I spent twenty years in the garage and can honestly say I wish I had 10 lads as good as you. Brilliant video step by step process. Well practised and knowledgeable and to do all that on your back fair play to you
@WMCS
3 жыл бұрын
Your review means a lot coming from someone who’s been in the trade for that many years ..,, thanks for the support and word of encouragement.., really appreciated ✨🍻🍻🍻
@sendheron1
3 жыл бұрын
Great video no messing about or no annoying music, just showing you exactly what's involved, some strength too, to be able to lift that gearbox & put the bolts in at the same time😳wow best part of the install easy, great job👍👍👌
@WMCS
3 жыл бұрын
They’re not that heavy once you do one or two .,
@CrazyHHO19
3 жыл бұрын
i get well tired after 2-3 hours of work on cars...clutch take much longer and you still had plenty strength left in you..its not a small job and you managed to film it.well done to you rome salute you..
@WMCS
3 жыл бұрын
That’s great you realise the work that has been put in to get these repairs on video .,, thanks for the support
@deninsrmic4165
3 жыл бұрын
Laborious but amazingly very accurate undertaking which you managed pretty well Kevin. Thanks for recording it on VW Passat B6. I watched your recordings on B7 and other VW models but this is the first one on B6 which is brilliant. Thank you very much working on my car here Kevin, you helped me out tremendously and car drives so smoothly now. I am glad I have hired you. Keep up good work. Many thanks for you labour and help. 👍👍👍👍👍👍👌👌👌👌👏👏👏👏. Merci.
@WMCS
3 жыл бұрын
Thanks for a great review. It was a pleasure meeting you and having a chat .., all the best for the future. Kind regards. Kevin-Albert.
@kmcca08
3 жыл бұрын
One of the nicer clutches to do, most time consuming is the drive shaft bolts! Awesome job as always!
@WMCS
3 жыл бұрын
Yes it takes a little bit longer than the conventional driveshaft. But nonetheless a great design ✨✨🍻🍻🍻
@iulianconstantin221
3 жыл бұрын
Good job, thanks to your presentations I managed to replace my own clutch, respect!
@bahatyrishmatov5721
3 жыл бұрын
professional. genius. I wish you success in your business. thank you for the video.
@WMCS
3 жыл бұрын
Thank you for the encouraging words ✨🍻🍻
@roy9727
3 жыл бұрын
Iv'e been in a mechanic since i left school in the late 70's and always had the facility for doing this kind of work on a workshop lift, and in years gone by iv'e done the odd clutch change on someones drive, and once in the pouring down rain, that was unpleasant to say the least i couldn't/wouldn't do it now (I'm in my late fifties), we don't see your face but i suspect your a young man, and that's what it is, its a young mans game, it's damned hard work doing a clutch change on the floor, hat's off to you mate, all the best..
@WMCS
3 жыл бұрын
Hey Roy. Always great to hear from a fellow mechanic.,, thanks for taking time for sharing on our forum. I’m young enough. 43yrs. But reckon I can smash this till my early 70’s. 🍻😁 The mask is purely for protection. The consequences of being exposed to oil and clutch dust can be detrimental. So no chances are taken here .,, especially doing it on a daily basis. .., Hope you’re keeping well .,, be sure to subscribe for more videos. 😁✨🍻 Regards Kevin-Albert
@RoarFossdal
3 жыл бұрын
Thanks to this video I was able to change flywheel, clutch and pressure plate 😃 fantastic video, even bleeding went well! Lots of respect and thanks from Norway 👍
@MekanixFlow
Жыл бұрын
Hadde du løftebukk Roar, eller tok du det med akrobatisk letthet som vår superhelt her?
@RoarFossdal
Жыл бұрын
Det ble uten løftebukk, men med god hjelp av en som sto over motorrommet og hjalp til å løfte den av og på. Den girkassa var tung nok, så det er imponerende å se supermann løfte girkasse som om det var en liten startmotor 😅
@MekanixFlow
Жыл бұрын
😂👍 Ja for oss vanlige dødelige så er det nok ikke dumt med litt hjelp heller nei 😂👍👍
@t5jerry
3 жыл бұрын
very clever, "pre-soaking" the bolts before removal, sign of a TRUE mechanic.
@WMCS
3 жыл бұрын
✨😁🍻🍻.,, always. I go round two or three times and keep soaking them up. I’m surprised you noticed that 💫💫
@t5jerry
3 жыл бұрын
Have a couple of questions if you don't mind. 1. Will you fit a clutch kit that the customer supplies ? 2. Which in your opinion is better quality, SACHS or LUK, I think the Sachs clutch is slightly more expensive, but I've also been "told" they are better quality ??
@resistireland694
2 ай бұрын
Without doubt, the best instructional video I have watched on the tube to date 👍 A job I will surely be taking on with my B6 soon as I have a rattling noise in there somewhere after the first start of the day until the clutch is depressed! Thanks so much Brother for the upload. Wishing u and yours many blessings 👍🇮🇪
@fillo1971
Жыл бұрын
Tutta la sequenza sembra di una semplicità unica, ma non lo è affatto. Sei un maestro e se non fosse che io ti scrivo dall'Italia, sarei assolutamente senza ombra di dubbio il tuo cliente assoluto. Sei un Maestro. Grazie per i tuoi video. 👍🏻💯💪🏻
@superuser87
3 жыл бұрын
You make it look so easy bro. U do it like a king. Best video on KZitem. Thank you!
@ScarbadosSlim
2 жыл бұрын
I've got this exact job to do on my 2008 1.9 b6 when the parts arrive, but I've gone for the single mass conversion instead. Thanks for another fantastic video. Just like you I'm doing it on the driveway, so let's hope I find it as relatively straightforward as you make it look.
@WMCS
2 жыл бұрын
Ouff..
@ScarbadosSlim
2 жыл бұрын
@@WMCS I did the clutch on my old Mk2 Mondeo diesel on the driveway and also did a complete Subaru EJ22 conversion in a 1972 VW camper. I'm very experienced at rolling around on the drive, swearing and losing tools. Just hate the way this shit always seems to need doing in the middle of winter. Oh well... If only every clutch was as easy as on my old Cavalier.
@swms9679
3 жыл бұрын
Another awesome video, i just changed the clutch on my Corsa using your videos as a guide, couldnt have done it without it, thank you Kevin!
@WMCS
3 жыл бұрын
That’s great John.,, glad the video came through for you .,,
@swms9679
3 жыл бұрын
@@WMCS it was by far the hardest job iv done on a car but i enjoyed it, you make it look like its nothing 😀
@rodrigocampos5438
3 жыл бұрын
Hi , you did my Van Today, really good service, great man!!! Really Professional!!! 😁
@WMCS
3 жыл бұрын
Rodrigo..🤩✨✨..,, by the time tour son mentioned it I was nearly done. Otherwise I would have filmed it 🍺🍻🍻..,, it was a pleasure .,, and it drove lovely afterwards
@milanlilic8419
2 жыл бұрын
Majstor,puno si mi pomogo tako da smo mnogo naucio,i skino i namestio menjac kao ti! Hvala,pozdrav iz Srbije!
@capitanpiruleto
Жыл бұрын
Right now, im stuck on the bolts on the flywheel on my passat. Lets see tomorrow....the hard part its to put the gearbox back. I love your move with the leg on the jack while hanging the gearbox.
@1b9e7n3z
3 жыл бұрын
Congratulations, mechanic Stig, you do a great job only I saw, maybe Im wrong, you greased a little bit more than normal the primary, everything is amazing and thanks for the video, very motivate, regards by Spain
@WMCS
3 жыл бұрын
Yes a little bit more love is being given to these gearboxes 🍻🍻😁
@greensboy1
2 жыл бұрын
hello, I wanted to thank you that without you I would not have dared to change my clutch of my volkswagen passat motor bkp year 2006, thank you very much for your videos, it has helped me to change the clutch without problems, thanks
@WMCS
2 жыл бұрын
Thanks for the feedback. Really glad to know the video came in handy. 🍻
@pierrevilliere7921
3 жыл бұрын
Congratulations kevin , the road mecanic teacher !!! we believe when we see the video that the work is easy but !!!! your the best !
@MrRednhot
3 жыл бұрын
@ Kevin-Albert Williams This is the best video i have seen in my whole KZitem life: I love that you do not say anything in the video, but only point because you can get so damn confused if you also have to listen to someone who explains what is being done. I'm going to change the clutch and flywheel on my 2007 Passat 2.0 TDI. And this video has really made it easier for me. Really Good Video ....
@aston0708
3 жыл бұрын
Amazing the way he pops all types of gearbox in a matter of seconds,,,,,and then gives a little smack on the bot,,,lol
@mixandfix7
3 жыл бұрын
You make it look so easy i had to fight it two people to put it back , great job and thanks for helping vid
@cupo6178
2 жыл бұрын
Profesionalno odradjeno,uzivao sam gledajuci video👍👍👍👍👍👍
@paddrivers
3 жыл бұрын
The Master....anyone who think this games easy, give it a go on your driveway .👏
@WMCS
3 жыл бұрын
It’s not for the faint hearted is it Phil .,, that’s where we separate mechanics from technicians 🍻😁✨
@ivandrago1267
3 жыл бұрын
@@WMCS yeahhh! 😉☺
@jemmace2586
3 жыл бұрын
@@WMCS My Cousin is a Mechanic, he's worked at Mercede's, Porsche, VW... all of them, over the years. He says the same as you Kevin, There;s lads who swap parts and the one's who truly know their craft. I do my own work on my car, confidence permitting... using a 3 tonne jack and stands, not easy at all and certainly not the standard or speed you work at. Hat off mate, you're always efficient and dilligent.
@dantolhurst7802
3 жыл бұрын
I did the c1 last week off the guide much appreciated.. u made it look easy hahaha
@pauljblo
3 жыл бұрын
Is red rubber grease the best one to use for the clutch spline? Wondered what grease to buy?
@ademiarmin
3 жыл бұрын
31:31 Did you guys noticed in every video when @Kevin put the new clutch in, he do a circle and slap that clucth. (like good boy) ! . haha :D:D:D
@WMCS
3 жыл бұрын
🍻🍻✨😁..,
@diypapie8428
3 жыл бұрын
Yeah he does that also stroke's the hood when openings or closing like ( be a good boy) Only can say respect from a bus mechanic 🍻
@abrahamvelazquez3852
2 жыл бұрын
Decente AND hardwork put food on the table, blessings
@WMCS
2 жыл бұрын
Thanks mate.
@adrianalbertopanuccio8497
3 жыл бұрын
Very good Kevin !! Warning gear box man !! Heavy and dangerous manipulation More you have muscle and inteligent . And more ...simplicity !! Good worker !! Salutations of argentina !!!
@WMCS
3 жыл бұрын
Saludos 🍻🍻✨✨🥩
@fizaraja2205
3 жыл бұрын
I love watching your videos and in fact i did change yaris clutch cuz of your detailed video’s. Top Man 👍👌
@WMCS
3 жыл бұрын
Thanks babar ✨✨✨✨☕️☕️🚬
@anthonyoreilly3983
2 жыл бұрын
Excellent job Excellent video Excellent camera work
@WMCS
2 жыл бұрын
Thanks for the feedback
@akhlaqsawar7683
3 жыл бұрын
Fantastic video mate I might attempt replacing my clutch after watching your video 😃
@WMCS
3 жыл бұрын
An extra pair of hands might come in handy lifting the box in/out they weight a tidy sum ..✨✨
@bensnare1181
3 жыл бұрын
An other cracking video but wasn't the same without the rain lol good job Kev
@WMCS
3 жыл бұрын
Ben looking at the forecast you shouldn’t be too disappointed with the next video., We have summoned the 🌧 rain gods🤩🍻✨
@jakehollins9836
3 жыл бұрын
Hi just a quick one, I'm taking this job on myself, but I've been told I need the self adjusting clutch tool, although in the video, I see you use only the clutch alignment tool, how necessary is the self adjusting tool? The tool is supposed to give the flywheel the correct preload on to the flywheel I've read. Thank you an kind regards
@WMCS
3 жыл бұрын
Jake to be honest I haven’t used one. Never had any problems to date with just the clutch alignment tool.
@jakehollins9836
3 жыл бұрын
Top man thank you, hopefully mine goes as smooth as this 🤞🤞 one of the easier ones I'm led to believe. Great work buddy, you do a great job of positioning the camera so we can see exactly what's going on. Keep up the great work !
@ivandrago1267
3 жыл бұрын
You are an iron man ! How you can do this ? I changed my clutch on fiat grande punto following your videos, but when I tryed to lift the gearbox with my body like you .. I lost !! So after I used a pallet truck an some piece of wood to lift the gearbox and I finisched the work but ... it was a hard job ! Top Kevin, I like very much your videos !
@WMCS
3 жыл бұрын
Ivan they are a bit heavy some of the boxes. But for a fiat I’d say it’s not so bad. But glad you managed to use some initiative to get it back on. Well done to you ✨✨✨🍻✨🍻✨
@EnemyDwarf-TTV
3 жыл бұрын
please say you used a torque wrench on those wheel bolts because i didn't see one in your hand the whole video.. just the Buzzy gun.
@PLASTERKINGCOUK
3 жыл бұрын
top graft there mate really enjoyed watching i bet you were buzzing when wheels go back on ooooof
@WMCS
3 жыл бұрын
Render king to be honest ., I get that buzz when I turn up fo the repair. There’s always a level of adrenaline rush ...
@PLASTERKINGCOUK
3 жыл бұрын
@@WMCS yes I can tell I work outside too rendering obviously my attitude is the same right let's have it... If you don't feel that you shouldn't be doing the job... Really good work mate I've watched 5 hours today and loved it all buzzin off you haha. Keep it up
@sudinebabz8651
3 жыл бұрын
the great clutches warrior !
@WMCS
3 жыл бұрын
🎉😁🤩✨.., salut sudine..
@sudinebabz8651
3 жыл бұрын
@@WMCS salut Kevin , c est toujours un plaisir de te voir travailler 👍🏽
@charlesdale5965
3 жыл бұрын
Wow! Gotta feeling you've done this before.
@WMCS
3 жыл бұрын
Once or twice 😁🍻✨
@Liveforeever
3 жыл бұрын
You can't do this job this quick and this easy without going to the gym
@WMCS
3 жыл бұрын
No gym mate. Never stepped into one of them temples before😁☀️🍻
@Liveforeever
3 жыл бұрын
@@WMCS nah you must surley do some form of excercise maybe not in a gym. Your upper arms are shaped like you lift though.
@WMCS
3 жыл бұрын
Honestly mate … no exercise at all.. I’m as the creator intended
@wayneconnell631
2 жыл бұрын
You are the freakin man Kev..🙌🏾🙌🏾🙌🏾💪🏿💪🏿💪🏿💪🏿
@marioaltrichter2262
2 жыл бұрын
Thanks you help my so much. Great Job I come from Bayern Germany
@MsMicheal12345
3 жыл бұрын
editing brilliant and top job there kevin
@WMCS
3 жыл бұрын
Thanks for the feedback.,, and happy new year
@jemmace2586
3 жыл бұрын
Great job KAW! how it's done and making the hard way (on a driveway with no lifts or compressor's) look easy, which it msot certainly isn't! Well not to us mere mortal's or the aspiring D.I.Y'er! :)
@WMCS
3 жыл бұрын
Jem that’s the reason I make the videos so the weekend but serious DIY’ers can have a good guide to tackling their own repairs.
@joseantoniorodriguezcontre3106
Жыл бұрын
Un gran video, muy laborioso y mucho trabajo para cambiar el embrague. Felicitaciones desde España
@WMCS
Жыл бұрын
Merci
@SroUnique
3 жыл бұрын
it wouldn't be a major service without this pet and smack on 31:30 :D
@martinjones849
3 жыл бұрын
Yet another excellent job Kevin
@djamelmanane3149
3 жыл бұрын
German are the best .very good job.
@dt0624
3 жыл бұрын
this is pohang sout korea . im enjoying the video you uploaded. im on the vw cc tdi 2010 model. i have a question which country is That. Thank you see you next time
@WMCS
3 жыл бұрын
Hi Pohang.,, I am here in these United Kingdom 🇬🇧
@dt0624
3 жыл бұрын
@@WMCS take care of your self. Take a hot bath often.
@stephenyoung5667
3 жыл бұрын
I'm intending having a go at my Alhambra clutch soon. Your vids have been a great help! The tracking will need doing once everything is back in place won't it?? How about a Sharan/Alhambra next time one comes up?! 👍
@WMCS
3 жыл бұрын
I will try and find one for you. But otherwise the engine and gearbox is exactly the same as this one .., no tracking will be required .., ✨✨🍻
@stephenyoung5667
3 жыл бұрын
@@WMCS Excellent, thank you. 👌👍
@MOHAMEDHUSSEIN-pb2br
3 жыл бұрын
You are brilliant & really Professional
@WMCS
3 жыл бұрын
Thank you Mohamed ✨✨
@dervincent1054
3 жыл бұрын
KEVIN, the cover photo of your video :" 2005 Rover 75 1.8L Petrol Clutch Replacement" you look like Batman, black clothes and mask. Good job man
@WMCS
3 жыл бұрын
Thanks man .,, working outside directly underneath and in close contact with dirt .,, the correct PPE is a must ..,
@sudinebabz8651
3 жыл бұрын
👍🏽👏 again the clutches warrior ! But how much does this thing weigh , the gearbox ???
@WMCS
3 жыл бұрын
This one was a big baby .,, I had to proper cradle it. Easy 70kg I’d say
@sudinebabz8651
3 жыл бұрын
@@WMCS Waou ! 💪bravo 👏👏👏
@overtaxed3628
3 жыл бұрын
Which one is better, Luk or Sachs !?
@tripode13
3 жыл бұрын
Great video, congratulation Master!
@liammorris8756
2 жыл бұрын
Hi Kevin, this the same as my Seat Exeo 2.0 tdi? Amazing work pal.
@WMCS
2 жыл бұрын
That’ll be the same engine
@carlosnavarroroldan1872
3 жыл бұрын
Tapón del aceite puesto con una pistola de impacto ??? 😓😓
@paulbidwell6713
3 жыл бұрын
Great video Kevin , stay safe 👊
@robertklein9190
3 жыл бұрын
Great job, but I would have used the Milwaukee 3/8 & sometimes a 1/4 Hex impacts for the tight spots instead of that big 1/2 inch impact with those MAC swivels. You can't get in a F-350 diesel with that 1/2 inch impact.
@baks6890
3 жыл бұрын
Nice job en very instructive 👍👍
@ioantudorchis984
3 жыл бұрын
Price to change my steering wheel clutch kit, Passat B6 2008
@MasonIsAPro
3 жыл бұрын
Hi mate is the slave cylinder on top of the gearbox as mine will not go in to gear but there is still pressure on the clutch pedel its tbe same car
@colin5064
3 жыл бұрын
If you owned a VW/AUDI which required a new DMC would you go Luk or Sachs based on your experience.Which of the two brands would you chose for quality and longevity? If anyone knows its probably you. Cheers Col.
@WMCS
3 жыл бұрын
Colin for VAG engines I will always go for LUK it’s more expensive than SACHS., Reason being *LUK’s pressure plate has an automatic adjuster built in between the contact surface and fingers .,, *LUK’s pressure has designed a vent system in the plate cover to allow maximum airflow to keep the friction plate cool., Sachs hasn’t got the extra features which in my opinion *causes the clutch system to heat up and as a result damages the thin spacers in the flywheel., *on very long journeys the pressure plate springs becomes rigid which makes the clutch pedal feels hard. A lot more pressure on the slave cylinder. For a Non DMF I will always go for Sachs as the flywheel design allows air to flow freely through the cut outs .,, What I’ve found over years clutch wears 50% Quicker due to lack of air flow .,
@colin5064
3 жыл бұрын
@@WMCS Hi Kevin, thank you so much for sharing you experience and hard won knowledge.I will be following you good advice and buying a Luk DMC in the future for my Golf Mk 6 1.6 tdi cayc.I very much appreciate your detailed answer,thank you for taking the time. Stay safe and strong in your work,glad you always use double axle stands and removed wheels under the vehicles you service.
@fabifabi7856
3 жыл бұрын
Muy bueno amigo!! El tiempo del cambio es el real del video o esta editado el video?? Muy bueno sigue asi!! Saludos desde argentina👏👏👏👏👏
@robinjitsingh3733
3 жыл бұрын
You have petrol in that mini pump?? Anyway you are one of the best man and how much muscle you have Ahahah
@NA-we5qu
2 жыл бұрын
Any tips for undoing the flywheel bolts without an impact?
@Batman111-q3r
3 ай бұрын
Hi I’ve got the vw Passat o7 b6 does the gear box have to come off to change crank sensor
@offbeatwarble
3 жыл бұрын
Good job, on a side note, how do you find your van, has it been reliable? Have you had the dreaded injector fault?
@WMCS
3 жыл бұрын
So far the van has been good as gold .., Considering it’s only a 1.5, because I drive very long journeys the likelihood of the engine getting clogged or injectors failing is almost zero to none .., One thing with Piezo injectors they like heat to work efficiently and long range .., I drive on average 2 hours each way. So it’s very unlikely to get clogged up.
@dragan216
3 жыл бұрын
Great video. Which milwaukee do you use?
@WMCS
3 жыл бұрын
It’s the M18 Fuel.
@matrix7725
2 жыл бұрын
Wie viel kostet es? Der Preis für das Stück mit der gesamten Installation? Mein Auto muss gewechselt werden.
@adrian-stefan3053
3 жыл бұрын
Hello! I watched with interest how you changed the clutch to the 2007 Passat. Great!👌 I would have 2 questions: 1) Last week I changed the following at my Diesel Passat (BKP 2005) to a service in Austria: Reconditioned gearbox (6-speed manual HDV), new complete clutch kit from Valeo and shift cable - new (3C0 711 265AD). The company from which I bought the reconditioned gearbox (Getriebezentrum Europa) , expressly requested in the Warranty Certificate that 3.8L oil be poured into the gearbox because the gearbox was completely disassembled and reconditioned (those from VW in Exchange say 2,3-2,4 Even if the box has been completely disassembled), The same Company says further: it should be changed after between 500-1500Km and again after 20000km, on the contrary, I do not benefit from the guarantee. What do you think? What do you think about quantity? Why is there such a difference from what VW says? Have you ever encountered something like this? 2) Now when I start from the spot, while I leave the clutch slightly and accelerate at the same time, in the middle of the clutch pedal stroke, there is a tremor (the car shakes a little at that moment, which is also felt by the other passengers). The same thing happens when I want to stop and apply the clutch before applying the brake (speed of 3-5 km / hour). At the service I complained about this fact which was not present before and He was told to drive 1000km, until the components run in because they are new (I didn't feel anything before because there were lose) ... He said he also made the necessary adjustments to reset the cables / gearbox. However... Today I took the car out of service and I keep thinking about these 2 problems. From what can it be? Have you ever faced such problems? Thanks! 👋
@WMCS
3 жыл бұрын
Definitely follow the gearbox company’s instructions. This will make sure all the gears are properly coated with oil. Then drain and re fill with correct amount. Did you change the clutch kit and flywheel..?
@adrian-stefan3053
3 жыл бұрын
@@WMCS Sure, as I wrote I changed everything starting from the hydraulic pressure bearing to the double table flywheel everything new from Valeo (because the kit from Sachs arrived incomplete-without flywheel and the mechanic said to mount it) . Today I was to VW to change winter wheel and he said that is not normal. It's a problem with clutch- but what? They can't get involved in the work done by another service, but they can mount them again if I want - for a fee of course.
@tinclosing4283
3 жыл бұрын
El número 1...👌👌👌... The Number one
@ianwilson8264
3 жыл бұрын
How much to change a thrust baring in mine lol
@-bollox
7 ай бұрын
Why didn't you leave the driveshaft flange in place on the drivers side ?
@WMCS
7 ай бұрын
It would have anchored itself behind the flywheel
@pabloetchepare7160
Жыл бұрын
can you share the parts number you use ? I meant, the Luk kits. Flywheel and Disk parts numbers. Thanks !. And if Im not mistaken, the clutch installed was Sachs and you replace it with Luk . Impeccable !. Those are the same ? you have a prefference from one or another ? thanks !
@WMCS
Жыл бұрын
I wouldn’t remember the part number to be honest.
@leonemic
3 жыл бұрын
😮 woow bro, very hard but nice Job 💪🏻
@Osmanov.82
3 жыл бұрын
Profesional und respekt😁
@WMCS
3 жыл бұрын
Thanks for the support
@rayford3265
3 жыл бұрын
Can you do a Peugeot partner 2014 , 1.6 hdi e semi automatic
@VAnton03.
3 жыл бұрын
Very nice job, good luck!
@franp.b4083
3 жыл бұрын
Great job... Congratulations
@Snekutaren
Жыл бұрын
Great work, great video.
@poppo2003
3 жыл бұрын
Great work every time 💪👍. What kind of degreaser do you use in the pump sprayer??
@markknights5109
3 жыл бұрын
A would I say clutch and brake cleaner wot do I know???
@WMCS
3 жыл бұрын
Definitely brake cleaner .,, but any solvent works just as good
@imperia777
3 жыл бұрын
Great job. Which engine is that Passat?
@deninsrmic4165
3 жыл бұрын
PD TDI
@imperia777
3 жыл бұрын
@@deninsrmic4165 I meant the engine code. BMP?
@deninsrmic4165
3 жыл бұрын
@@imperia777 oh, it’s BKP, can’t be BMP as this is 16v.😁
@imperia777
3 жыл бұрын
@@deninsrmic4165 I see. thanks
@deninsrmic4165
3 жыл бұрын
@@imperia777 👍
@maxthecaddy8451
3 жыл бұрын
Always a thumbs up from me 👍👍👍
@WMCS
3 жыл бұрын
Thanks Max ✨✨🍻🍻🍻
@GregRepairs
Жыл бұрын
Hi, I am about to replace the clutch and DMF on my VW Passat 2009 2.0 TDI Highline. Do they have spigot/pilot bearing fitted? I would appreciate your help.
@WMCS
Жыл бұрын
No spigot bearing ..
@GregRepairs
Жыл бұрын
@@WMCS thank you very much!
@darionn12
6 ай бұрын
Is this also same for a passat procedure 1.8 tsi 2009 manuel 6 speed cant find any for this engine only for diesel engine and transmission?
@WMCS
6 ай бұрын
Yes that’s correct
@elvidaskraucevicius604
3 жыл бұрын
So it was a flywheel problem, i wonder can you reuse old clutch?
@WMCS
3 жыл бұрын
Not really., as they are self adjusting
@patrickclarke3808
Жыл бұрын
Got clutch done in 06 Passat now I have fuck all power it’s pulling dragging any ideas what the problem ?
@cosminsperniac5349
3 жыл бұрын
Respect, excellent job!
@WMCS
3 жыл бұрын
🍻🍻✨😁
@sebarodriguez4969
3 жыл бұрын
Saludos desde chile exelente trabajo!
@OO-oi8mn
Жыл бұрын
Is it much different on seat altea xl 1,9 tdi?
@carlossantos366
3 жыл бұрын
Another great work Kevin... how much time to do it
@WMCS
3 жыл бұрын
This particular one from jacking up to driving off about 4hrs
@davidszabo5635
3 жыл бұрын
RESPECT ! 👌👍👏👏👏 profi !
@dragosdragos6058
2 жыл бұрын
amazing video do you have any material on the older b5.5 version with the inline 1.9 PD engine?
@WMCS
2 жыл бұрын
I went to do one about 3 months ago and ended up scrapping the repair. Purely because it’s a bit tight doing it on deck. On ramp no probs.
@dragosdragos6058
2 жыл бұрын
@@WMCS Ohh ok so it is very difficult to do on stands because of the in line setup?
@aljpry
3 жыл бұрын
رائع اتمنئ ان اعمل معك عملك ممتاز ومرتب
@Андрей-ш3к4ю
3 жыл бұрын
Мы тоже так собираем на коленке всю словянскую эпоху только нихрена не моем , на Руси это считается излишеством , баловством или рукоблудием .
@adamstolar3967
3 жыл бұрын
I'm a little afraid of the wheel hub, there is a need for more power 200 nm 180 degrees.
@WMCS
3 жыл бұрын
Don’t be afraid of the wheel hub., it won’t hurt you.., 😎😁..,
@ramiroirre1270
3 жыл бұрын
Ninja 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@WMCS
3 жыл бұрын
Thanks 🙏🏽
@lopesdaniel2680
3 жыл бұрын
bonjour beau travail comme chez vw le mecano travail a l ancienne sur chandelle
@ghilezanmadalin2864
2 ай бұрын
Hello!What you do at 8:05,it s necessary, if i want to remove the gearbox,or i can remove it,without making that?Thanks!
@WMCS
2 ай бұрын
Everything in video is necessary. Anything you wanna try differently I have not attempted. Sometimes you just have to try your own way.
@ghilezanmadalin2864
2 ай бұрын
@@WMCS I understand... But that flange must be taken down, because there is no place to remove the box? Thank you very much!
Пікірлер: 446