Customer was having issues with no crank, no start a few days ago and found me on Google. I went to perform a diagnostic with my scanner, and was getting codes for cam shaft position sensors, and 02 sensors bank 1 and 2. I replaced all sensors, and still no crank. I wasn't convinced at first the Fuel pump was bad, but after closer look found there was no fuel pressure. So we picked up a fuel pump on Amazon, and installed it the following day. I can't say this will be an easy install for everyone, but if you follow my video, and have determination, you will get the job done like I did in about 1-3 hrs. you will need basic tools for this job, including socket wrench set, 3 Jack's, pliers, hook tool, regular flat head screw driver, sledge hammer, and new pump, and new fuel filter. I will list these items below for you if you don't have them already.
WARNING!! DO NOT BUY AMAZON FUEL PUMP!!
I was updated by the customer as of 7/19/2023 and she is having issues with the sending unit.
Fuel Filter. amzn.to/44xoPrO
Mechanic Tool Set amzn.to/44yaBqA
Pliers Set amzn.to/3XKkyz4
12 Ton Bottle Jack amzn.to/3D7RoQZ
Scissor Jack amzn.to/46zgPIJ (gas tank)
Sledge Hammer amzn.to/3NJeiD1
Screw Driver Set amzn.to/44hOYLm
Hook Tool Set amzn.to/46IqA7i
Jack Stands amzn.to/43cJlg9
#fordf150 #howto #diy
Негізгі бет 2006 Ford Expedition "Fuel Pump" Remove & Replace - fixed crank no start
Пікірлер