchor of a 6.2. Lol
@kindacool2315
5 жыл бұрын
Been waiting for you to post more. Love this truck
@Sharptooth100
4 жыл бұрын
Excellent idea, lad. Even using that Duramax engine in Chevy Caprices and Corvettes is a must. No more gasoline issues.
@emanuelreyes4148
4 жыл бұрын
Hey man that’s a beauty of a truck. Absolutely beautiful. I’m looking at a model like that to be restored.
@patrickb840
10 ай бұрын
Damn, that’s a dream truck for sure.
@josephmcintyre752
5 жыл бұрын
Not into the lifted 4x4 but your rig is CLEAN. Very well executed. Great craftsmanship. Rock on dude.
@chopshopart
5 жыл бұрын
Thanks! It's not lifted though
@Bigbam001
2 жыл бұрын
@@chopshopart how did you avoid lifting it for the duramax set up?
@chopshopart
2 жыл бұрын
@@Bigbam001 I mounted the bed is the lowest possible and then put the cab at that same height
@Brandon_obs_ls
9 ай бұрын
@@chopshoparthow did u make the gauges work did u splice into the old cluster wires and and tie the digital ones how hard was it? Second question is that the oem harness or did u get an after market
@mikephillips9092
6 ай бұрын
Been putting a lot of research to this exact build for myself. Any chance you have any videos of the build or at least let my know the set up? i would appreciate it. Yours is by far the nicest build on youtube and i think i have seen them all!! thanks Mike
@chopshopart
6 ай бұрын
No I just have the picture slideshow videos they are in the older videos
@highoctain113
4 жыл бұрын
I love this truck. I wish I could convince you to sell it and I had the cash to buy it... Excellent work.
@jimvonnormann9485
4 жыл бұрын
That’s the case here then?:(
@tater0909
Жыл бұрын
There’s my dream. Awesome build
@smokesmothertruckerperform213
4 жыл бұрын
Badass build I hope some day I will have time to put together a crew cab
@bordernflgurus4414
3 жыл бұрын
So did you lengthen the cab? Or chop the frame? Truck looks incredible by the way, love it. I’m just about to start one like this
@russellg7382
3 жыл бұрын
Interested in how you did the engine mounts. Sits lower than others I have seen and it’s super well done!
@erinbasinger
3 жыл бұрын
Amazing job!! You’ve done exactly what I want to do with my ‘86 Crew Cab. Complete chassis swap! Roughly how much did it cost?
@mrgmc6314
2 жыл бұрын
Sweet now I have a start point ... I've got a 2004 sierra 2500hd with the big block 8.1 and Allison trans .. trucks got some rust on the body but runs like a top and the frame is good ...I've been thinking of going this direction for a while wasn't sure had it been done now I see ...awesome build
@chopshopart
2 жыл бұрын
Sounds like a good platform to start from
@XER239
4 жыл бұрын
So with using the steering column, did you need a stand alone wiring kit?
@backyardbowties
4 ай бұрын
Is that a short bed or did you have to cut one to a special length
@carloscastellanos1559
Ай бұрын
Nice looking rig!!!
@Rezboys
Жыл бұрын
Curious on the price of this build!? I was wanting to do the same to my 81 Chevy crew cab
@newportsurfshop
Жыл бұрын
Best build that I’ve ever seen
@newportsurfshop
Жыл бұрын
Would you sell this?
@newportsurfshop
Жыл бұрын
I have the same one but it’s a manual Cummins.
@michaelstella6574
3 жыл бұрын
This is one of the coolest trucks I’ve seen. Imagine what people would be willing to pay for one of these.
@mikelatham5931
4 жыл бұрын
One helluva good job. Beautiful truck
@taylorlathem9968
2 жыл бұрын
How did you go about getting the headlights wired up? I’m planning to do this soon. Did you just use h4 to 9006/9005 adapters?
@chopshopart
2 жыл бұрын
No I spliced the 1986 plugs into the 2006 chassis harness
@taylorlathem9968
2 жыл бұрын
@@chopshopart right on thanks! Would you be able to give me a description of what wires I need to splice into eachother
@chopshopart
2 жыл бұрын
Don't remember I sold the truck like a year and a half ago
@taylorlathem9968
2 жыл бұрын
@@chopshopart no worries thanks though man appreciate it!
@stacyadams4386
2 жыл бұрын
Button's do anything on the steering wheel?
@chopshopart
2 жыл бұрын
Yes I believe so if I remember right like the Volume worked
@royreid547
3 жыл бұрын
How much did it cost to make? what was the time frame the build as well?
@DrewCampbellRacing
4 жыл бұрын
Awesome job! That truck is a beast!
@oldcroneysgarage9739
4 жыл бұрын
Its nice. In the future I'm gonna put a cummins in my 84 c30. I'm also gonna convert it to be a 4x4
@santiagodelgado8343
4 жыл бұрын
Love this truck Man
@DeliriousknlghtTheAwesome
4 жыл бұрын
Would absolutely buy that truck if I had the money
@johnroger2154
3 жыл бұрын
Where did you get that headliner because I've been looking for one for my crew cab for years
@chopshopart
2 жыл бұрын
The headliner material was glued to the ceiling with a extra heat sensitive upholstery glue
@paxtonstreeter9912
Жыл бұрын
Is there a way I can get ahold of you to ask some questions about the build
@keeangravatt
Жыл бұрын
Absolutlely love that thing! Would love to do something like that within the next few years. Only thing I'd change is the tach. its a stock diesel, the max rpm itll prolly see is 3500, so theres not a point in having a 8000 rpm tach😂
@chopshopart
Жыл бұрын
Until you need to hit 8,000 RPMs those gauges are made for LS motors too
@keeangravatt
Жыл бұрын
@@chopshopart That makes sense, lol Everything bout the truck is immaculate, i'm jealous😅😂
@TheBossXVI
2 жыл бұрын
Clean and Really nice 👌
@antoniojackson1976
4 жыл бұрын
Clean👍👍👍👍👍👍👍
@brockmire2303
4 жыл бұрын
Beast Mode
@chancecolwell3736
3 жыл бұрын
What did you do for the wiring underneath the dash
@jpblanchette3489
Жыл бұрын
Do you still have it? I see another 3+3 no restomod in another video!!
@chopshopart
Жыл бұрын
No I don't
@brockmire2303
4 жыл бұрын
Dam good looking truck
@jamesbost4798
2 жыл бұрын
That's a sexy fucking truck man
@rolandomota9836
3 жыл бұрын
🇺🇸That's a bad MAMMA JAMMA 🇺🇸
@mikeroundy6387
2 жыл бұрын
Hey James how do I get some info from u to build a truck
@BurbDude
2 жыл бұрын
I was thinking of body swapping my 1999 suburban into a single cab long bed square body
@chancecolwell3736
3 жыл бұрын
What did you do for the wiring to get it to start do you think I could use my stack sterling Collom
@chopshopart
Жыл бұрын
That's what I did
@chopshopart
Жыл бұрын
That's what I did
@adamortiz2004
Жыл бұрын
If you did sell it what would you charge to build another one identical to that
@chopshopart
Жыл бұрын
At least $40,000
@shtoleva07
3 жыл бұрын
How can I talk with this guy, me and my partner just did a Cummins swap in his 78 crew cab and we are doing the Lbz in my 89 crew cab, I want to know how to ease the process.
@robdittes5228
2 жыл бұрын
He did a chassis swap. Not an engine swap.. I believe the squarebody is sitting on a 2006 frame and driveline
@landon9575
3 жыл бұрын
sits insane
@Skankhunt98745
4 жыл бұрын
God damn man! What a beauty
@mrsmooth420productions5
3 жыл бұрын
Ya thats clean as hell
@AndrewChildress
2 жыл бұрын
I want to do this myself but single cab long bed. Any tips?
@chopshopart
2 жыл бұрын
Not really I have some experience in this type of work so I could guess I just jumped in head first and did it figured it out along the way
@AndrewChildress
2 жыл бұрын
@@chopshopart ok, thanks
@adriantorres3094
4 жыл бұрын
NICE BUILD !!!!
@chopshopart
2 жыл бұрын
Thanks! subscribe I'll be posting more
@brandedmcgowan9414
4 жыл бұрын
Gauges similar to the gmt900 trucks. Better than the digital ones
@norrisabram9577
6 ай бұрын
Awesome
@dexterlecter7289
2 жыл бұрын
Was this a budget build?
@chopshopart
2 жыл бұрын
🤷
@AlaskaNards
4 ай бұрын
What would a building like this cost???
@chopshopart
4 ай бұрын
Message me on my Chop Shop art Facebook page
@ReshardsAutomotiveWorkshop
4 жыл бұрын
Great job.
@johnbar4126
4 жыл бұрын
Shuch a beautiful truck man!!
@cjlake2827
4 жыл бұрын
What kind of gauges are these and where do I get them
@zombienectar
4 жыл бұрын
they said Dakota on the bottom. I'll be looking for those also man.
@loop12live11
3 жыл бұрын
Sweet
@biohazzardgaming938
Жыл бұрын
I want to do this to my 87 Squarebody chevy
@Art_Land82
Жыл бұрын
What happened to this truck?
@chopshopart
Жыл бұрын
Sold it
@ajlaprise9766
3 жыл бұрын
Is this truck for sale by any chance at all ????
@chopshopart
2 жыл бұрын
No
@Dekkar4
4 жыл бұрын
Is this the truck James Miller built?
@chopshopart
2 жыл бұрын
Yes
@brockmire2303
4 жыл бұрын
Awesome I love it
@jnitro35
2 жыл бұрын
Hi, any interest in building another one of these for me by chance? I have basically the same two donor trucks. Let me know, very cool build
@chopshopart
2 жыл бұрын
Sure, if you have Facebook search Miller Auto body I have a Facebook page with all the information on it
@adamortiz2004
Жыл бұрын
Did you sell this truck
@chopshopart
Жыл бұрын
Yes
@alejandroheredia68
4 жыл бұрын
Wow nice work
@jadenschrenk6803
3 жыл бұрын
What exhaust are you running
@chopshopart
2 жыл бұрын
MagnaFlow 5 in
@dylanschupp5243
3 жыл бұрын
What'd you do for the center console and seats
@chopshopart
2 жыл бұрын
Full console built around a OEM 1980s center console
@chopshopart
2 жыл бұрын
Seats are out of a 2006 Silverado
@chancecolwell3823
3 жыл бұрын
How did you get to exact mileage on the Dakota digital gauges
@chopshopart
2 жыл бұрын
I had the original gauge cluster from the 2006 frame I just put that amount of miles on the Dakota digital you can set it to whatever miles you want right when you receive the Dakota digital gauges you can also send it in and have them reset it to zero
@chancecolwell3823
Жыл бұрын
@@chopshopart how did you do the wiring for the gauges
@chopshopart
Жыл бұрын
@@chancecolwell3823 they are Dakota digital gauge cluster it came with a manual
@peterbuiltsouthdakota2441
4 жыл бұрын
What size and what wheels and tires are those
@chopshopart
2 жыл бұрын
20x10 don't remember the tire size
@bobbyrooster7125
3 жыл бұрын
What size rims and tires are those?
@chopshopart
2 жыл бұрын
20x10s don't remember the tire size
@mattrebyak59
3 жыл бұрын
How much was the cost of the rebuild
@chopshopart
2 жыл бұрын
Depends
@mikeani32
Жыл бұрын
Is this truck for sale ?
@chopshopart
Жыл бұрын
I've sold it while ago
@siegfridkrause3244
4 жыл бұрын
Good job
@ChadLisonbee
4 жыл бұрын
Fantastic job!
@chopshopart
2 жыл бұрын
Thanks! subscribe because I'll be posting more
@ChadLisonbee
2 жыл бұрын
@@chopshopart done. I’m getting ready to cut my frame as we speak.
@chopshopart
2 жыл бұрын
@@ChadLisonbee nice as they say ruining them 👍🏻😁
@chrishansen7004
2 жыл бұрын
Not knocking a chassis swap, but how the hell does someone get the parts for that
@chopshopart
2 жыл бұрын
It's just a combination of 2006 Silverado and 1986 stuff
@choochieman5615
4 жыл бұрын
How much you want for it
@zachjuduh3682
4 жыл бұрын
Good stuff
@TylerLabbe
4 жыл бұрын
Wheel and tire size?
@chopshopart
2 жыл бұрын
I believe they were 20x10s don't remember the tire size
@jimvonnormann9485
4 жыл бұрын
Any way that this truck is for sale? Man it’s what I want for sure!
Пікірлер: 161