I'd like to thank you for the 2x 3" extender tip! The ones that where hard to get by, where noticeable more worn and a different brand than the ones on the frontside. And mine has run only 160k KM, plus im the second owner. It seems like the Honda dealer didn't knew about this trick and were lazy. A 25min job...thanks my man keep it up!
@EfurdGarage
20 күн бұрын
Your welcome. Old school shade tree trick. yea i have seen that before change the easy ones and forget the hard ones. should run well now
@MichaelWilliams-mo1vv
4 жыл бұрын
It's good that you show how to do the back ones.
@filipinoy7937
3 жыл бұрын
Always tried to figure out how to get to the back ones.
@ssquirrel88
Жыл бұрын
Using 2, 3inch extensions, brilliant!
@EfurdGarage
Жыл бұрын
Thanks!
@jlgrantland
2 жыл бұрын
Thanks for the info. It was great help on the back 4.
@EfurdGarage
2 жыл бұрын
Glad it helped. And thanks for watching
@mitch58100
2 жыл бұрын
Thank you, you made this a pleasure to do! I really enjoyed changing the plugs in my 08 Hybrid! I had seen other videos where they removed the tray you're putting the nuts in and I really didn't want to get into that. I had the right extensions and even loosened the coil hood just to make sure I could get on to the nuts in the back. Everything went smooth with no hiccups! Thank you again, this video really helped!
@EfurdGarage
2 жыл бұрын
Your welcome. Glad it could help. Thanks for watching
@bluweorangyzie9170
2 жыл бұрын
@Quartermiler hey, i am a first timer on this and dont have any tool box for it, which one would you recommend for spark plugs + other stuff for the car, a budget option would be great as I dont intend to keep the car for long.
@mitch58100
2 жыл бұрын
@@bluweorangyzie9170 Well, I actually bought a nice little socket set from Harbor Freight as a second set to have around. Make sure you get a second extension to go with it. The set is: QUINN 1/4 In., 3/8 In., 1/2 In. Drive SAE & Metric Hi-Vis Socket Set, 66 Pc. The spark plug socket has an insert that holds the spark plug in place while inserting and removing the plug. Worked well for me.
@EfurdGarage
2 жыл бұрын
@@bluweorangyzie9170 No tools, i would buy a 100 piece kit or so and a few special ones like spark plug socket and o2 socket
@stevebutler7346
Жыл бұрын
BRILLIANT VIDEO. Many Thanks VERY HELPFUL Budgie From England
@EfurdGarage
Жыл бұрын
Thank you, glad it could help!
@justinodo
4 ай бұрын
Thanks, really helped with my car
@EfurdGarage
4 ай бұрын
glad it could help
@billalexander8011
Жыл бұрын
Thank you for taking the time to make this very good video. Before watching your video I didn't even know where the spark plugs were (LOL). I guess I am going to find out what the old plugs look like after 200K miles of use. My car has been jerking a bit on acceleration. Not sure if it is missing or there is something with the CVT. Either way it can probably use some new plugs.
@EfurdGarage
Жыл бұрын
Your welcome. And yes typically plug life ranges from 100k-150k miles. So you may notice some improvement. Thanks for watching
@khalilrezin-mendez7046
2 жыл бұрын
Very helpful to watch. Thanks!
@EfurdGarage
2 жыл бұрын
Glad it was helpful! Thanks for watching
@evanmorecract4861
2 жыл бұрын
I like the metal music in the beginning lol
@EfurdGarage
2 жыл бұрын
Thanks lol
@cpafcma
Жыл бұрын
thank you. Very helpful.
@EfurdGarage
Жыл бұрын
Your welcome glad it could help
@ME-ov7vp
11 ай бұрын
thanks for this video
@EfurdGarage
11 ай бұрын
your welcome, thanks for watching
@shahzadash1853
2 ай бұрын
What is the spark plug socket size, i tried 5/8 but it look like too big for spark plug in 2007 civic hybrid car? Thanks
@EfurdGarage
2 ай бұрын
should be 5/8 that is the common size for most all plugs,
@hassanzr1961
Ай бұрын
Thanks for this helpful video. Do you have a link to buy the tools you used to replace the parts, please?
@EfurdGarage
Ай бұрын
no links. just simple tools i bought years ago. sparkplug socket can be bought at any parts store. socket sets from walmart or anywhere like that
@belgalvan5113
3 жыл бұрын
Also if mine feel stuck how can I get them off.
@EfurdGarage
3 жыл бұрын
That can be a trick, sometimes just a little force but you dont want to strip the threads in the heads. you may be able to let the car run for 30 seconds, just enough to get the heads warm and they can come loose easier that way
@robertosolis7453
3 жыл бұрын
Awesome job
@EfurdGarage
3 жыл бұрын
Thanks
@Hollywood1127
3 жыл бұрын
I'll be doing mine this weekend.
@EfurdGarage
3 жыл бұрын
hope the video helped
@Bricionova
3 жыл бұрын
We’re you able to get the rear ones out?
@victorabreu0825
2 жыл бұрын
Awesome video
@EfurdGarage
2 жыл бұрын
Thank you
@followerofchrist1961
3 жыл бұрын
Do you know what the firing order is on these? Like which one is cylinder 1, 2 and so on.
@EfurdGarage
3 жыл бұрын
Cylinder one is always the closest to the crank pulley and goes 1 2 3 4 from there
@followerofchrist1961
3 жыл бұрын
@@EfurdGarage Thank you.
@The_Tronic_Drummer
4 жыл бұрын
I really need to get a magnetic spark plug socket so I'm not fighting that rubber gasket all the time.
@EfurdGarage
4 жыл бұрын
yea some of them have to tight or too loose rubber gasket.
@josuecabrera636
3 жыл бұрын
Que tipo de bujías recomienda el fabricante para éste motor?
@EfurdGarage
3 жыл бұрын
i forget what it called for, but i went with e3 diamond fires
@whatoh3407
Жыл бұрын
Hey my error code says its Cylinder 3 and 4, which way does the order go? Left to right, or right to left? Thanks!
@EfurdGarage
Жыл бұрын
Looking at it left to right.
@whatoh3407
Жыл бұрын
@@EfurdGarage thanks! Much appreciated.
@AmericanPatriot01
4 жыл бұрын
Great. So there's 8 spark plugs?
@EfurdGarage
4 жыл бұрын
Yes there are 8 for this engine
@belgalvan5113
3 жыл бұрын
What numbers are the spark plugs in the back?
@EfurdGarage
3 жыл бұрын
if memory serves correct because its been awhile they are the same as the fronts, unless you mine firing order
@belgalvan5113
3 жыл бұрын
@@EfurdGarage well my code check said I needed to change 1-4 so I did the front ones. Having trouble with the back. So I guess I’m wondering if the back are 5-8 so I can worry about them another day
@EfurdGarage
3 жыл бұрын
@@belgalvan5113 i believe that should be correct.
@Ihearttaylorswif
4 жыл бұрын
Efurd can you please tell me tools your using?
@EfurdGarage
4 жыл бұрын
10m to remove nuts holding the coils, and just a 5/8 spark plug socket
@Ihearttaylorswif
4 жыл бұрын
@@EfurdGarage thank you very. You are awesome!
@filipinoy7937
3 жыл бұрын
What are the sizes of the two extensions you use for the back ones.
@EfurdGarage
3 жыл бұрын
They are 3" long.
@filipinoy7937
3 жыл бұрын
@@EfurdGarageSo you used two 3 inch extensions on the back plugs?
@EfurdGarage
3 жыл бұрын
@@filipinoy7937 that is correct. Checked my tool box on the ones i used they are 3" overall lenght.
@filipinoy7937
3 жыл бұрын
@@EfurdGarage so you usedbab2 inch to get the spark plug in the back then a 1 inch to hand tight and torque?
@EfurdGarage
3 жыл бұрын
i used 2 3" extensions the whole time
@kingerikthegreatest.ofall.7860
4 жыл бұрын
Are the spark plugs pre-gaped?
@EfurdGarage
4 жыл бұрын
yes pre gaped. the oem ones had a stupied fine point so there was almost no way to gap them, so if they are off they are off.
@damian5940
4 жыл бұрын
What spark plugs do you use to this car ?? I know they recommend irydium but can i use cheaper one if yes please tell me what model spark plus are compatible
@kingerikthegreatest.ofall.7860
4 жыл бұрын
Not much room on the back ones.
@EfurdGarage
4 жыл бұрын
no but i could be worse lol
@dflex4180
3 жыл бұрын
plenty of room if you remove the window cowl...pretty simple to remove
@raicebannon1936
3 жыл бұрын
Designed by small Japanese hands
@hoss1947
4 жыл бұрын
Do they recommend anti seize on the threads?
@EfurdGarage
4 жыл бұрын
i didnt see anything in notes on the plugs for it, and alot say not to use it beacuse, Anti-seize lubricants decrease the amount of friction between the threads, resulting in over tightening. i think i have seen a few that have some on them out of the box. but not many. i dont add any unless a spark plug recommends it or factory recommends it
@MrRunnjump
Жыл бұрын
Honda's 2006 shop manual does say "small amount of anti-seize." Thanks for the tip for the back spark plugs!
@M_tech1
3 жыл бұрын
Pls tell number writtrn on this spark
@EfurdGarage
3 жыл бұрын
if i remember i ran E368 on this one
@M_tech1
3 жыл бұрын
@@EfurdGarage can u send me picture
@EfurdGarage
3 жыл бұрын
@@M_tech1 no but here is a link www.summitracing.com/parts/etp-e368/year/2008/make/honda
@pedrogutierrez5998
2 жыл бұрын
Porque lleva ocho bujías
@EfurdGarage
2 жыл бұрын
8 plugs yes
@mennyvega9707
Жыл бұрын
He said why 8 if is a 4 cyli
@daviddavidov8398
2 жыл бұрын
No wonder it cost 358 to do at dealerships
@EfurdGarage
2 жыл бұрын
yea i dont see it, dosnt even take an hour. $358 is over kill. $60 on plugs and 1 hour of labor (rounded up).
Пікірлер: 84