Thanks finally got rid of that annoying ABS light after replacing the ABS module from a used one!
@ADDAUTOMOBILESERVICES
4 жыл бұрын
You are welcome
@josegarcia-th3pj
Жыл бұрын
IF YOU HAVE 2 ESCAPES ONE WORKING THE OTHER MISING PCM, IT WOULD BE POSSIBLE TO MOVE THE PCM FROM THE WORKING ONE TO THE MISSING ONE, WHAT ELSE NEED TO BE DONE FOR THE MISSING PCM ESCAPE WORK
@ADDAUTOMOBILESERVICES
Жыл бұрын
You have to get a used PCM for the vehicle and program it
@josegarcia-th3pj
Жыл бұрын
WHAT ABOUT IF YOU CHANGE THE PCM, SO IS ALSO CAPABLE OF PROGRAMING THE VIN NUMBER
@ADDAUTOMOBILESERVICES
Жыл бұрын
For some
@mr.Troshin
2 жыл бұрын
Спасибо, надо прописать VIN в ABS на Ford Escape, метод подойдет.
@ADDAUTOMOBILESERVICES
2 жыл бұрын
Yes it will work
@ClarkBR549
Жыл бұрын
Thanks for walking us through what's going on here. Video is pretty much useless.
@ADDAUTOMOBILESERVICES
Жыл бұрын
Will upload new one soon
@RJ-vb7gh
3 жыл бұрын
I'm somewhat confused, at the end of the video after changing the ABS data, it looks like you lost the CAN bus and connection with the PCU rather than clearing the error fault in the ABS... Am I missing something?
@ADDAUTOMOBILESERVICES
3 жыл бұрын
The main issue was the ABS
@bruh7376
3 жыл бұрын
So you messed something else up just to repair this?
@ADDAUTOMOBILESERVICES
3 жыл бұрын
@@bruh7376 no was called for programming
@NewLevelAuto
4 жыл бұрын
One of my favorite inexpensive tools 🙂
@ADDAUTOMOBILESERVICES
4 жыл бұрын
Yes boss it work great
@kevinkernahan7422
3 жыл бұрын
So where is the info for the VIN issue? I saw the DTCs after module programming, but they were not resolved n this video
@ADDAUTOMOBILESERVICES
3 жыл бұрын
It was fixed after programming the as-built into the module
@kevinkernahan7422
3 жыл бұрын
@@ADDAUTOMOBILESERVICES ok, ty. So did you use the as built from the original abs or from the ford file?
@ADDAUTOMOBILESERVICES
3 жыл бұрын
@@kevinkernahan7422 from the ford file and now the software download it directly from the ford site.(you can download it and compare)also ford uses the VIN of the original vehicle to get you the as-built
@dhonnoll78
3 жыл бұрын
Does this mean you never did get them to match up? I changed PCM do all 6 cyl would fire now get Vin mismatch I took as built from donor vehicle ABS changed the recipient vehicle and now get a different error a misconfiguration it says.
@ADDAUTOMOBILESERVICES
3 жыл бұрын
Bcos the VIN configuration is different from you Vehicle
@MR20MR
Жыл бұрын
Does the used module have to be from the same year as the car ? I have a 2009 f150 that I'm planning to replace the abs module with a 2012 year one . Will it work? Is that the regular forscan software or is it the advance one? Thanks
@ADDAUTOMOBILESERVICES
Жыл бұрын
If the part numbers are the same it will work and the forscan is the paid version
@miguelaguilar4460
2 жыл бұрын
How do I get the as built abs for mazda 5 2007, I have a code u2202 and I can't deleted, :(
@ADDAUTOMOBILESERVICES
2 жыл бұрын
Pls in what module do you have the code You can get it on motorcraft service website
@marcoscastellano5832
2 жыл бұрын
Será q escuchamos la cancio y después vemos el video
@drewhin663
Жыл бұрын
What the hell just happened I don't know how to follow this
@ADDAUTOMOBILESERVICES
Жыл бұрын
Pls try it again
@aliabushaiba3754
2 жыл бұрын
what is vci100? can u put a link? thanks
@ADDAUTOMOBILESERVICES
2 жыл бұрын
It is the VCI that comes with ms906bt
@sgt.hollowpoint6968
4 жыл бұрын
How do I get this software, and how much? I recently replaced ABS module with a used one, but now apparently I have to program that used ABS module for my vehicle VIN.
@ADDAUTOMOBILESERVICES
4 жыл бұрын
You will get it from forscan.org
@sgt.hollowpoint6968
4 жыл бұрын
@@ADDAUTOMOBILESERVICES thanks for the reply
@geniusrafaelus
3 жыл бұрын
Do I need to register and pay to get the ASBuilt data?
@ADDAUTOMOBILESERVICES
3 жыл бұрын
No the AS-BUILT is on ford website
@geniusrafaelus
3 жыл бұрын
@@ADDAUTOMOBILESERVICES im about to swap ABS modules from a donor car. I have a focus mk3. I checked and theres no AS built for ABS. Do i need to back up my ASBuilt from original module then program it to the replacement?
@ADDAUTOMOBILESERVICES
3 жыл бұрын
@@geniusrafaelus yes u have to backup or check the AS-BUILT number on the original one and compare it to the one on your AS-BUILT data so that you will know where it start from
@warl01
3 жыл бұрын
@@ADDAUTOMOBILESERVICES i need to replace my abs unit in my smax 2008. Ford not showing asbuild data, and the forscan showing communication problem with abs. How i get asbuild data? Thank you
Пікірлер: 47