EX25 maybe helps you. First replace 3V battery in your key, and try to start. Then check auto accumulator. If still no start, disconnect "-" on accumulator and do diagnostic. Check power fuses (140A to 60A), they are just on accumulator "+". Then check small fuses (left front seat, near left leg, and fuses in IPCM module - it is near accumulator). If all fuses are ok, you should check also few relays connected with ignition and fuel pump. So you are here ------ No engine start, but driver boards lites on, ACC and fuses seams ok, after you switch on - Intellegeng Key lamp on board and motor fans switches on. This means ECM block is in big error, or immobiliser block doesn't give ECM block enable signal for safe start. Most probably it is because of bad contact or water on in CAN-line between IPCM, ECU, BCM, Immobiliser. You DONT NEED new ECU or rewrite new keys. Dont forget "-" ACC should be disconnected before you touch electric. Just unplug and plug connectors to this modules, if you see a dirt\ water - clean it. IF ther is a water on you carpet - check BCM and Immodbilizer first. Otherwise - dismount IPCM and take it home. Just leave it for a day, to make dry, if you dont have electric skills and dont want to check it inside. Also, there is one more critical place, it is big wire line under accumulator (dismount ACC, dismount plate under it).
@kluethomas2052
7 ай бұрын
Would you travel to Queens I'm having similar issues on my G37
@oscarjosuelopezmarquina966
4 ай бұрын
@BestCarFixes I have the same problem with my 2009 g37x, I would like to know if I have already solved this problem. Please your answer would help me a lot.
@LosDaGhost973
Жыл бұрын
I just had this problem. Underneath the steering wheel pull the plastic out and unplug and replug the motor of the steering wheel. Not sure what its called...steering wheel locking control module.not sure. Mine after a.bad jump start to someone's car and I distorted the module and needed to reboot it.. the problem is underneath the steering wheel
@TokesRMV
Жыл бұрын
How did he start the car?
@acadian101
Ай бұрын
i intermitenly have this problem with my 08 G35x ,, i have 2 fobs and both baterys are new in the, and they both lock , unlock the car but when you press the break and ignition , the lights all come on but the key symbol in the dash is lit and car just wont start,, you know the fob responds as the doors lock or unlock ,, and the 2 or 3 times the car has done this to my , i would play with the steering wheel tilt motor switch and then press the break and igniton and eventually it will start back up and i can go a few months or weeks without any issues ,, very weird
@v36bergy
8 ай бұрын
what did u to to bypass and start the car
@Fayzooooo
Ай бұрын
Hello did you ever figure this issue out ?
@quandaledingle6875
Жыл бұрын
check the fuzes coming off the positive battery terminal, my father had no crank issues because one of the 4-5 were out
@BestCarFixes
Жыл бұрын
Thanks a lot I will do it
@Kamcik90
11 ай бұрын
What autel computer You are use?
@cpraudi
13 күн бұрын
What was the fix ?
@jorgemat8080
Жыл бұрын
Start solenoid, start relay.
@BestCarFixes
Жыл бұрын
TRUE
@yuhfiknowtv
Жыл бұрын
HOW CAN I CONTACT YOU?
@BestCarFixes
Жыл бұрын
13472281875
@RobertoHernandez-lt6hg
Жыл бұрын
@@BestCarFixes my car is having same problem can you help me out?
@user-lx9su4gw6g
3 ай бұрын
Aye who kno this mechanic number
@BestCarFixes
3 ай бұрын
3472281875
@bankkrollMari2710
3 ай бұрын
I had this issue wen my car didn’t crank one nite I got a qwick jump came on next day didn’t crank next day jumped for 10 min came on hrs later press button all lights come on no crank
Пікірлер: 22