For those of you who don't know what he was doing at 12:25, he was most likely making sure the chain was getting oil. You run the chain, hold it near something, and look for the oil splatter coming off.
@brianeastman3547
5 жыл бұрын
I recommend the Carbide tipped saw chain. Keep up the good work man
@travman67
3 жыл бұрын
Could you show the part where you put the new fuel lines on? I have a 450 Rancher II that will not achieve high speed and I want to try and change the fuel line in the tank.
@justinperish739
4 жыл бұрын
great info. background noise terrible. i would have liked to see how he pulled bulb and gas line out and how he puts them back. to me, that was more imoiortant than looking at a messed up one.
@jimmiller6328
4 жыл бұрын
Very informative video but like some others said please turn down the TV/radio.
@ogamhunter
5 жыл бұрын
When starting, you don't jerk the rope on these newer chainsaws. Just a light pull and you won't break it. To turn off your tv or radio, from now on. Couldn't hardly understand a word you where saying. Good video, we want to hear you though!
@lesteroliveintheshop9825
5 жыл бұрын
I tell them over and over not to jerk it, but they don't listen. But that's good for me, I get paid by the hour
@ozarkprepper1718
2 жыл бұрын
I bought a 445 husky brand new in 2008. I just tore it down and replaced the piston cylinder and crank seals. I switched mine years ago to a rim sprocket. Much smoother. The interesting thing is. My 445 had a 44mm cylinder. That means its a 450 with the wrong sticker on it.
@marynees4582
6 жыл бұрын
Thanks for the video. Could you please show how to replace that fuel line.
@lesteroliveintheshop9825
6 жыл бұрын
mary nees the next one I get I'll do
@eduardoe4200
2 жыл бұрын
Maybe you can help me. I bought a used 450 yesterday exactly as this one. And was working great today until I hit the fence and the chain came off. So I noticed the chain was damaged in the process and I replaced it with a new one. Now the the dam thing won’t start at all . I cleaned the air filter and replaced the spark plug and still no luck. What’s next to do ?
@pamtnman1515
3 жыл бұрын
So the rotor dogs stick straight up. Mine came back from the shop bent over at a 90 degree angle, and after a few pulls to start the saw the plastic pulley was destroyed
@lovetofishneosheo1829
4 жыл бұрын
You better be careful starting a saw without the bar cover. I started a big partner saw one Time and the clutch came apart and a shoe went through the roof of the building. Almost hit me in the chin. Good video tho I've worked on saws for over 30 years . I'm going to start making some videos
@wayahedia9989
4 жыл бұрын
How do you get the filter holder off with the purge button there. You cut that from the vid so .. I can’t see how that is supposed to work..
@lesteroliveintheshop9825
4 жыл бұрын
Waya Hedia I apologize, that was one of my earlier videos, and my editing was terrible. I cut out a lot of important info without realizing. However, my newer videos are put together better.
@wayahedia9989
4 жыл бұрын
@@lesteroliveintheshop9825 ha.. no need for an apology, thanks. It is hard enough doing the work without the shooting and editing part of it!
@xgameonx5799
4 жыл бұрын
👍. I have this saw and did the same work to it as u did. Mine still doesn't rev up still... Any ideas?
@lesteroliveintheshop9825
4 жыл бұрын
XGAMEONX are the diaphragms plenty flexible?
@123Goldhunter11
5 жыл бұрын
That's why I've gone to Stihl and when something goes wrong take it to the shop.
@chadmangum4158
4 жыл бұрын
That's not how a 450 with compression is intended to be started. Primer bulb 6 times, compression cylinder engaged, choke up, pull until it turns over (compression cylinder pops up), turn choke off, pull. Should start and run at that point. If it doesn't, there's an issue.
@coreyriley7160
6 жыл бұрын
I have the same saw. not enough oil slings down the bar, gets so hot it smokes. bar is blue/black. no adjustable oiler. how can I get more oil slinging ?? love the video
@lesteroliveintheshop9825
6 жыл бұрын
Corey Riley thank you. That seems to be a common problem with this model. I so far have not found a solution.
@coreyriley7160
6 жыл бұрын
ok, thank you for the reply. would I dare shoot air from the bar side into oil tank? or no.
@lesteroliveintheshop9825
6 жыл бұрын
Wouldn't hurt, just make sure the oil tank is empty, and leave the oil cap off when you do it.
@SaboSells
6 жыл бұрын
It would be nicer of you could turn off your TV when making videos.
@alanott7833
Жыл бұрын
Try redoing the whole thing only without the stupid radio playing in the background so we can hear what's going on.
@davidransom6065
2 жыл бұрын
Why don't you turn off the radio in the background??? Waste of time trying to listen.
@lesteroliveintheshop9825
2 жыл бұрын
Old video. I do now.
@waynelookout
2 жыл бұрын
Turn the radio off
@richb5158
2 жыл бұрын
Come on man... turn the crap off in the background, and show the entire process of replacing fuel lines and such... otherwise it's just jaw flapping.
@johnclarke6647
5 жыл бұрын
Customers lie, don't they? Had hardly been used, Right! It had been run hard and put up wet.
Пікірлер: 42