Saved me a bunch of time researching to see where it’s at. Appreciate the video, same issue on 06 4.7l Mander
@jeeplife4ever798
Жыл бұрын
Good I’m glad!! So I actually just got another one about a year ago 😂😂😂 it’s a 2007 but almost the same color and the same 4.7L v8 lol
@jeeplife4ever798
6 жыл бұрын
Hey guys! Never checked back after making the video. It fixed the idle problem but I still get the motor wanting to die every once in awhile but definitely not as much as it did before replacing it!
@MarianaSilva-ub8wc
3 жыл бұрын
I'm replacing my the same part plus gee valve & map sensor then cleaning out the body throttle & mass air filter. Before this my commander was also dying and idling rough changing my starter fixed the dying out problem now hopefully all of this will fix the rough idle..
@_XOXOLOVELESS
6 ай бұрын
Check your alternator, that’s what I did to mine
@nahumtorres4647
17 күн бұрын
Thank you it helped me a lot
@jeeplife4ever798
17 күн бұрын
@@nahumtorres4647 I’m glad this video could help you!
@reina.isabel_21
25 күн бұрын
Saved me time researching your video was fast and straight to the point! Loved it hopefully this makes my code P0344 go away she has been lagging on speed and idling funny hope this works!!
@jeeplife4ever798
24 күн бұрын
@@reina.isabel_21 I’m so glad I could help you out and save you time!! I hope that it helps fix your issue!
@BB02XX
6 жыл бұрын
Try running some Marvel Mystery oil in the gas. I have and the engine is running a lot smoother. I also put a quart of MM oil in the crankcase about 500 miles before I change the oil. Just drain out a quart 500 miles short of the oil change, replace with the quart of MM oil and I am good to go. My lifters run a lot smooth. Seems to be getting better gas mileage too
@wiley0714
4 жыл бұрын
I also use the Marvel...
@TheBodymrgood
Жыл бұрын
This should have fixed the rough idle, I've done it before. To check the code I used my mechanic doctor app and device that plugs into the vehicle. It give a p0344 code which is camshaft positioning sensor intermittent bank 1 on single sensor code
@jeeplife4ever798
Жыл бұрын
Unfortunately mine wasn’t throwing any codes 🤷♂️ mine was guess work and just happened to work lol
@davidbullock9574
3 жыл бұрын
08 Jeep commander 5.7 doesn’t want to start has power alternator good battery good wondering if the crank shaft position sensor would make it not start
@abrahamarreola1728
5 жыл бұрын
What were the symptoms so you changed the sensor, thanks buddy
@beancarachelle
7 жыл бұрын
This video helpful, I have a commander myself and I have a hard time finding repair videos. Did it fix the shakiness of the engine?
@jeeplife4ever798
Жыл бұрын
It did!!!
@yusepelinacosta7315
6 жыл бұрын
Try the o2 sensor map sensor and last do the pcm had the same problem did everything ended up being just a 02 sensor
@wiley0714
4 жыл бұрын
I have an issue right now where when I try to start the engine after it's been driven for a while so let's just say a hot engine it is hesitant to start. I'm going to change the map sensor and the engine coolant sensor. Since it looks like the engine coolant sensor is right in front of the map sensor I figure I might as well change both. You might have had an issue with the same thing, because you didn't mention whether or not your issue was when the engine was warm cold or both
@kapisithekid2843
4 жыл бұрын
RainbowSixThree Enlightened where you able to fix the “unable to start after hit engine?”
@SaeedAlzarooni
7 жыл бұрын
Keep it up and thats one amazing simple video!💪🏻
@PaleVillian
2 жыл бұрын
Thank You!
@jeeplife4ever798
2 жыл бұрын
Hope it helps!
@pamasonry6080
6 жыл бұрын
Video was of much help thanks
@nefiespinal6996
8 ай бұрын
Mándame el video ! Necesito cambiarlo en el mío !
@dennisclark8766
6 жыл бұрын
Well done. Thanks for sharing. Please do one on how to open the sunroof, mine won't open.
@jeeplife4ever798
6 жыл бұрын
Dennis Clark please specify and I definitely will look into it! I haven't had any issues with mine so far
@dennisclark8766
6 жыл бұрын
When I bush the button to open the sun roof nothing happens. That's all I know.
@jeeplife4ever798
6 жыл бұрын
I'll look into it and when I figure it out I'll make the video for you!
@ezequielrivera1
4 жыл бұрын
Having the same symptom with my 06 Jeep Commander 4.7 v8 exact model as yours, did changing crankshaft sensor fix the problem, if not what did. Need help, Thank you
@luisamaro1090
3 жыл бұрын
Thanks will try it my 06 commander is doing the same
@ezequielrivera1
4 жыл бұрын
I have a 06 commander with the exact problem, did the New crankshaft position sensor fix the problem?
@corymichaelbowman
6 жыл бұрын
Thank you for the video! My wife and I just bought 2006 Jeep Commander 4.7L V8. Just had ESP BAS & Traction light come on at the same time. The Jeep started shifting weird then at times the engine would shut down randomly. Now the check engine light is on with the rest of the lights. Do you think replacing the sensor would be my solution? Thank you for your response.
@uzoechisamuel
5 жыл бұрын
I would recommend scanning the control units first before replacing anything. By scanning, you will have an idea of what needs to be replaced. Sometimes, you only need to clean parts and they are good to go.
@wiley0714
4 жыл бұрын
ESP light switch your traction based and then different shifts which are transmission based. I have 2 commanders and I know that depending on the year they're supposed to "flash" the module to update the transmission. However my suggestion would have been to disconnect the negative cable for about an hour and then reconnect it to let the PCM reset. My 2006 was bought new so I know I had it flashed one time my 2008 I did not purchase until 2017 so I do not know if they ever flashed it but I would presume that at some point they had.
@dannyboyesparza7937
2 жыл бұрын
Nope thats thw computer thats not working
@vondellacrawford1405
6 жыл бұрын
Yes I’m have problem with misfire and now it’s saying crankshaft sensors. My engine light is on n now it’s flashing. Please help
@juanitaaustin4092
5 жыл бұрын
I have 2008 Jeep commander all the lights are on the dashboard what can I do
@byronlee6486
5 жыл бұрын
jay bogaus Take it to the auto parts store and have them scan the codes.
@juantellamas4047
6 ай бұрын
WHAT NUMBER IS THE BOLT HOLD THE SENSOR
@jeeplife4ever798
6 ай бұрын
Not sure of the P/N. I have found a couple different links that sell the part but did find the specifications 11 mm hex head 1/4-20 3/4 inch thread body
@DVStamps
6 жыл бұрын
I see your video is a year old, im sure you've had to replace it again. You need to fix that valve cover leak, oil gets in the connector and they go out.
@kevinohara4783
7 жыл бұрын
Intrested if it helped , and did the engine shake in idle??
@jeeplife4ever798
6 жыл бұрын
Kevin Ohara there never really was a shake, more like just wanting to die. This fixed that problem for the most part. If you’re having a shaky idle then it could possibly be the coil packs which is a simple and quick, but expensive, fix. Autozone has coil pack sets for about $150 plus tax
@andresb231
3 жыл бұрын
could you please tell me the part number
@yairdelapaz876
6 жыл бұрын
Is this the reason why my commander wont start i took it to the river drove it into the water and of all sudden it turned off couldnt start it back on idk wt it is ?
@wiley0714
4 жыл бұрын
Sounds like it might be an air restriction on the intake from all the water blocking any possible ambient air from getting into the engine.
@davidgoodell6998
4 жыл бұрын
hydrolocked
@roy6192
3 жыл бұрын
It's not a boat you donut
@thatguyrob2dope128
5 жыл бұрын
Naw thanks man I appreciate it how much was the part?
@jeeplife4ever798
5 жыл бұрын
DeadlyColt45 it was about $35 at autozone
@thatguyrob2dope128
5 жыл бұрын
Jeep Life 4ever thanks I appreciate it now do you have any suggestions for a computer for the Jeep or a after market one I could buy like for plug and play because I’m looking at about a 850 dollar part
@SaeedAlzarooni
7 жыл бұрын
Hows the car now though?
@jeeplife4ever798
6 жыл бұрын
Saeed AlZarouni much better now. I still have some other issues with the engine and once I am able to fix those I will post the videos then.
@jayalcoser5869
4 жыл бұрын
A v8 is not a 4.7 its a 5.7 And the moter that it has is a 3.7
@jeeplife4ever798
4 жыл бұрын
Jay Alcoser I can assure you sir it is a v8 4.7L. Google is your friend if you don’t believe me
@richierich8077
4 жыл бұрын
Powertrain Engine 3.0 L OM642 V6 (turbocharged diesel) 3.7 L PowerTech V6 (gasoline) 4.7 L PowerTech V8 (gasoline / E85) 5.7 L Hemi V8 (gasoline)
@davidgoodell6998
4 жыл бұрын
I have a 4.7 also and its a V8. I promise since I changed out EIGHT SPARK PLUGS
Пікірлер: 58