Parts used listed in the description below!
Watch a full tutorial as a 2007 Toyota Camry will have a new 5 channel NVX amplifier installed. This new amplifier will be paired to an aftermarket radio that was installed previously. This amp will power all interior speakers as well as a sub in the trunk of the vehicle.
NOTE: Our Camry was equipped with the JBL factory amplified sound system which we will show how to bypass within this video.
This video applies to Toyota Camry models for years 2007, 2008, 2009, 2010, and 2011. This video also includes complete amplifier wiring and JBL bypass, installation, and testing.
Click here for the radio install video:
• 2007 - 2011 Toyota Cam...
Click here for the front speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the rear speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the backup camera video:
• 2007 - 2011 Toyota Cam...
***JBL Amplifier wiring diagram is at @5:30 of the video!
Factory 12 Pin Harness Wiring Diagram
Speaker Location Factory Color Pin Location (from plug side, not wire side) Aftermarket Harness Re-Pin Color
-Front Door 6x9 Speakers
Front Left Speaker (+) Pink 2 Re-Pin / Connect to White
Front Left Speaker (-) Purple 1 Re-Pin / Connect to White / Black
Front Right Speaker (+) Light Green 9 Re-Pin / Connect to Gray
Front Right Speaker (-) Dark Blue 3 Re-Pin / Connect to Gray / Black
-Rear Deck 6x9 Speakers
Rear Left Speaker (+) Dark Green / White 4 Re-Pin / Connect to Green
Rear Left Speaker (-) Brown 10 Re-Pin / Connect to Green / Black
Rear Right Speaker (+) Light Blue 5 Re-Pin / Connect to Purple
Rear Right Speaker (-) Yellow 12 Re-Pin / Connect to Purple / Black
Factory 10 Pin Harness Wiring Diagram
Speaker Location Factory Color Pin Location (from plug side, not wire side) Aftermarket Harness Re-Pin Color
-Dash Tweeters
Front Left Speaker (+) Pink 8 Re-Pin / Connect to White
Front Left Speaker (-) Purple 7 Re-Pin / Connect to White / Black
Front Right Speaker (+) Light Green 2 Re-Pin / Connect to Gray
Front Right Speaker (-) Dark Blue 6 Re-Pin / Connect to Gray / Black
-Rear Deck Tweeters
Rear Left Speaker (+) Black 3 Re-Pin / Connect to Green
Rear Left Speaker (-) Yellow 9 Re-Pin / Connect to Green / Black
Rear Right Speaker (+) Red 10 Re-Pin / Connect to Purple
Rear Right Speaker (-) White 4 Re-Pin / Connect to Purple / Black
If you have any questions, leave a comment below! Be sure to like and subscribe!
Amplifier Install Parts (Amazon Associate Paid Links):
*NVX N Series 5 Channel Amplifier: amzn.to/3Dq9j34
--Recommended 5 Channel Amplifier: amzn.to/4bAqKjJ
*JBL Harness Bypass: amzn.to/3E0Rdpi
*4 Gauge Amplifier Wiring Kit: amzn.to/31f0r2U
*Metra 9 Conductor Cable: amzn.to/3xK4PSk
*Skar 10" Ported Subwoofer Box: amzn.to/3JZXEwd
*Skar 10" SDR DVC 4 Ohm Subwoofer: amzn.to/3njZrmi
*Skar 4 Channel RCA Cables: amzn.to/3FhmIeM
Radio Parts used in this install (Amazon Associate Paid Links):
*Dual DCPA701 Double Din Radio: amzn.to/3jzm2cF
*Metra 95-8218S Double Din Dash Kit: amzn.to/34qhvEV
*Crux SWRTY-61J Wiring Harness (Retains JBL): amzn.to/2T1yw2m
--If you don't have the JBL factory system, use the SWRTY-61S harness: amzn.to/3iqHcK7
*Natika Backup Camera: amzn.to/3csfJn3
*(Optional) USB/USB adapter: amzn.to/2URnTA0
*(Optional) RCA to 3.5mm Jack Adapter: amzn.to/3wakBW4
Disclosure: As an Amazon Associate I earn from qualifying purchases
Негізгі бет 2007 - 2011 Toyota Camry 5 Channel Amp and Sub Install
No video
Пікірлер: 76