Hey guys, this is my dad fixing my bike in the vid. I’m currently on a 2023 Honda 250r
@Smokevolt
6 жыл бұрын
Very nice and detailed video. I appreciate your time and effort in doing this.
@jameseady89
8 ай бұрын
Very informative and helpful.... Thanks!!! 🙌
@MollyMOTOCROSSTIPSANDTRICKS
4 жыл бұрын
Love your content really in-depth 👍👍👍
@stepenjoz1
4 ай бұрын
Are the clutch blocks tight to the hub or do they have a little play there?
@Alias11-
8 жыл бұрын
Can you make a video about changing the stator
@WestHaddnin
Жыл бұрын
Man I’m still trying to understand “how” the clutch engages to the drum? The shoes are connected to the piston , which in turn spins but how does the drum spin the shoes? Mine revs but doesn’t go anywhere. I followed exactly what you did hoping a light bulb would go off in the process . I put it back how you did but still doesn’t engage . Im missing a vital step of understand how it engages. I bought mine used, and it was missing washers that go between the hub and nut. Could that have something to do with it?
@davidporreca6358
8 жыл бұрын
That's pretty easy it's right behind the water pump cover, drain antifreeze remove cover and its two Allen bolts, getting ready for race season now.
@JeremySimmons33
7 жыл бұрын
excellent video
@boprop77
6 жыл бұрын
I know this is an older video. I recently picked up an 07 ktm 50 sr. When i put this washer stack in my bolts stick out further then the clutch shoes. The shoes dont seem overly worn out. What can i do to fix this issue
@alek_sej3876
10 ай бұрын
Do you need The clutch puller to get The clutch out?
@cristianbosio973
5 жыл бұрын
Very good video, here in Argentina I have a 65 cc motorcycle that is the copy of this engine and starts the movement at very high revolutions. I will start approving. Any advice? Thank you!!!
@sendit1158
2 жыл бұрын
So you use 250cc oil in the trans? Mine calls for 150cc? Are you just using more then recommended?
@benniemk2
Жыл бұрын
Same question here!!
@xgerowx
2 жыл бұрын
How much play should there be on the shoes after everything is done and tight ?
@davidporreca6358
2 жыл бұрын
Mike, it’s been a long time however if I remember it varies due to the wear and tear on the existing washers. I never measured the play after everything was torqued down. It was minimal.
@justinbrian9771
6 жыл бұрын
Where does the clutch stop go?
@nvrqit9361
8 жыл бұрын
I have this engine on a custom bicycle frame and the clutch doesn't engage when I throttle it pick up for a second ,then doesn't grab I did carefully watch you vid and I see the washers how I know if mind are worn and what's the overall number after the the complete clutch is all together I truly appreciate your help
@germancordon1129
7 жыл бұрын
hey men i have this configuration HH(())(())()()()/0.5mm
@davidporreca6358
8 жыл бұрын
Nah I change it too often, just bring them snug, fill with oil run it to temp, if there are no leaks your good
@DenisKz
4 жыл бұрын
You didn't change the needle bearing and washer.
@boprop77
6 жыл бұрын
I have an 07 ktm sx. I replaced the clutch and housing but the bike still doesnt engage. Ive tried 3 different stacks and still nothing. Does anyone have any info on this? Bike starts and runs great just out of the blue there was no engagement.
@WestHaddnin
Жыл бұрын
Any luck bro? I’m still trying to figure this out
@markieduran522
4 жыл бұрын
Okay I just got a 05 for my girl I Dnt want it to aggressive so how that works on washer
@davidporreca6358
4 жыл бұрын
Markie, it’s been a while for me, however if she is just starting out I would go with the springs instead of the washers, if u can’t seem to locate them go with the stack I used. It will take some playing around with to get what works for her, the big thing is keeping them clean
@markieduran522
4 жыл бұрын
David Porreca okay thank u Nd what are part number
@Alias11-
8 жыл бұрын
Do you torque the clutch cover nuts?? Or use loctite on them?
@davidporreca6358
8 жыл бұрын
+rvgaines Sorry for delay no loctite, no torque just snug. These clutches run hot and the gaskets always stick.
@radoslawjasek6408
Жыл бұрын
ile oleju wlewasz?🇵🇱
@germancordon1129
7 жыл бұрын
help me my ktm 50 i have this configuration HH(())(())()()() but i need more strong in my motorcycle thanks
@zoe0074
7 жыл бұрын
GERMÁN CORDÓN bring it up to 15 washers
@germancordon1129
7 жыл бұрын
ok Where I installed the washer????? (())(())()()() and the 15 ( where????
@jamesrosskirkpatrick9870
3 жыл бұрын
Poor camera setup, better if could have seen what you were doing.
Пікірлер: 33