This video actually makes me confident to do it myself. Many other videos are chaotic, the camera is all over the place and the instructions are wonky at best. Great job.... My 08 civic is having PS cut in and out so I'm thinking this is the fix....
@user-el3bq4yu2r
2 ай бұрын
No lift necessary??? Wow. Thank you...this was very helpful and is gonna save me over $1000 from not having to take it to the shop. Cheers!
@jonathandear8275
4 жыл бұрын
Like the calm narration
@Thr33Sh33ts
2 жыл бұрын
Exactly what I needed to know whenever I decide to tackle this, as my ps system is just pissing fluid at this point. Now I just need a covered garage to work in so I'm not pissing off the HOA...haha
@ELLY333777
3 жыл бұрын
Great Job! I looked at other videos, but this was the best one on how to do it and test it safely. Is the subframe very heavy to lift onto jack?
@rkystokes
3 жыл бұрын
Its not too heavy, just very awkward. It would definitely help to have another person to guide it as you remove and reinstall.
@caadorobinson3167
3 жыл бұрын
Good thing me never listen to nth this video say ..only thing I pull on my car .was the muffler system
@jimmarten626
3 жыл бұрын
I noticed that you didn't flush out the power steering systems fluid prior to installing the new Rack, most companies will void the Rack and Pinion warranty if you leave out this procedure. All in all you did a great job of explaining how it is done.
@miguelvargas6073
2 жыл бұрын
How do you flush it ? help
@jordanb2769
2 жыл бұрын
It's electronic. Lol no fluid
@bigjohnson7415
2 жыл бұрын
@@jordanb2769 Uh, power steering "Pump", not electronic. I think the 2012's and up are.
@kooppoopmax5812
2 жыл бұрын
almost all the fluid comes out when you take off the 21 mm bolt, he topped off his power steering fluid reservoir regularly while bleeding the system off camera
@theejoeylee
Жыл бұрын
@@bigjohnson7415 The Si is electronic. All R18s 06-11 are hydro
@anthonymoore8480
Жыл бұрын
Excellent job, well done!!! 😇
@timmgd7746
4 жыл бұрын
Only good video on this thanks! Got er done
@PolKsio
4 жыл бұрын
Legend.
@JayM-bu2wp
21 күн бұрын
Is this the same procedure for a si model
@NaturallyFitNow82
3 ай бұрын
Whats the piece at 14:00 called? Goes into line and is transfered. Cant find it online.
@Mpreston89
2 жыл бұрын
Great vid thanks
@ronygbo3290
7 ай бұрын
How long did this job take you from start to finish
@ozzyallen9075
Жыл бұрын
If I need to change just the subframe do I still have to drop the rack??
@awautoworks4426
4 жыл бұрын
Thank alot
@RaZilla420
2 жыл бұрын
Do you ever replace the o-ring on one of those aluminum plugs? Where did you read about those leaking? Because mine does and I need more info.
@PhillipMaster
Жыл бұрын
how long should this procedure take me?
@guillaumecaron5362
4 жыл бұрын
Hey what’s the name of that part that you unbolt at 9:12 ?
@rkystokes
4 жыл бұрын
Hi, it is a lower torque rod.
@nathanshinn2016
Жыл бұрын
Anything g to note or avoid doing, I'm doing my turbo on my 2.2 ctdi atm and need to drop subframe, it'd first time on my own I need to get to cat and downpipe bolts that are not accessible from top as its such a stupidly placed engine
@TelstarElectronics
Жыл бұрын
How much did that subframe with rack weigh?
@guillaumecaron5362
4 жыл бұрын
how much time did it take you to complete the full repair ?
@rkystokes
4 жыл бұрын
It took a couple hours. I took longer than I would have due to trying to film as I was doing the repair. I would also recommend having someone to help. Trying to drop and lift the subframe by yourself is a real pain.
@gavvinschubie4253
2 жыл бұрын
How do I find the rack because when I went to order one it showed two that fit mine which is just a year above yours and it showed two with different lengths and different input shaft lengths
@kooppoopmax5812
2 жыл бұрын
different trims. Ex, Lx, Si, SiR, Hybrid
@JaidenStylezTV
4 ай бұрын
WHY DIDNT YOU SHOW US HOW TO TAKE OUT THE 21MM ..YOU LEGIT CUT THAT PART OUT.
@SpeedyNinja
16 күн бұрын
Did you ever find out how? I am trying and can’t get it
@JustaMan1225
3 жыл бұрын
Would this be the same process with a sedan 07
@rkystokes
3 жыл бұрын
I assume the process would be the same if not similar. I have never done a rack on a sedan.
@JustaMan1225
3 жыл бұрын
@@rkystokes hey I’ll lyk how it goes, thanks man I got little more confidence now.
@savii4146
2 жыл бұрын
do i have to torque the subframe bolts? or i can just put them in tight?
@eddiekatura4465
2 жыл бұрын
torque them
@cognac8297
2 жыл бұрын
My passanger side wheel is bouncing. Changed everything chasing the problem. At like one wheel only. Bounces and when I let off. I've raised the car and gave it gas and watched the wheels I see it bouncing. I changed everything nothing worked. Now it feels like the other side. And I have OEM parts to the coupe Civic. Many tires many wheel's. All the components. Even used salvage yard stuff just to see if it would fix it for cheap then buy the OEM part if it was .but nope nothing works. Rotors the whole assembly. Brakes, tie rods ball joints . Many balances and alignments. Shocks struts. Camber bolts. More different wheels more tires control arms a few of them .axles a coupe of them. The half shaft I never changed , , the control links I never changed. The rack and pinion I never changed.. the half shaft from engine to the first bearing ,I didn't change. then to the rest of the axle I changed manual transmission from first bearing to the wheel i changed.. and the struts ,shocks. .bushing to them. Anyways. The wheel is bouncing. Hardn motha trucker still.
@PAT4SAM
3 жыл бұрын
how many kilos that sub frame?
@AChav92
3 жыл бұрын
What brand is the new steering rack?
@rkystokes
3 жыл бұрын
Its was a NAPA autoparts steering rack.
@AChav92
3 жыл бұрын
@@rkystokes thanks. Is it still holding up?
@rkystokes
3 жыл бұрын
@@AChav92 It was holding up when I had the car. I ended up downsizing so I sold the car a little while ago. They do have a limited lifetime warranty on them from NAPA.
@AChav92
3 жыл бұрын
@@rkystokes do you know the torques for the subframe bolts?
@miguelsoto9579
3 жыл бұрын
It’s better to pull the frame down? Or just the R.p it self . Wht better
@rkystokes
3 жыл бұрын
I have never done it another way before so I cannot say. If you can fish it out without removing the frame then I would say go for it. I find it easier to remove a few extra things to have more space typically when I work on stuff.
@miguelsoto9579
3 жыл бұрын
@@rkystokes ok thank man it was I good video
@caadorobinson3167
3 жыл бұрын
Ppl only thing u need to pull to remove u rack and pinion..is you muffler system
@eddiekatura4465
2 жыл бұрын
exhaust does not need to be dropped
@bostongorge3507
Жыл бұрын
Why do you no show how exactly the drive shaft was takin off an put back on or whats the purpose of the yellow plastic piece as if its not important do you only gotta keep the steering wHeel straight? Or does in not matter how it lines up with the steering rack ??????? its like the most important smallest things yall always leave out lmao
@dilpreetsandhu9052
3 жыл бұрын
How much does it cost?
@nicholauscucurella3002
3 жыл бұрын
Can I just pay u to do it 😂 I’m in Tampa
@mikea5205
3 жыл бұрын
lol same here I need mine done. I hate these damn 8th gens I just wanna fix mine, sell it and buy a 9th gen that has electric power steering, no fluid.
Пікірлер: 58