That give me another perspective. Trying to do one on a GLE with the M276 Bi-turbo and was on the impression I need to drop the catalytic converters. I never thought about the drive shaft. I take a look at it next time I put the vehicle on the 2 post lift. I have done it on the M113 motors and that you get it from the top on the back of the motor.
@geraldmcgowan1526
Жыл бұрын
thank u for this info bless u for your content
@kennytvkennytvkennytv
7 ай бұрын
You’re welcome I’m glad my video help
@arascars4954
Жыл бұрын
Thank you this was great
@tomb375
Жыл бұрын
I was able to change the Crank Position Sensor from above. Still a BIG Pain in the Ass but didn't have to remove anything. Well engine cover was removed and it helps to have a small hand. My hand and back was killing me after.
@MrJboosted
10 ай бұрын
Curious how.. I’ve been trying
@kennytvkennytvkennytv
7 ай бұрын
I’m glad my video helped you
@tomb375
7 ай бұрын
@@MrJboosted I was laying across the Top of the Engine, cursing and pissed. I think I used a 1/4 drive with a swivel and extension. I had no choice I was on the side of the road. It will be super difficult. I also had to replace the Fuel Pump. That might help if you have a crank but no start. Check your fuel pressure. I changed both and no more problems. Scan tool only showed Crank Position Sensor, but my Fuel pump was also dead truck had about 150,000 at that point. Hope this helps. Thanks.
@A.Musa76
3 ай бұрын
@@tomb375 If you let the sensor cool down. You can start it and limp it home. I always keep one of my scanners inside the vehicle at all time. It maybe possible to get it from the top. I have done it on the M113 motor (5.0L V8). The first time I was cursing, could not find the bolt/sensor (had to use a mirror). Second time I done it was allot easier. On the M276 Bi-turbo I gave up trying to get it from the top.
@tomb375
3 ай бұрын
Also, just a tip, I had to replace the Fuel pump. That was the real problem. I hope this helps someone.
@ardaryllsmith2740
4 ай бұрын
How did you remove the drive shaft?
@pashkoskoda3862
2 ай бұрын
Which side is A Circuit Low Bank?
@kingofnewyork3
2 ай бұрын
What code was it giving? I’m having the same issues but the code is saying bank one a
Пікірлер: 16